Recent development of polymer electrolyte membranes for fuel cells.

[1]  Mingyao Zhang,et al.  Preparation and characterization of sulfonated poly(arylene ether ketone ketone sulfone)s for ion exchange membranes , 2009 .

[2]  Y. Lee,et al.  Sulfonated poly(arylene ether sulfone)-silica nanocomposite membrane for direct methanol fuel cell (DMFC) , 2007 .

[3]  Sung Chul Kim,et al.  Nanoscale Phase Separation of Sulfonated Poly(arylene ether sulfone) / Poly(ether sulfone) Semi-IPNs for DMFC Membrane Applications , 2009 .

[4]  Q. Xin,et al.  Use of in situ polymerized phenol-formaldehyde resin to modify a Nafion® membrane for the direct methanol fuel cell , 2007 .

[5]  Huamin Zhang,et al.  Investigation of self-humidifying membranes based on sulfonated poly(ether ether ketone) hybrid with sulfated zirconia supported Pt catalyst for fuel cell applications , 2007 .

[6]  S. Woo,et al.  Evaluation of a palladinized Nafion™ for direct methanol fuel cell application , 2004 .

[7]  B. Scrosati,et al.  Temperature‐dependent Performances of a Fuel Cell Using a Superacid Zirconia‐doped Nafion Polymer Electrolyte , 2009 .

[8]  Moon-Sung Kang,et al.  Proton exchange membranes with high cell performance based on Nafion/poly(p-phenylene vinylene) composite polymer electrolyte , 2007 .

[9]  Hoyoung Kim,et al.  Effect of morphology and pore size of sulfonated mesoporous benzene-silicas in the preparation of poly(vinyl alcohol)-based hybrid nanocomposite membranes for direct methanol fuel cell application. , 2009, The journal of physical chemistry. B.

[10]  Hsiu-Li Lin,et al.  Silicate and zirconium phosphate modified Nafion/PTFE composite membranes for high temperature PEMFC , 2009 .

[11]  Tao Yang.  Composite membrane of sulfonated poly(ether ether ketone) and sulfated poly(vinyl alcohol) for use in direct methanol fuel cells , 2009 .

[12]  F. Alloin,et al.  Anionic membrane based on polyepichlorhydrin matrix for alkaline fuel cell: Synthesis, physical and electrochemical properties , 2007 .

[13]  S. Nunes,et al.  Single-step synthesis of sulfonated polyoxadiazoles and their use as proton conducting membranes , 2008 .

[14]  M. Ueda,et al.  Synthesis and properties of sulfonated poly(2,5-diphenethoxy-p-phenylene) , 2007 .

[15]  Jen-Ming Yang,et al.  Modification and characterization of semi-crystalline poly(vinyl alcohol) with interpenetrating poly(acrylic acid) by UV radiation method for alkaline solid polymer electrolytes membrane , 2008 .

[16]  T. Schiestel,et al.  Behavior of sulfonated poly(ether ether ketone) in ethanol–water systems , 2009 .

[17]  Feng Zhang,et al.  Preparation and evaluation of a proton exchange membrane based on oxidation and water stable sulfonated polyimides , 2007 .

[18]  Zhenhua Jiang,et al.  Poly(arylene ether)s with pendant sulfoalkoxy groups prepared by direct copolymerization method for proton exchange membranes , 2008 .

[19]  H. Kita,et al.  Synthesis and properties of novel sulfonated polyimides derived from naphthalenic dianhydride for fuel cell application , 2008 .

[20]  Tomoya Higashihara,et al.  Influence of adjusted hydrophilic–hydrophobic lengths in sulfonated multiblock copoly(ether sulfone) membranes for fuel cell application , 2008 .

[21]  Hong Li,et al.  Study on structural evolution of perfluorosulfonic ionomer from concentrated DMF-based solution to membranes , 2008 .

[22]  S. Hsu,et al.  Preparation and characterization of fluorine-containing polybenzimidazole/imidazole hybrid membranes for proton exchange membrane fuel cells , 2008 .

[23]  M. Nagai,et al.  Silicone based alkaline electrolyte membrane for fuel cell , 2009 .

[24]  J. Wootthikanokkhan,et al.  Preparation and characterizations of direct methanol fuel cell membrane from sulfonated polystyrene/poly(vinylidene fluoride) blend compatibilized with poly(styrene)-b-poly(methyl methacrytlate) block copolymer , 2008 .

[25]  K. S. Dhathathreyan,et al.  Methanol crossover studies on heat-treated Nafion® membranes , 2008 .

[26]  Dan Wu,et al.  Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)—A versatile starting polymer for proton conductive membranes (PCMs) , 2008 .

[27]  V. Ramani,et al.  SPEEK/functionalized silica composite membranes for polymer electrolyte fuel cells , 2007 .

[28]  Arunachala Mada Kannan,et al.  Synthesis and characterization of platinum nanoparticles on in situ grown carbon nanotubes based carbon paper for proton exchange membrane fuel cell cathode , 2009 .

[29]  P. Cañizares,et al.  PBI-based polymer electrolyte membranes fuel cells: Temperature effects on cell performance and catalyst stability , 2007 .

[30]  Won-Yong Lee,et al.  Physicochemical studies of PVdF–HFP-based polymer–ionic liquid composite electrolytes , 2009 .

[31]  B. Yi,et al.  Conductivity of aromatic-based proton exchange membranes at subzero temperatures , 2008 .

[32]  M. Yoshitake,et al.  Perfluorinated Ionic Polymers for PEFCs (Including Supported PFSA) , 2008 .

[33]  Cy H. Fujimoto,et al.  Polymers with Tethered Anionic and Cationic Groups as Membranes for Fuel Cells , 2009 .

[34]  R. Slade,et al.  Prospects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells , 2005 .

[35]  Xiaoxia Guo,et al.  Synthesis and properties of novel sulfonated polyimide membranes for direct methanol fuel cell application , 2007 .

[36]  Jingli Luo,et al.  Methanol permeability and proton conductivity of Nafion membranes modified electrochemically with polyaniline , 2008 .

[37]  K. Scott,et al.  A high conductivity Cs2.5H0.5PMo12O40/polybenzimidazole (PBI)/H3PO4 composite membrane for proton-exchange membrane fuel cells operating at high temperature , 2008 .

[38]  Ram Devanathan,et al.  Recent developments in proton exchange membranes for fuel cells , 2008 .

[39]  Patric Jannasch,et al.  Polysulfones grafted with poly(vinylphosphonic acid) for highly proton conducting fuel cell membranes in the hydrated and nominally dry state , 2008 .

[40]  Hsiu-Li Lin,et al.  Durability and stability test of proton exchange membrane fuel cells prepared from polybenzimidazole/poly(tetrafluoro ethylene) composite membrane , 2009 .

[41]  O. Diat,et al.  Structural Study of Zirconium Phosphate−Nafion Hybrid Membranes for High-Temperature Proton Exchange Membrane Fuel Cell Applications , 2007 .

[42]  R. Kumar,et al.  Correlation between ionic conductivity and fluidity of polymer gel electrolytes containing NH4CF3SO3 , 2005 .

[43]  I. Eroglu,et al.  Effects of sulfonated polyether-etherketone (SPEEK) and composite membranes on the proton exchange membrane fuel cell (PEMFC) performance , 2009 .

[44]  S. Holdcroft,et al.  Ionomers for Proton Exchange Membrane Fuel Cells with Sulfonic Acid Groups on the End Groups: Novel Branched Poly(ether−ketone)s , 2008 .

[45]  Xianfeng Li,et al.  Properties of composite membranes based on sulfonated poly(ether ether ketone)s (SPEEK)/phenoxy resin (PHR) for direct methanol fuel cells usages , 2007 .

[46]  Zhongyi Jiang,et al.  A facile surface modification of Nafion membrane by the formation of self-polymerized dopamine nano-layer to enhance the methanol barrier property , 2009 .

[47]  Yanghua Tang,et al.  Polybenzimidazole-membrane-based PEM fuel cell in the temperature range of 120–200 °C , 2007 .

[48]  N A Kononenko,et al.  Characterization of ion-exchange membrane materials: properties vs structure. , 2008, Advances in colloid and interface science.

[49]  E. Higuchi,et al.  Tuned polymer electrolyte membranes based on aromatic polyethers for fuel cell applications. , 2007, Journal of the American Chemical Society.

[50]  J. Mcgrath,et al.  Conductive area ratio of multiblock copolymer electrolyte membranes evaluated by e-AFM and its impact on fuel cell performance , 2009 .

[51]  Timothy J. Peckham,et al.  Relationships of Acid and water content to proton transport in statistically sulfonated proton exchange membranes: variation of water content via control of relative humidity. , 2008, Journal of Physical Chemistry B.

[52]  Young Taik Hong,et al.  Phase separation and morphology control of polymer blend membranes of sulfonated and nonsulfonated polysulfones for direct methanol fuel cell application , 2007 .

[53]  P. Štěpánek,et al.  Morphology of polystyrene-block-poly(styrene-co-acrylonitrile) and polystyrene-block-poly(styrene-co-acrylonitrile-co-5-vinyltetrazole) diblock copolymers prepared by nitroxide-mediated radical polymerization and “click” chemistry , 2008 .

[54]  Anil Verma,et al.  Synthesis and Ex‐situ Characterization of Nafion/TiO2 Composite Membranes for Direct Ethanol Fuel Cell , 2009 .

