Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting

Materials produced by selective laser melting (SLM) experience a thermal history that is markedly different from that encountered by conventionally produced materials. In particular, a very high cooling rate from the melt is combined with cyclical reheating upon deposition of subsequent layers. Using atom-probe tomography (APT), we investigated how this nonconventional thermal history influences the phase-transformation behavior of maraging steels (Fe–18Ni–9Co–3.4Mo–1.2Ti) produced by SLM. We found that despite the “intrinsic heat treatment” and the known propensity of maraging steels for rapid clustering and precipitation, the material does not show any sign of phase transformation in the as-produced state. Upon aging, three different types of precipitates, namely (Fe,Ni,Co) 3 (Ti,Mo), (Fe,Ni,Co) 3 (Mo,Ti), and (Fe,Ni,Co) 7 Mo 6 (µ phase), were observed as well as martensite-to-austenite reversion around regions of the retained austenite. The concentration of the newly formed phases as quantified by APT closely matches thermodynamic equilibrium calculations.

[1]  Julie M. Schoenung,et al.  Thermal Behavior and Microstructure Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part II. Experimental Investigation and Discussion , 2008 .

[2]  J. Schoenung,et al.  Thermal Behavior and Microstructural Evolution during Laser Deposition with Laser-Engineered Net Shaping: Part I. Numerical Calculations , 2008 .

[3]  Emmanuelle A. Marquis,et al.  Applications of atom-probe tomography to the characterisation of solute behaviours , 2010 .

[4]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[5]  M. N. Rao.  Progress in understanding the metallurgy of 18% nickel maraging steels , 2006 .

[6]  C. M. Wayman,et al.  Precipitation reactions and strengthening behavior in 18 Wt Pct nickel maraging steels , 1990 .

[7]  Jean-Pierre Kruth,et al.  Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel , 2011 .

[8]  David J. Larson,et al.  Local Electrode Atom Probe Tomography: A User's Guide , 2013 .

[9]  M. Miller,et al.  Effect of aging and deformation on the microstructure and properties of Fe-Ni-Ti maraging steel , 2004 .

[10]  G. D. Smith,et al.  Phase chemistry and precipitation reactions in maraging steels: Part III. Model alloys , 1993, Metallurgical and Materials Transactions A.

[11]  G. D. Smith,et al.  Phase chemistry and precipitation reactions in maraging steels: Part I. Introduction and study of Co-containing C-300 steel , 1993, Metallurgical and Materials Transactions A.

[12]  C. Servant,et al.  Influence of the increasing content of Mo on the precipitation phenomena occurring during tempering in the maraging alloy Fe-12Mn-9Co-5Mo , 1988 .

[13]  N. Muktinutalapati.  18 % Nickel Maraging Steels , 2013 .

[14]  S. Mazumder,et al.  Precipitation in 18 wt% Ni maraging steel of grade 350 , 2000 .

[15]  U. Viswanathan,et al.  Precipitation hardening in 350 grade maraging steel , 1993, Metallurgical and Materials Transactions A.

[16]  G. D. Smith,et al.  Phase chemistry and precipitation reactions in maraging steels: Part IV. Discussion and conclusions , 1993, Metallurgical and Materials Transactions A.

[17]  Dieter Isheim,et al.  Analysis of Three-dimensional Atom-probe Data by the Proximity Histogram , 2000, Microscopy and Microanalysis.

[18]  C. Servant,et al.  A comparison of the structural evolution occurring during anisothermal or isothermal treatments in the case of nickel and manganese type maraging alloys , 1985 .

[19]  E. Pereloma,et al.  Observation of Precipitation Evolution in Fe-Ni-Mn-Ti-Al Maraging Steel by Atom Probe Tomography , 2009 .

[20]  J. Mei,et al.  Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti–6Al–4V samples , 2005 .

[21]  G. Inden,et al.  Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation , 2014, 1402.0232.

[22]  S. Ringer,et al.  Nearest neighbour diagnostic statistics on the accuracy of APT solute cluster characterisation , 2013 .

[23]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[24]  Z. Guo,et al.  Maraging steels: Modelling of microstructure, properties and applications , 2009 .