[55]  T. Terai,et al.  Thermal stability of proton exchange fuel-cell membranes based on crosslinked-polytetrafluoroethylene for membrane-electrode assembly preparation , 2009 .

[56]  Zhenhua Jiang,et al.  Novel acid-base molecule-enhanced blends/copolymers for fuel cell applications , 2009 .

[57]  H. Kita,et al.  Synthesis and properties of sulfonated polyimides derived from bis(sulfophenoxy) benzidines , 2009 .

[58]  Junichi Ishikawa,et al.  Highly sulfonated poly(aryl ether ketone) block coplymers having a cross-linking structure , 2007 .

[59]  W. Ho,et al.  New poly(ethylene oxide) soft segment-containing sulfonated polyimide copolymers for high temperature proton-exchange membrane fuel cells , 2008 .

[60]  S. Licoccia,et al.  Composite Proton-Conducting Hybrid Polymers: Water Sorption Isotherms and Mechanical Properties of Blends of Sulfonated PEEK and Substituted PPSU , 2008 .

[61]  R. Marschall,et al.  Insight into Proton Conduction of Immobilised Imidazole Systems Via Simulations and Impedance Spectroscopy , 2008 .

[62]  Moon Jeong Park,et al.  Increased water retention in polymer electrolyte membranes at elevated temperatures assisted by capillary condensation. , 2007, Nano letters.

[63]  D. Yan,et al.  Synthesis and characterization of sulfonated poly(phthalazinone ether phosphine oxide)s by direct polycondensation for proton exchange membranes , 2008 .

[64]  K. Müllen,et al.  Proton-exchanging electrolyte membranes based on aromatic condensation polymers , 2005 .

[65]  A. Su,et al.  Nafion/PTFE/silicate membranes for high-temperature proton exchange membrane fuel cells , 2008 .

[66]  F. Niepceron,et al.  Composite fuel cell membranes based on an inert polymer matrix and proton-conducting hybrid silica particles , 2009 .

[67]  A. Saccà,et al.  Sulphonated polysulphone membranes for medium temperature in polymer electrolyte fuel cells (PEFC) , 2008 .

[68]  Jingyu Xi,et al.  A new proton conducting membrane based on copolymer of methyl methacrylate and 2-acrylamido-2-methyl-1-propanesulfonic acid for direct methanol fuel cells , 2007 .

[69]  A. Wokaun,et al.  The influence of crosslinker on the properties of radiation-grafted films and membranes based on ETFE , 2008 .

[70]  Moon Jeong Park,et al.  Humidity-Induced Phase Transitions in Ion-Containing Block Copolymer Membranes , 2008 .

[71]  H. Ha,et al.  Preparation and Characterization of Nafion/Poly(1-vinylimidazole) Composite Membrane for Direct Methanol Fuel Cell Application , 2005 .

[72]  S. Mehdipour‐Ataei,et al.  Preparation of new membranes based on sulfonated aromatic copolyimides , 2008 .

[73]  Ali Durmus,et al.  Self-assembled polyelectrolyte multilayered films on Nafion with lowered methanol cross-over for DMFC applications , 2009 .

[74]  J. Kerres,et al.  Blended and Cross‐Linked Ionomer Membranes for Application in Membrane Fuel Cells , 2005 .

[75]  K. Tadanaga,et al.  Proton conductive inorganic–organic hybrid membranes prepared from 3-aminopropyltriethoxysilane and phosphoric acid by the sol–gel method , 2008 .

[76]  S. Chirachanchai,et al.  Preparation of 4(5)-vinylimidazole-co-acrylic acid copolymer and thermal performances related to applicability as PEM fuel cells , 2008 .

[77]  Ying‐Ling Liu,et al.  Preparation and properties of chitosan/carbon nanotube nanocomposites using poly(styrene sulfonic acid)-modified CNTs , 2009 .

[78]  Suli Wang,et al.  Nafion® and nano-size TiO2–SO42− solid superacid composite membrane for direct methanol fuel cell , 2008 .

[79]  Jae‐Suk Lee,et al.  Synthesis and characterization of sulfonated poly(arylene ether ketone) copolymers containing crosslinking moiety , 2009 .

[80]  Q. Zhang,et al.  Synthesis and characterization of cross-linked quaternized poly(vinyl alcohol)/chitosan composite anion exchange membranes for fuel cells , 2008 .

[81]  A. Bozkurt,et al.  Synthesis and proton conductivity of poly(styrene sulfonic acid)/heterocycle‐based membranes , 2008 .

[82]  M. Xiao,et al.  The silica-doped sulfonated poly(fluorenyl ether ketone)s membrane using hydroxypropyl methyl cellulose as dispersant for high temperature proton exchange membrane fuel cells , 2009 .

[83]  M. Hickner,et al.  Synthesis and Characterization of Partially Disulfonated Hydroquinone-Based Poly(arylene ether sulfone)s Random Copolymers for Application as Proton Exchange Membranes , 2009 .

[84]  G. Lu,et al.  Novel Nafion composite membranes with mesoporous silica nanospheres as inorganic fillers , 2008 .

[85]  K. Richau,et al.  Heterogeneous ion-exchange membranes based on sulfonated poly(1,4-phenylene sulfide) , 2006 .

[86]  Joseph Jagur-Grodzinski,et al.  Polymeric materials for fuel cells: concise review of recent studies† , 2007 .

[87]  Maolin Zhai,et al.  Synthesis of fluorinated polymer electrolyte membranes by radiation grafting and atom transfer radical polymerization techniques , 2009 .

[88]  Yanxiang Li,et al.  Viscometric behavior of disulfonated poly(arylene ether sulfone) random copolymers used as proton exchange membranes , 2008 .

[89]  Huamin Zhang,et al.  A novel H3PO4/Nafion–PBI composite membrane for enhanced durability of high temperature PEM fuel cells , 2007 .

[90]  L. Zhuang,et al.  A feasibility analysis for alkaline membrane direct methanol fuel cell: thermodynamic disadvantages versus kinetic advantages , 2003 .

[91]  Ji Young Kim,et al.  Sulfonated poly(fluorinated arylene ether)s/poly(N-vinylimidazole) blend polymer and PTFE layered membrane for operating PEMFC at high temperature , 2008 .

[92]  K. Müllen,et al.  Phosphonic acid-containing homo-, AB and BAB block copolymers via ATRP designed for fuel cell applications , 2009 .

[93]  L. Robitaille,et al.  Heteropolyacid/saponite-like clay complexes and their blends in amphiphilic SEBS , 2009 .

[94]  F. Weng,et al.  The study of PTFE/Nafion/Silicate membranes operating at low relative humidity and elevated temperature , 2008 .

[95]  Dongfang Zhang.  Surface modification for the perfluorosulfonate proton-conducting electrolyte membrane , 2009 .

[96]  Chang-Soo Kim,et al.  Preparation and characterization of proton-conducting sulfonated poly(ether ether ketone)/phosphatoantimonic acid composite membranes , 2007 .

[97]  Ching An Huang,et al.  Study of poly(vinyl alcohol)/titanium oxide composite polymer membranes and their application on alkaline direct alcohol fuel cell , 2008 .

[98]  W. Xing,et al.  Sulfonated poly(arylene-co-imide)s as water stable proton exchange membrane materials for fuel cells , 2008 .

[99]  M. Nasef,et al.  Single-step radiation induced grafting for preparation of proton exchange membranes for fuel cell , 2009 .

[100]  T. Xu,et al.  Free-standing anion-exchange PEO–SiO2 hybrid membranes , 2008 .

[101]  Qingfeng Li,et al.  Partially Fluorinated Arylene Polyethers and Their Ternary Blend Membranes with PBI and H3PO4. Part I. Synthesis and Characterisation of Polymers and Binary Blend Membranes , 2008 .

[102]  W. Xing,et al.  Synthesis and characterization of novel sulfonated polyimides from 1,4-bis(4-aminophenoxy)-naphthyl-2,7-disulfonic acid , 2007 .

[103]  Maolin Zhai,et al.  Hydrocarbon proton-conductive membranes prepared by radiation-grafting of styrenesulfonate onto aromatic polyamide films , 2009 .

[104]  H. Kubota,et al.  Novel UV-induced photografting process for preparing poly(tetrafluoroethylene)-based proton-conducting membranes , 2007 .

[105]  B. Yi,et al.  Pt/SiO2 as addition to multilayer SPSU/PTFE composite membrane for fuel cells , 2008 .

[106]  L. Hong,et al.  Membrane Design for Direct Ethanol Fuel Cells: A Hybrid Proton‐Conducting Interpenetrating Polymer Network , 2008 .

[107]  A. Dicks,et al.  Nafion/polyaniline/silica composite membranes for direct methanol fuel cell application , 2007 .

[108]  D. Brandell,et al.  Nafion®–polybenzimidazole (PBI) composite membranes for DMFC applications , 2007 .

[109]  Seung-Woo Lee,et al.  Improvement of polymer electrolyte membrane by radiation-induced grafting of styrene onto FEP film with subsequent sulfonation , 2008 .

[110]  Zhongyi Jiang,et al.  Zeolite beta-filled chitosan membrane with low methanol permeability for direct methanol fuel cell , 2008 .

[111]  E. Quartarone,et al.  Composite Proton‐Conducting Membranes for PEMFCs , 2007 .

[112]  B. Hwang,et al.  A novel crosslinking strategy for preparing poly(vinyl alcohol)-based proton-conducting membranes with high sulfonation , 2010 .

[113]  Y. Shul,et al.  Characterizations and stability of polyimide–phosphotungstic acid composite electrolyte membranes for fuel cell , 2007 .

[114]  P. Mirau,et al.  Structures and properties of highly sulfonated poly(arylenethioethersulfone)s as proton exchange membranes , 2007 .

[115]  Gérard Gebel,et al.  Water sorption-desorption in Nafion ® membranes at low temperature, probed by micro X-ray diffraction , 2007 .

[116]  M. Nogami,et al.  Structural and Transport Properties of Mixed Phosphotungstic Acid/Phosphomolybdic Acid/SiO2 Glass Membranes for H2/O2 Fuel Cells , 2007 .

[117]  B. Peppley,et al.  Anion-exchange membranes composed of quaternized-chitosan derivatives for alkaline fuel cells , 2010 .

[118]  S. Çelik,et al.  Phosphoric acid-doped poly(1-vinyl-1,2,4-triazole) as water-free proton conducting polymer electrolytes , 2008 .

[119]  S. Shishatskiy,et al.  Modification of proton conductive polymer membranes with phosphonated polysilsesquioxanes , 2008 .

[120]  S. S. Murthy,et al.  Synthesis and characterization of composite membranes based on α-zirconium phosphate and silicotungstic acid , 2007 .

[121]  M. Guiver,et al.  High performance nitrile copolymers for polymer electrolyte membrane fuel cells , 2008 .

[122]  Nora Gourdoupi,et al.  Novel Pyridine-Based Poly(ether sulfones) and their Study in High Temperature PEM Fuel Cells , 2008 .

[123]  Erdong Wang,et al.  Poly(vinyl alcohol) (PVA)/sulfonated polyhedral oligosilsesquioxane (sPOSS) hybrid membranes for direct methanol fuel cell applications , 2007 .

[124]  Arne Thomas,et al.  Proton Conductivity Enhancement by Nanostructural Control of Poly(benzimidazole)‐Phosphoric Acid Adducts , 2008 .

[125]  Brian C. Benicewicz,et al.  Polybenzimidazole/Acid Complexes as High-Temperature Membranes , 2008 .

[126]  E. Spohr,et al.  Proton Transport in Polymer Electrolyte Fuel Cell Membranes , 2005 .

[127]  Minji Yoo,et al.  Synthesis of novel crosslinked sulfonated poly(ether sulfone)s using bisazide and their properties for fuel cell application , 2008 .

[128]  Jianshe Liu,et al.  Alkaline solid polymer electrolyte membranes based on structurally modified PVA/PVP with improved alkali stability , 2010 .

[129]  H. Pu,et al.  Preparation and properties of Nafion®/hollow silica spheres composite membranes , 2008 .

[130]  G. Goward,et al.  Proton Dynamics of Nafion and Nafion/SiO2 Composites by Solid State NMR and Pulse Field Gradient NMR , 2007 .

[131]  T. Xu,et al.  Acid–base hybrid polymer electrolyte membranes based on SPEEK , 2010 .

[132]  M. Guiver,et al.  Highly fluorinated comb-shaped copolymer as proton exchange membranes (PEMs): Fuel cell performance , 2008 .

[133]  Rongrong Chen,et al.  Preparation of a functional poly(ether imide) membrane for potential alkaline fuel cell applications: Chloromethylation , 2009 .

[134]  N. Chandrakumar,et al.  Effect of varying poly (styrene sulfonic acid) content in poly (vinyl alcohol)-poly (styrene sulfonic acid) blend membrane and its ramification in hydrogen-oxygen polymer electrolyte fuel cells , 2008 .

[135]  S. Kær,et al.  Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell , 2009 .

[136]  Ion beam effects on electrical characteristics of proton conductive polymer , 2007 .

[137]  J. Kerres,et al.  Synthesis and characterization of sulfonated poly(arylene thioether)s and their blends with polybenzimidazole for proton exchange membranes , 2007 .

[138]  Junjing Li,et al.  Preparation and properties of bisphenol A‐based sulfonated poly(arylene ether sulfone) proton exchange membranes for direct methanol fuel cell , 2009 .

[139]  J. Mcgrath,et al.  Hydrophilic–hydrophobic multiblock copolymers based on poly(arylene ether sulfone)s as novel proton exchange membranes – Part B , 2008 .

[140]  Q. Liu,et al.  Preparation and characterization of cross-linked quaternized poly(vinyl alcohol) membranes for anion exchange membrane fuel cells , 2008 .

[141]  Wei Xing,et al.  Highly conductive, methanol resistant fuel cell membranes fabricated by layer-by-layer self-assembly of inorganic heteropolyacid , 2009 .

[142]  H. Rhee,et al.  Preparation of Nafion® nanocomposite membrane modified by phosphoric acid-functionalized 3-APTES , 2008 .

[143]  Y. Takeoka,et al.  Hydration behavior of perfluorinated and hydrocarbon-type proton exchange membranes: Relationship between morphology and proton conduction , 2009 .

[144]  Nanwen Li,et al.  Novel acid-base polyimides synthesized from binaphthalene dianhydrie and triphenylamine-containing diamine as proton exchange membranes , 2008 .

[145]  J. Ferraris,et al.  Proton conductivity of acid-doped meta-polyaniline , 2008 .

[146]  M. Nasef,et al.  Preparation of composite polymer electrolytes by electron beam-induced grafting : proton and lithium ion-conducting membranes , 2007 .

[147]  B. Benicewicz,et al.  Synthesis of Poly (2,2′‐(1,4‐phenylene) 5,5′‐bibenzimidazole) (para‐PBI) and Phosphoric Acid Doped Membrane for Fuel Cells , 2009 .

[148]  H. Na,et al.  Blend membranes based on disulfonated poly(aryl ether ether ketone)s (SPEEK) and poly(amide imide) (PAI) for direct methanol fuel cell usages , 2007 .

[149]  Peter Lund,et al.  Crosslinking and alkyl substitution in nano-structured grafted fluoropolymer for use as proton-exchange membranes in fuel cells , 2009 .

[150]  Mauro André Dresch,et al.  Nafion–TiO2 hybrid electrolytes for stable operation of PEM fuel cells at high temperature , 2009 .

[151]  L. Pisani.  The limits of proton conductivity in polymeric sulfonated membranes: A modelling study , 2009 .

[152]  Ulrich Stimming,et al.  ELECTROPHYSICAL PROPERTIES OF POLYMER ELECTROLYTE MEMBRANES : A RANDOM NETWORK MODEL , 1997 .

[153]  S. Nakazawa,et al.  An Extremely Low Methanol Crossover and Highly Durable Aromatic Pore‐Filling Electrolyte Membrane for Direct Methanol Fuel Cells , 2007 .

[154]  S. Franssila,et al.  Thin Solid Films , 2009 .

[155]  D. Sangeetha,et al.  A novel anion exchange membrane from polystyrene (ethylene butylene) polystyrene: Synthesis and characterization , 2010 .

[156]  Peter Lund,et al.  Preparation and analysis of new proton conducting membranes for fuel cells , 2007 .

[157]  S. Licoccia,et al.  Effect of an ormosil-based filler on the physico-chemical and electrochemical properties of Nafion membranes , 2007 .

[158]  Jian‐mei Lu,et al.  Protic Ionic Liquid-Based Hybrid Proton-Conducting Membranes for Anhydrous Proton Exchange Membrane Application , 2010 .

[159]  Tongwen Xu,et al.  In situ polymerization: A novel route for thermally stable proton-conductive membranes , 2008 .

[160]  Hsiu-Li Lin,et al.  Preparation of Nafion/PTFE/Zr(HPO4)2 composite membranes by direct impregnation method , 2008 .

[161]  J. R. Jurado,et al.  Transport properties of fast proton conducting mesoporous silica xerogels , 2007 .

[162]  Anita J. Hill,et al.  Physical and electrochemical characterization of nanocomposite membranes of Nafion and functionalized silicon oxide , 2007 .

[163]  Xuejun Cui,et al.  Preliminary evaluation of sulfonated poly(ether ether ketone)/monoethanolamine/adipic acid composite membranes for direct methanol fuel cell applications , 2007 .

[164]  B. Améduri,et al.  Synthesis of Original para-Sulfonic Acid Aminoethylthioethylbenzenesulfonic by Telomerization, and Its Grafting onto Poly(VDF-co-HFP) Copolymers for Proton Exchange Membrane for Fuel Cell , 2009 .

[165]  S. Lue,et al.  Surface modification of perfluorosulfonic acid membranes with perfluoroheptane (C7F16)/argon plasma , 2007 .

[166]  Mitsuru Higa,et al.  Poly(vinyl alcohol)-based polymer electrolyte membranes for direct methanol fuel cells , 2010 .

[167]  H. Rhee,et al.  Phosphonic acid functionalized poly(dimethyl siloxane) membrane for high temperature proton exchange membrane fuel cells , 2009 .

[168]  Deborah J. Jones,et al.  Solution sulfonation of a novel polybenzimidazole: a proton electrolyte for fuel cell application , 2008 .

[169]  H. Munakata,et al.  3DOM Silica Composite Membrane Including Binary PAMPS–SPEES Polymer Electrolyte for DMFC , 2009 .

[170]  S. Licoccia,et al.  SPPSU-based hybrid proton conducting polymeric electrolytes for intermediate temperature PEMFCs , 2007 .

[171]  S. Holdcroft,et al.  The effect of spatial confinement of Nafion® in porous membranes on macroscopic properties of the membrane , 2008 .

[172]  Juin-Yih Lai,et al.  Increases in the proton conductivity and selectivity of proton exchange membranes for direct methanol fuel cells by formation of nanocomposites having proton conducting channels , 2009 .

[173]  B. Scrosati,et al.  Properties and fuel cell performance of a Nafion-based, sulfated zirconia-added, composite membrane , 2008 .

[174]  Jeong Hoon Kim,et al.  Sulfonated poly(fluorene-co-sulfone)ether membranes containing perfluorocyclobutane groups for fuel cell applications , 2008 .

[175]  E. Giannelis,et al.  Nafion/Clay Hybrids with a Network Structure , 2009 .

[176]  L. Pratt,et al.  Mechanism of Tetraalkylammonium Headgroup Degradation in Alkaline Fuel Cell Membranes , 2008 .

[177]  Hongwei Zhang,et al.  Modification research of sulfonated PEEK membranes used in DMFC , 2008 .

[178]  A. Durán,et al.  Hybrid Organic/Inorganic Sol-Gel Materials for Proton Conducting Membranes , 2004 .

[179]  Huamin Zhang,et al.  Hydrophilic treatment poly(tetrafluoroethylene) reinforced sulfonated poly(ether ether ketone) composite membrane for proton exchange membrane fuel cell application , 2009 .

[180]  Qin Xin,et al.  Pd electroless plated Nafion® membrane for high concentration DMFCs , 2005 .

[181]  M. Boaventura,et al.  Proton Conducting Membranes Based on Benzimidazole Sulfonic Acid Doped Sulfonated Poly(Oxadiazole–Triazole) Copolymer for Low Humidity Operation , 2008 .

[182]  T. Abe,et al.  Preparation of anion-exchange membrane by plasma polymerization and its use in alkaline fuel cells , 2008 .

[183]  Y. Tolmachev,et al.  Conductivity of highly sulfonated polyphenylene sulfide in the powder form as a function of temperature and humidity , 2010 .

[184]  T. Xu,et al.  Novel silica/poly(2,6-dimethyl-1,4-phenylene oxide) hybrid anion-exchange membranes for alkaline fuel cells: Effect of heat treatment , 2009 .

[185]  C. Ma,et al.  A novel composite membranes based on sulfonated montmorillonite modified Nafion® for DMFCs , 2007 .

[186]  Tae Wook Kim,et al.  Preparation and Characterization of Hybrid Hydrotalcite-Sulfonated Polyetheretherketone (SPEEK) Cation-Exchange Membranes , 2009 .

[187]  Pablo Cañizares,et al.  Improved polybenzimidazole films for H3PO4-doped PBI-based high temperature PEMFC , 2007 .

[188]  H. Kawakami,et al.  High Proton Conductive and Low Gas Permeable Sulfonated Graft Copolyimide Membrane , 2010 .

[189]  C. Iojoiu,et al.  Novel phosphonated poly(1,3,4-oxadiazole)s: Synthesis in ionic liquid and characterization , 2008 .

[190]  B. P. Tripathi,et al.  SPEEK-zirconium hydrogen phosphate composite membranes with low methanol permeability prepared by electro-migration and in situ precipitation. , 2007, Journal of colloid and interface science.

[191]  Evaluation of new conducting polymeric membrane based on sulfonation of compatibilized NR/EPDM blend , 2007 .

[192]  D. Yan,et al.  Synthesis and hydrolytic stability of soluble sulfonated polybenzoxazoles derived from bis(3-sulfonate-4-carboxyphenyl) sulfone , 2009 .

[193]  F. Fernández-Carretero,et al.  Hybrid ion-exchange membranes for fuel cells and separation processes , 2007 .

[194]  Y. Maekawa,et al.  Influence of grafting solvents on the properties of polymer electrolyte membranes prepared by γ-ray preirradiation method , 2008 .

[195]  Xiaoen Wang,et al.  Fabrication and characterization of improved PFSA/ePTFE composite polymer electrolyte membranes , 2007 .

[196]  Thomas J. Schmidt,et al.  Performance and Durability of Membrane Electrode Assemblies Based on Radiation‐Grafted FEP‐g‐Polystyrene Membranes , 2004 .

[197]  M. Guiver,et al.  Radiation-induced grafting of styrene onto ultra-high molecular weight polyethylene powder and subsequent film fabrication for application as polymer electrolyte membranes: I. Influence of grafting conditions , 2008 .

[198]  M. Uchida,et al.  Polymer Electrolyte Fuel Cell , 2013 .

[199]  Yilong Wang,et al.  Bulk graft modification of polyolefin membranes by combining pre-irradiation-induced graft and supercritical CO2-swelling polymerization , 2008 .

[200]  John P. Kopasz,et al.  The United States Department of Energy's high temperature, low relative humidity membrane program , 2007 .

[201]  Zhiqing Shi,et al.  Non-fluorinated proton-exchange membranes based on melt extruded SEBS/HDPE blends , 2008 .

[202]  A. Borriello,et al.  Control of morphology of sulfonated syndio‐polystyrene membranes through constraints imposed by siloxane networks , 2008 .

[203]  Yan Yin,et al.  Synthesis and characterization of sulfonated polyimides derived from 2,2′-bis(4-sulfophenyl)-4,4′-oxydianiline as polymer electrolyte membranes for fuel cell applications , 2009 .

[204]  M. Eikerling,et al.  Defect structure for proton transport in a triflic acid monohydrate solid , 2003 .

[205]  M. F. Öksüzömer,et al.  Preparation and characterization of sulfonated polyimide ionomers via post-sulfonation method for fuel cell applications , 2008 .

[206]  Xuejun Cui,et al.  Organic–inorganic hybrid proton exchange membranes based on silicon-containing polyacrylate nanoparticles with phosphotungstic acid , 2007 .

[207]  P. Mu,et al.  Fabrication and characterization of self-assembled Nafion–SiO2–ePTFE composite membrane of PEM fuel cell , 2008 .

[208]  H.-G. Haubold,et al.  Nano structure of NAFION: a SAXS study , 2001 .

[209]  W. Liang,et al.  Preparation, characterization, and properties of new crosslinked proton-conducting membranes with polyoxyalkylene moieties , 2008 .

[210]  Y. Aihara,et al.  Proton-conducting electrolyte membranes based on hyperbranched polymer with a sulfonic acid group for high-temperature fuel cells , 2010 .

[211]  Whangi Kim,et al.  Synthesis and characterization of sulfonated bromo-poly(2,6-dimethyl-1,4-phenylene oxide)-co-(2,6-diphenyl-1,4-phenylene oxide) copolymer as proton exchange membrane , 2010 .

[212]  Dawn M. Crawford,et al.  Thermogravimetric characterization of highly sulfonated poly(styrene–isobutylene–styrene) block copolymers: Effects of sulfonation and counter-ion substitution , 2007 .

[213]  Eunja Kim,et al.  Nanoscale building blocks for the development of novel proton exchange membrane fuel cells. , 2008, Journal of Physical Chemistry B.

[214]  Robert B. Moore,et al.  State of understanding of nafion. , 2004, Chemical reviews.

[215]  Chuh‐Yung Chen,et al.  Synthesis and properties of novel HMS-based sulfonated poly(arylene ether sulfone)/silica nano-composite membranes for DMFC applications , 2007 .

[216]  Y. Meng,et al.  Synthesis and characterization of poly(arylene ether ketone) with sulfonated fluorene pendants for proton exchange membrane , 2007 .

[217]  N. Kononenko,et al.  Perfluorinated nanocomposite membranes modified by polyaniline: Electrotransport phenomena and morphology , 2009 .

[218]  M. Z. Yates,et al.  Electric field processing to control the structure of poly(vinylidene fluoride) composite proton conducting membranes , 2009 .

[219]  Stephen J. Paddison,et al.  Device and materials modeling in PEM fuel cells , 2009 .

[220]  Jing Pan,et al.  Self-crosslinked alkaline polymer electrolyte exceptionally stable at 90 °C. , 2010, Chemical communications.

[221]  Yong-Gun Shul,et al.  Preparation of Pt/zeolite–Nafion composite membranes for self-humidifying polymer electrolyte fuel cells , 2007 .

[222]  A. Manthiram,et al.  ‘Click’-functionalization of poly(sulfone)s and a study of their utilities as proton conductive membranes in direct methanol fuel cells , 2010 .

[223]  A. Manthiram,et al.  Sulfonated poly(ether ether ketone) as an ionomer for direct methanol fuel cell electrodes , 2008 .

[224]  Tsutomu Ioroi,et al.  Direct ethanol fuel cells using an anion exchange membrane , 2008 .

[225]  Changpeng Liu,et al.  Surface-modified Nafion® membrane by casting proton-conducting polyelectrolyte complexes for direct methanol fuel cells , 2007 .

[226]  M. Marrony,et al.  Durability study and lifetime prediction of baseline proton exchange membrane fuel cell under severe operating conditions , 2008 .

[227]  K. Tadanaga,et al.  Structural change and proton conductivity of phosphosilicate gel–polyimide composite membrane for a fuel cell operated at 180 °C , 2008 .

[228]  E. Quartarone,et al.  PBI Composite and Nanocomposite Membranes for PEMFCs: The Role of the Filler , 2009 .

[229]  Swati Rao,et al.  Crosslinking of sulphonated poly (ether ether ketone) using aromatic bis(hydroxymethyl) compound , 2008 .

[230]  N. Kim,et al.  A new self-cross-linked, net-structured, proton conducting polymer membrane for high temperature proton exchange membrane fuel cells , 2010 .

[231]  B. Scrosati,et al.  Physical properties of proton conducting membranes based on a protic ionic liquid. , 2007, The journal of physical chemistry. B.

[232]  Yi-Huan Lee,et al.  Fabrication of novel proton exchange membranes for DMFC via UV curing , 2008 .

[233]  G. Schmidt-naake,et al.  Fe2+ Catalyzed Synthesis of Radiation Grafted Functional Membranes and Application in Fuel Cells and Ion Recovery , 2007 .

[234]  Kyungjung Kwon,et al.  Maximization of high-temperature proton exchange membrane fuel cell performance with the optimum distribution of phosphoric acid , 2009 .

[235]  Jaroslav Stejskal,et al.  Low methanol-permeable polyaniline/Nafion composite membrane for direct methanol fuel cells , 2009 .

[236]  S. Nam,et al.  Synchronous Crosslinking Imidized Polymer Electrolytes Having Fully Interpenetrating Polymer Networks (Full‐IPNs) Structure for Application in Membrane Fuel Cell , 2007 .

[237]  T. Zhao,et al.  Performance of alkaline electrolyte-membrane-based direct ethanol fuel cells , 2009 .

[238]  G. Goward,et al.  Influences of casting solvents on proton dynamics within sulfonated polyether ether ketones (S-PEEKs) studied using high-resolution solid-state NMR , 2008 .

[239]  Composite polymer electrolyte membranes containing polyrotaxanes , 2008 .

[240]  P. Kohl,et al.  Phosphorus-doped glass proton exchange membranes for low temperature direct methanol fuel cells , 2008 .

[241]  Yi-Ming Sun,et al.  Proton exchange membranes modified with sulfonated silica nanoparticles for direct methanol fuel cells , 2007 .

[242]  H. Yano,et al.  Durability of a novel sulfonated polyimide membrane in polymer electrolyte fuel cell operation , 2008 .

[243]  Dae-Soo Han,et al.  Synthesis of sulfonated aromatic poly(ether amide)s and their application to proton exchange membrane fuel cells , 2009 .

[244]  Hong Zhang,et al.  Novel sulfonated poly(ether ether ketone ketone)s for direct methanol fuel cells usage: Synthesis, water uptake, methanol diffusion coefficient and proton conductivity , 2009 .

[245]  A. Saccà,et al.  Composite S-PEEK membranes for medium temperature polymer electrolyte fuel cells , 2008 .

[246]  Enrico Negro,et al.  New inorganic–organic proton conducting membranes based on Nafion® and [(ZrO2)·(SiO2)0.67] nanoparticles: Synthesis vibrational studies and conductivity , 2008 .

[247]  Y. Maekawa,et al.  Polymer electrolyte hybrid membranes prepared by radiation grafting of p-styryltrimethoxysilane into poly(ethylene-co-tetrafluoroethylene) films , 2007 .

[248]  Y. Lee,et al.  Nafion® nanocomposite membranes: Effect of fluorosurfactants on hydrophobic silica nanoparticle dispersion and direct methanol fuel cell performance , 2009 .

[249]  K. Müllen,et al.  Proton mobilities in phosphonic acid-based proton exchange membranes probed by 1H and 2H solid-state NMR spectroscopy. , 2009, The journal of physical chemistry. B.

[250]  Pablo Cañizares,et al.  Performance of a Vapor-Fed Polybenzimidazole (PBI)-Based Direct Methanol Fuel Cell , 2008 .

[251]  Qingfeng Li,et al.  Cross-linked polybenzimidazole membranes for high temperature proton exchange membrane fuel cells with dichloromethyl phosphinic acid as a cross-linker , 2008 .

[252]  Wei Xing,et al.  Surface-modified Nafion membranes with mesoporous SiO2 layers via a facile dip-coating approach for direct methanol fuel cells , 2008 .

[253]  Claire Hartmann-Thompson,et al.  Proton‐conducting polyhedral oligosilsesquioxane nanoadditives for sulfonated polyphenylsulfone hydrogen fuel cell proton exchange membranes , 2008 .

[254]  P. Mu,et al.  Synthesis and performance of water‐retention PEMs with nafion‐intercalating‐montmorillonite hybrid , 2008 .

[255]  Mingyao Zhang,et al.  Physical and electrochemical behaviors of directly polymerized sulfonated poly(arylene ether ketone sulfone)s proton exchange membranes with different backbone structures , 2009 .

[256]  M. Arroyo,et al.  The Development of Proton Conducting Polymer Membranes for Fuel Cells Using Sulfonated Carbon Nanofibres , 2008 .

[257]  Huamin Zhang,et al.  Properties and fuel cell performance of proton exchange membranes prepared from disulfonated poly(sulfide sulfone) , 2008 .

[258]  James E. McGrath,et al.  Synthesis and characterization of sulfonated‐fluorinated, hydrophilic‐hydrophobic multiblock copolymers for proton exchange membranes , 2009 .

[259]  Yi Liu,et al.  Preparation and proton conductivity of composite membranes based on sulfonated poly(phenylene oxide) and benzimidazole , 2007 .

[260]  Y. Maekawa,et al.  Preparation of poly(ether ether ketone)-based polymer electrolytes for fuel cell membranes using grafting technique , 2008 .

[261]  D. Jung,et al.  Surface chemistry and physical properties of Nafion/polypyrrole/Pt composite membrane prepared by chemical in situ polymerization for DMFC , 2008 .

[262]  J. Caro,et al.  New proton conducting hybrid membranes for HT-PEMFC systems based on polysiloxanes and SO3H-functionalized mesoporous Si-MCM-41 particles , 2008 .

[263]  R. Slade,et al.  Investigations of conductivity in FEP-based radiation-grafted alkaline anion-exchange membranes , 2005 .

[264]  Hsiu-Li Lin,et al.  Preparation of PBI/PTFE composite membranes from PBI in N,N′-dimethyl acetamide solutions with various concentrations of LiCl , 2008 .

[265]  G. Robertson,et al.  Copoly(arylene ether)s containing pendant sulfonic acid groups as proton exchange membranes , 2009 .

[266]  G. Lindbergh,et al.  Evaluation of a sulfophenylated polysulfone membrane in a fuel cell at 60 to 110 °C , 2007 .

[267]  S. Picken,et al.  Spontaneous formation of hierarchical proton‐conductive structures in sulfonated poly(p‐phenylene terephthalamide) copolymer films , 2007 .

[268]  Qingfeng Li,et al.  Doping phosphoric acid in polybenzimidazole membranes for high temperature proton exchange membrane fuel cells , 2007 .

[269]  Z. Yue,et al.  Preparation of proton-conducting composite membranes from sulfonated poly(ether ether ketone) and polyacrylonitrile , 2007 .

[270]  Zhongwei Chen,et al.  A soluble and highly conductive ionomer for high-performance hydroxide exchange membrane fuel cells. , 2009, Angewandte Chemie.

[271]  Won-Yong Lee,et al.  A study on fabrication of sulfonated poly(ether ether ketone)-based membrane-electrode assemblies for polymer electrolyte membrane fuel cells , 2008 .

[272]  S. Roualdès,et al.  Preparation of solid alkaline fuel cell binders based on fluorinated poly(diallyldimethylammonium chloride)s [poly(DADMAC)] or poly(chlorotrifluoroethylene‐co‐DADMAC) copolymers , 2009 .

[273]  Q. Tran‐Cong‐Miyata,et al.  Studies on microscopic structure of sol-gel derived nanohybrids containing heteropolyacid , 2007 .

[274]  Preparation of organic/inorganic composite membranes using two types of polymer matrix via a sol–gel process , 2008 .

[275]  P. Shen,et al.  Anion exchange membrane fuel cells , 2005 .

[276]  S. Nunes,et al.  One-pot synthesis of high molecular weight sulfonated poly(oxadiazole–triazole) copolymers for proton conductive membranes , 2008 .

[277]  Nilhan Kayaman‐Apohan,et al.  Phosphorus‐Containing Sulfonated Polyimides for Proton Exchange Membranes , 2008 .

[278]  K. Góra-Marek,et al.  Spectroscopic investigations into degradation of polymer membranes for fuel cells applications. , 2008, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[279]  P. Costamagna,et al.  Percolative model of proton conductivity of Nafion ® membranes , 2008 .

[280]  Monica Pica,et al.  Novel Nafion–zirconium phosphate nanocomposite membranes with enhanced stability of proton conductivity at medium temperature and high relative humidity , 2007 .

[281]  K. Schmidt-Rohr,et al.  Determination of the Structure of a Novel Anion Exchange Fuel Cell Membrane by Solid-State Nuclear Magnetic Resonance Spectroscopy , 2009 .

[282]  S. Zaidi,et al.  Proton and methanol transport behavior of SPEEK/TPA/MCM-41 composite membranes for fuel cell application , 2008 .

[283]  P. Shen,et al.  Homogeneous synthesis of PFSI/silica composite membranes for PEMFC operating at low humidity , 2007 .

[284]  S. Hsu,et al.  Synthesis and properties of fluorine-containing polybenzimidazole/montmorillonite nanocomposite membranes for direct methanol fuel cell applications , 2007 .

[285]  A. D. Modestov,et al.  MEA for alkaline direct ethanol fuel cell with alkali doped PBI membrane and non-platinum electrodes , 2009 .

[286]  Hui Na,et al.  Modification of sulfonated poly(ether ether ketone) proton exchange membrane for reducing methanol crossover , 2008 .

[287]  Hyunjung Lee,et al.  Proton exchange membrane using partially sulfonated polystyrene-b-poly(dimethylsiloxane) for direct methanol fuel cell , 2008 .

[288]  A. Durán,et al.  Hybrid organic-inorganic nanostructured membranes for high temperature proton exchange membranes fuel cells (PEMFC) , 2006 .

[289]  Huamin Zhang,et al.  An inorganic/organic self-humidifying composite membranes for proton exchange membrane fuel cell application , 2008 .

[290]  Stephen J. Paddison,et al.  Short-side-chain proton conducting perfluorosulfonic acid ionomers: Why they perform better in PEM fuel cells , 2008 .

[291]  Hwayong Kim,et al.  Preparation of PVdF/PSSA composite membranes using supercritical carbon dioxide for direct methanol fuel cells , 2009 .

[292]  S. W. Yoon,et al.  Surface fluorinated poly(vinyl alcohol)/poly(styrene sulfonic acid-co-maleic acid) membrane for polymer electrolyte membrane fuel cells , 2009 .

[293]  M. J. Cánovas,et al.  Preparation and characterization of hybrid membranes for fuel cell applications: EPDM filled with organophilized silicas , 2009 .

[294]  Jing Pan,et al.  Alkaline polymer electrolyte fuel cells: Principle, challenges, and recent progress , 2010 .

[295]  A. K. Banthia,et al.  Synthesis and characterization of polyvinyl alcohol copolymer/phosphomolybdic acid-based crosslinked composite polymer electrolyte membranes , 2008 .

[296]  C. Bonnebat,et al.  Formation and characterization of crosslinked membranes for alkaline fuel cells , 2009 .

[297]  J. Filippi,et al.  Selective oxidation of ethanol to acetic acid in highly efficient polymer electrolyte membrane-direct ethanol fuel cells , 2009 .

[298]  Jinhuan Li,et al.  Synthesis and characterization of sulfonated poly(benzoxazole ether ketone)s by direct copolymerization as novel polymers for proton‐exchange membranes , 2007 .

[299]  Won Choon Choi,et al.  Modification of proton conducting membrane for reducing methanol crossover in a direct-methanol fuel cell , 2001 .

[300]  R. Kannan,et al.  Domain size manipulation of perflouorinated polymer electrolytes by sulfonic acid-functionalized MWCNTs to enhance fuel cell performance. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[301]  T. Uma,et al.  A Novel Glass Membrane for Low Temperature H2/O2 Fuel Cell Electrolytes , 2007 .

[302]  Jie Yin,et al.  Synthesis of novel sulfonated polybenzimidazole and preparation of cross-linked membranes for fuel cell application , 2007 .

[303]  M. Kulkarni,et al.  Polybenzimidazoles tethered with N-phenyl 1,2,4-triazole units as polymer electrolytes for fuel cells , 2009 .

[304]  J. Kallitsis,et al.  New High Temperature Polymer Electrolyte Membranes. Influence of the Chemical Structure on their Properties , 2008 .

[305]  W. Sakamoto,et al.  Synthesis of proton-conductive sol–gel membranes from trimethoxysilylmethylstyrene and phenylvinylphosphonic acid , 2007 .

[306]  Jingtao Wang,et al.  Surface-modified Y zeolite-filled chitosan membrane for direct methanol fuel cell , 2007 .

[307]  H. Hwang,et al.  Preparation of sulfonated SEBS block copolymer membranes and their permeation properties , 2008 .

[308]  J. Lawrence,et al.  The degradation mechanism of sulfonated poly(arylene ether sulfone)s in an oxidative environment , 2008 .

[309]  Y. Shu,et al.  Sulfonated poly(ether imide) and poly(ether sulfone) blends for direct methanol fuel cells. II. Membrane preparation and performance , 2008 .

[310]  Y. Maekawa,et al.  Chemically Stable Hybrid Polymer Electrolyte Membranes Prepared by Radiation Grafting, Sulfonation, and Silane-Crosslinking Techniques , 2008 .

[311]  B. Gupta,et al.  Preparation of ion exchange membranes by radiation grafting of acrylic acid on FEP films , 2008 .

[312]  B. Min,et al.  Composite polymer electrolyte membranes comprising triblock copolymer and heteropolyacid for fuel cell applications , 2008 .

[313]  Sung Hyun Kim,et al.  Methanol crossover through PtRu/Nafion composite membrane for a direct methanol fuel cell , 2007 .

[314]  L. Hong,et al.  In situ implantation of PolyPOSS blocks in Nafion® matrix to promote its performance in direct methanol fuel cell , 2008 .

[315]  P. Jannasch,et al.  Proton‐Conducting Aromatic Polymers Carrying Hypersulfonated Side Chains for Fuel Cell Applications , 2007 .

[316]  B. Schnyder,et al.  Surface modification of radiation‐grafted polymer films and membranes by crosslinking , 2007 .

[317]  G. Robertson,et al.  Comb-Shaped Poly(arylene ether sulfone)s as Proton Exchange Membranes† , 2008 .

[318]  E. Sgreccia,et al.  Synthetic strategies for the preparation of proton-conducting hybrid polymers based on PEEK and PPSU for PEM fuel cells , 2008 .

[319]  Jong‐Chan Lee,et al.  High-temperature fuel cell membranes based on mechanically stable para-ordered polybenzimidazole prepared by direct casting , 2007 .

[320]  T. Yamaguchi,et al.  Rapid proton conduction through unfreezable and bound water in a wholly aromatic pore-filling electrolyte membrane. , 2009, The journal of physical chemistry. B.

[321]  Chuh‐Yung Chen,et al.  Nafion®/nitrated sulfonated poly(ether ether ketone) membranes for direct methanol fuel cells , 2009 .

[322]  Microstructured proton-conducting membranes by synchrotron-radiation-induced grafting , 2008 .

[323]  M. Nogami,et al.  Properties of PWA/ZrO2-doped phosphosilicate glass composite membranes for low-temperature H2/O2 fuel cell applications , 2008 .

[324]  A. Kornyshev,et al.  Mechanisms of Proton Conductance in Polymer Electrolyte Membranes , 2001 .

[325]  Jong‐Chan Lee,et al.  Synthesis and properties of poly(aryl ether benzimidazole) copolymers for high-temperature fuel cell membranes , 2008 .

[326]  K. Okamoto,et al.  Synthesis and Properties of Sulfonated Poly(siloxane imide)s Bearing Dimethyl Siloxane Oligomers for Fuel Cell Applications , 2009 .

[327]  M. Dupuis,et al.  Atomistic simulation of nafion membrane. 2. Dynamics of water molecules and hydronium ions. , 2007, The journal of physical chemistry. B.

[328]  Deborah J. Jones,et al.  Advances in the Development of Inorganic-Organic Membranes for Fuel Cell Applications , 2008 .

[329]  Keith Scott,et al.  Polymer electrolyte membrane fuel cells: Principles and advances , 2004 .

[330]  Xuejun Cui,et al.  Crosslinked SPEEK/AMPS blend membranes with high proton conductivity and low methanol diffusion coefficient for DMFC applications , 2007 .

[331]  Liliana A. Diaz,et al.  Water and phosphoric acid uptake of poly [2,5-benzimidazole] (ABPBI) membranes prepared by low and high temperature casting , 2009 .

[332]  W. Xing,et al.  Blends based on sulfonated poly[bis(benzimidazobenzisoquinolinones)] and poly(vinylidene fluoride) for polymer electrolyte membrane fuel cell , 2009 .

[333]  S. Chan,et al.  Composite Nafion® membrane embedded with hybrid nanofillers for promoting direct methanol fuel cell performance , 2008 .

[334]  K. Bouzek,et al.  Hybrid inorganic-organic proton conducting membranes for fuel cells and gas sensors , 2007 .

[335]  Ji Young Kim,et al.  Poly(1-vinylimidazole)/Pd-impregnated Nafion for direct methanol fuel cell applications , 2008 .

[336]  A. Kornyshev,et al.  Enhancing Proton Mobility in Polymer Electrolyte Membranes: Lessons from Molecular Dynamics Simulations , 2002 .

[337]  M. Islam,et al.  Variation in acid moiety of polybenzimidazoles: Investigation of physico-chemical properties towards their applicability as proton exchange and gas separation membrane materials , 2009 .

[338]  Moon-Sung Kang,et al.  Anhydrous solid proton conductors based on perfluorosulfonic ionomer with polymeric solvent for polymer electrolyte fuel cell , 2009 .

[339]  S. Paddison,et al.  Effect of Molecular Weight on Hydrated Morphologies of the Short-Side-Chain Perfluorosulfonic Acid Membrane , 2009 .

[340]  K. Nahm,et al.  Structural characterization of PVdF-HFP/PEG/Al2O3 proton conducting membranes for fuel cells , 2007 .

[341]  H. Na,et al.  Novel sulfonated poly(ether ether ketone) with pendant benzimidazole groups as a proton exchange membrane for direct methanol fuel cells , 2009 .

[342]  Baoyi Wang,et al.  Sorbitol-plasticized chitosan/zeolite hybrid membrane for direct methanol fuel cell , 2007 .

[343]  M. Fayer,et al.  Water dynamics and proton transfer in nafion fuel cell membranes. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[344]  V. Shahi,et al.  Phosphonic acid grafted bis(4-γ-aminopropyldiethoxysilylphenyl)sulfone (APDSPS)-poly(vinyl alcohol) cross-linked polyelectrolyte membrane impervious to methanol , 2008 .

[345]  A. Ismail,et al.  Characterization and performance of proton exchange membranes for direct methanol fuel cell: Blending of sulfonated poly(ether ether ketone) with charged surface modifying macromolecule , 2008 .

[346]  G. He,et al.  Preparation and characteristics of crosslinked sulfonated poly(phthalazinone ether sulfone ketone) with poly(vinyl alcohol) for proton exchange membrane , 2008 .

[347]  A. Saccà,et al.  Investigation on composite S-PEEK/H-BETA MEAs for medium temperature PEFC , 2008 .

[348]  A. Manthiram,et al.  N,N'-Bis-(1H-benzimidazol-2-yl)-isophthalamide as an additive in sulfonated polymer membranes for direct methanol fuel cells , 2008 .

[349]  Y. Maekawa,et al.  Anisotropic proton-conducting membranes prepared from swift heavy ion-beam irradiated ETFE films , 2007 .

[350]  Tomoya Higashihara,et al.  Locally sulfonated poly(ether sulfone)s with highly sulfonated units as proton exchange membrane , 2009 .

[351]  M. Tuominen,et al.  Intrinsically proton conducting polymers and copolymers containing benzimidazole moieties: Glass transition effects , 2007 .

[352]  T. Lim,et al.  Synthesis and characterization of cross-linked poly (ether sulfone) for a fuel cell membrane , 2007 .

[353]  S. Licoccia,et al.  Proton Conducting Hybrid Membranes Based on Aromatic Polymers Blends for Direct Methanol Fuel Cell Applications , 2009 .

[354]  T. Zhao,et al.  Pd and Pd-Cu Alloy Deposited Nafion Membranes for Reduction of Methanol Crossover in Direct Methanol Fuel Cells , 2005 .

[355]  Yushan Yan,et al.  Nanocomposite fuel cell membranes based on Nafion and acid functionalized zeolite beta nanocrystals , 2008 .

[356]  Enrico Negro,et al.  Hybrid inorganic–organic proton conducting membranes based on Nafion and 5 wt% of MxOy (M = Ti, Zr, Hf, Ta and W). Part II: Relaxation phenomena and conductivity mechanism , 2009 .

[357]  A. Kornyshev,et al.  Proton-Conducting Polymer Electrolyte Membranes: Water and Structure in Charge , 2008 .

[358]  G. Żukowska,et al.  Pyridine‐based PBI Composite Membranes for PEMFCs , 2009 .

[359]  M. Sumita,et al.  Proton conduction in Nafion composite membranes filled with mesoporous silica , 2007 .

[360]  D. Yan,et al.  Sulfonated poly(arylene thioether phosphine oxide)s copolymers for proton exchange membrane fuel cells , 2008 .

[361]  Jürgen Mergel,et al.  Durability of ABPBI‐based MEAs for High Temperature PEMFCs at Different Operating Conditions , 2008 .

[362]  Nanwen Li,et al.  Synthesis of sulfonated poly(arylene-co-naphthalimide)s as novel polymers for proton exchange membranes , 2008 .

[364]  Y. Shul,et al.  Formation and evaluation of semi-IPN of nafion 117 membrane for direct methanol fuel cell: 1. Crosslinked sulfonated polystyrene in the pores of nafion 117 , 2007 .

[365]  Shih-Wei Chuang,et al.  Synthesis and properties of fluorine-containing polybenzimidazole/silica nanocomposite membranes for proton exchange membrane fuel cells , 2007 .

[366]  M. Marrony,et al.  Phosphotungstic Acid Supported on a Nanopowdered ZrO2 as a Filler in Nafion‐Based Membranes for Polymer Electrolyte Fuel Cells , 2008 .

[367]  K. Okamoto,et al.  Synthesis and properties of novel side-chain-type sulfonated polyimides , 2009 .

[368]  M. Nasef,et al.  Structure-property Relationships in Radiation Grafted Poly(tetrafluoroethylene)-graft-polystyrene Sulfonic Acid Membranes , 2005 .

[369]  Changpeng Liu,et al.  Chitosan/heteropolyacid composite membranes for direct methanol fuel cell , 2009 .

[370]  V. Antonucci,et al.  Polymer electrolytes based on sulfonated polysulfone for direct methanol fuel cells , 2008 .

[371]  Won-Yong Lee,et al.  Performance of solid alkaline fuel cells employing anion-exchange membranes , 2008 .

[372]  H. Pu,et al.  Transparent and anhydrous proton conductors based on PVA/imidazole/NH4H2PO4 composites , 2007 .

[373]  T. Yazawa,et al.  Solid electrolyte membranes based on polyvinyl phosphonic acid and alkoxysilane for intermediate-temperature fuel cells , 2008 .

[374]  K. Miyatake,et al.  Poly(arylene ether) ionomers containing sulfofluorenyl groups : Effect of electron-withdrawing groups on the properties , 2008 .

[375]  R. Dittmeyer,et al.  Formation and characterization of PEDOT-modified Nafion 117 membranes , 2006 .

[376]  Hae-Seung Lee,et al.  Synthesis and characterization of poly(arylene ether sulfone)-b-polybenzimidazole copolymers for high temperature low humidity proton exchange membrane fuel cells , 2008 .

[377]  Ahmad Fauzi Ismail,et al.  Physicochemical study of poly(ether ether ketone) electrolyte membranes sulfonated with mixtures of fuming sulfuric acid and sulfuric acid for direct methanol fuel cell application , 2007 .

[378]  Dan Wu,et al.  Hybrid acid-base polymer membranes prepared for application in fuel cells , 2009 .

[379]  S. Y. Chen,et al.  Effect of morphological properties of ionic liquid-templated mesoporous anatase TiO2 on performance of PEMFC with Nafion/TiO2 composite membrane at elevated temperature and low relative humidity , 2007 .

[380]  San Ping Jiang,et al.  Self-assembled Nafion–silica nanoparticles for elevated-high temperature polymer electrolyte membrane fuel cells , 2007 .

[381]  Mitsuru Higa,et al.  Synthesis and properties of sulfonated multiblock copolynaphthalimides , 2009 .

[382]  B. Scrosati,et al.  Proton-conducting membranes based on protic ionic liquids , 2008 .

[383]  H. Ha,et al.  Effects of organo-functionalization and sulfonation of MCM-41on the proton selectivities of MCM-41/Nafion composite membranes for DMFC , 2008 .

[384]  W. Jo,et al.  Preparation of new proton exchange membrane based on self-assembly of Poly(styrene-co-styrene sulfonic acid)-b-poly(methyl methacrylate)/Poly(vinylidene fluoride) blend , 2009 .

[385]  M. R. Tarasevich,et al.  Ethanol crossover through alkali-doped polybenzimidazole membrane , 2009 .

[386]  Xin Wang,et al.  Fabrication of the porous polyimide film as a matrix of the composite membrane of the direct methanol fuel cell , 2009 .

[387]  Mohammad Mahdi Hasani-Sadrabadi,et al.  Nafion ® /bio-functionalized montmorillonite nanohybrids as novel polyelectrolyte membranes for direct methanol fuel cells , 2009 .

[388]  Y. Oono,et al.  Influence of the phosphoric acid-doping level in a polybenzimidazole membrane on the cell performance of high-temperature proton exchange membrane fuel cells , 2009 .

[389]  K. Scott,et al.  A novel composite Nafion membrane for direct alcohol fuel cells , 2009 .

[390]  Douglas Henderson,et al.  Ionic soft matter : modern trends in theory and applications , 2005 .

[391]  Tien Hoa Nguyen,et al.  Pore-filling membrane for direct methanol fuel cells based on sulfonated poly(styrene-ran-ethylene) and porous polyimide matrix , 2009 .

[392]  Zhenhua Jiang,et al.  Synthesis and characterization of sulfonated poly(arylene ether)s with sulfoalkyl pendant groups for proton exchange membranes , 2008 .

[393]  Silvia Licoccia,et al.  Sulfonated polyether ether ketone and hydrated tin oxide proton conducting composites for direct methanol fuel cell applications , 2008 .

[394]  K. Miyatake,et al.  Synthesis and properties of sulfonated block copolymers having fluorenyl groups for fuel-cell applications. , 2009, ACS applied materials & interfaces.

[395]  B. Yi,et al.  MWCNTs reinforced Nafion® membrane prepared by a novel solution-cast method for PEMFC , 2008 .

[396]  H. Na,et al.  Novel sulfonated poly(arylene ether ketone) copolymers bearing carboxylic or benzimidazole pendant groups for proton exchange membranes , 2009 .

[397]  Chi-Hung Lee,et al.  Synthesis and characterization of epoxy‐based semi‐interpenetrating polymer networks sulfonated polyimides proton‐exchange membranes for direct methanol fuel cell applications , 2008 .

[398]  M. Fayer,et al.  Water Dynamics in Nafion Fuel Cell Membranes: the Effects of Confinement and Structural Changes on the Hydrogen Bond Network. , 2007, The journal of physical chemistry. C, Nanomaterials and interfaces.

[399]  Hidetoshi Matsumoto,et al.  Polyelectrolyte membranes based on hydrocarbon polymer containing fullerene , 2008 .

[400]  T. Lim,et al.  Sulfonated poly(ether sulfone)‐based catalyst binder for a proton‐exchange membrane fuel cell , 2009 .

[401]  Seung Woo Lee,et al.  Synthesis of a cation-exchange fabric with sulfonate groups by radiation-induced graft copolymerization from binary monomer mixtures , 2008 .

[402]  S. Çelik,et al.  Preparation and the proton conductivity of chitosan/poly(vinyl phosphonic acid) complex polymer electrolytes , 2008 .

[403]  Chong Zhang,et al.  A new and facile approach for the preparation of cross-linked sulfonated poly(sulfide sulfone) membranes for fuel cell application , 2007 .

[404]  S. Holmes,et al.  Functionalized zeolite A-nafion composite membranes for direct methanol fuel cells , 2007 .

[405]  Yongming Zhang,et al.  Preparation of polysiloxane modified perfluorosulfonic acid composite membranes assisted by supercritical carbon dioxide for direct methanol fuel cell , 2009 .

[406]  Zhenhua Jiang,et al.  Novel Wholly Aromatic Sulfonated Poly(arylene ether) Copolymers Containing Sulfonic Acid Groups on the Pendants for Proton Exchange Membrane Materials , 2007 .

[407]  A. S. Hay,et al.  Synthesis and properties of novel benzimidazole‐containing sulfonated polyethersulfones for fuel cell applications , 2009 .

[408]  A. M. Rocco,et al.  Poly(styrene-co-acrylonitrile) based proton conductive membranes , 2008 .

[409]  A. Ferlauto,et al.  Thermal properties of Nafion–TiO2 composite electrolytes for PEM fuel cell , 2009 .

[410]  M. Xiao,et al.  Fabrication and properties of cross-linked sulfonated fluorene-containing poly(arylene ether ketone) for proton exchange membrane , 2007 .

[411]  Mitra Yoonessi,et al.  Nanostructure and properties of sulfonated polyarylenethioethersulfone copolymers as proton exchange fuel cell membranes , 2007 .

[412]  X. Jian,et al.  Synthesis and properties of novel sulfonated polyimides containing phthalazinone moieties for PEMFC , 2008 .

[413]  Xiaofeng Xie,et al.  Synthesis and characterization of crosslinked sulfonated poly(arylene ether sulfone) membranes for DMFC applications , 2009 .

[414]  Chun–Chen Yang,et al.  Preparation of the acidic PVA/MMT nanocomposite polymer membrane for the direct methanol fuel cell (DMFC) , 2009 .

[415]  Bryan S. Pivovar,et al.  Proton exchange membrane for DMFC and H2/air fuel cells: Synthesis and characterization of partially fluorinated disulfonated poly(arylene ether benzonitrile) copolymers , 2007 .

[416]  D. Yan,et al.  Synthesis and properties of sulfonated poly(arylene ether phosphine oxide)s for proton exchange membranes , 2009 .

[417]  Improvement of Membrane and Membrane Electrode Assembly Durability , 2009 .

[418]  Tamar L Greaves,et al.  Protic ionic liquids: properties and applications. , 2008, Chemical reviews.

[419]  W. V. Steele,et al.  A molecular dynamics study of a nafion polyelectrolyte membrane and the aqueous phase structure for proton transport. , 2007, The journal of physical chemistry. B.

[420]  B. Pivovar,et al.  The Chemical and Structural Nature of Proton Exchange Membrane Fuel Cell Properties , 2005 .

[421]  J. Ramı́rez-Salgado.  Study of basic biopolymer as proton membrane for fuel cell systems , 2007 .

[422]  T. Yamaguchi,et al.  Low methanol crossover and high performance of DMFCs achieved with a pore-filling polymer electrolyte membrane , 2007 .

[423]  P. Kohl,et al.  Anionic polysulfone ionomers and membranes containing fluorenyl groups for anionic fuel cells , 2009 .

[424]  S. Ji,et al.  High DMFC performance output using modified acid–base polymer blend , 2008 .

[425]  H. Ha,et al.  Zirconium meta-sulfonphenyl phosphonic acid-incorporated Nafion® membranes for reduction of methanol permeability , 2008 .

[426]  D. Seung,et al.  Exfoliated Sulfonated Poly(arylene ether sulfone)–Clay Nanocomposites , 2008 .

[427]  M. Hein,et al.  Preparation and characterisation of sulfonated partially fluorinated statistical poly(arylene ether sulfone)s and their blends with PBI , 2007 .

[428]  Zhang Gaowen,et al.  Organic/inorganic composite membranes for application in DMFC , 2005 .

[429]  Nur Hidayati Othman,et al.  Sulfonated polyether ether ketone composite membrane using tungstosilicic acid supported on silica–aluminium oxide for direct methanol fuel cell (DMFC) , 2009 .

[430]  G. Barra,et al.  Poly (ether ether ketone) derivatives: Synthetic route and characterization of nitrated and sulfonated polymers , 2009 .

[431]  Changpeng Liu,et al.  Sulfonated poly(arylene-co-naphthalimide)s synthesized by copolymerization of primarily sulfonated monomer and fluorinated naphthalimide dichlorides as novel polymers for proton exchange membranes , 2006 .

[432]  M. Hickner,et al.  Investigation of membrane electrode assembly (MEA) processing parameters on performance for wholly aromatic hydrocarbon-based proton exchange membranes , 2009 .

[433]  S. Kwak,et al.  Nafion/sulfated β-cyclodextrin composite membranes for direct methanol fuel cells , 2008 .

[434]  Jang-Woo Lee,et al.  High performance membrane-electrode assembly based on a surface-modified membrane , 2007 .

[435]  Jamie P. Kizewski,et al.  Novel electrolyte membranes and non-Pt catalysts for low temperature fuel cells , 2010 .

[436]  Huamin Zhang,et al.  Fabrication and characterization of a PTFE-reinforced integral composite membrane for self-humidifying PEMFC , 2007 .

[437]  S. Paddison,et al.  Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology. , 2004, Chemical reviews.

[438]  A. Wokaun,et al.  Novel ETFE based radiation grafted poly(styrene sulfonic acid-co-methacrylonitrile) proton conducting membranes with increased stability , 2009 .

[439]  Angelo Basile,et al.  Thermo and electrochemical characterization of sulfonated PEEK–WC membranes and Krytox-Si-Nafion® composite membranes , 2009 .

[440]  Young Taik Hong,et al.  Selective and quantitative sulfonation of poly(arylene ether ketone)s containing pendant phenyl rings by chlorosulfonic acid , 2008 .

[441]  A. Kumar,et al.  Modification of sulfonated poly(ether ether ketone) with phenolic resin , 2007 .

[442]  X. Jian,et al.  Synthesis and properties of sulfonated poly(phthalazinone ether nitrile ketone)/boron phosphate composite membranes for PEMFC , 2008 .

[443]  Cy H. Fujimoto,et al.  Transport Properties of Hydroxide and Proton Conducting Membranes , 2008 .

[444]  Jingtao Wang,et al.  Effect of zeolites on chitosan/zeolite hybrid membranes for direct methanol fuel cell , 2008 .

[445]  Liang Wu,et al.  Improving anion exchange membranes for DMAFCs by inter-crosslinking CPPO/BPPO blends , 2008 .

[446]  M. Pina,et al.  Zeolites and zeotype materials as efficient barriers for methanol cross-over in DMFCs , 2008 .

[447]  Y. Ein‐Eli,et al.  Acid‐Functionalized Mesostructured Aluminosilica for Hydrophilic Proton Conduction Membranes , 2007 .

[448]  R. He,et al.  A copolymer of poly[2,2′-(m-phenylene)-5,5′- bibenzimidazole] and poly(2,5-benzimidazole) for high-temperature proton-conducting membranes , 2010 .

[449]  H. Kanesaka,et al.  Synthesis and characterization of postsulfonated poly(arylene ether sulfone) diblock copolymers for proton exchange membranes , 2009 .

[450]  Y. Shu,et al.  Sulfonated poly(ether imide) and poly(ether sulfone) blends for direct methanol fuel cells. I. Sulfonation of PEI and characterization of the products , 2008 .

[451]  Dan Wu,et al.  Preparation and characterization of CPPO/BPPO blend membranes for potential application in alkaline direct methanol fuel cell , 2008 .

[452]  Jong‐Chan Lee,et al.  Copolymers of Poly(2,5‐benzimidazole) and Poly[2,2′‐(p‐phenylene)‐5,5′‐bibenzimidazole] for High‐Temperature Fuel Cell Applications , 2008 .

[453]  Z. Laušević,et al.  On the use of gamma irradiation crosslinked PVA membranes in hydrogen fuel cells , 2007 .

[454]  W. Sakamoto,et al.  Proton-conductive sol–gel membranes from phenylvinylphosphonic acid and organoalkoxysilanes with different functionalities , 2008 .

[455]  T. Zhao,et al.  A palladium-alloy deposited Nafion membrane for direct methanol fuel cells , 2003 .

[456]  Zhongyi Jiang,et al.  Proton conducting CS/P(AA-AMPS) membrane with reduced methanol permeability for DMFCs , 2008 .

[457]  S. Licoccia,et al.  Hybrid materials for polymer electrolyte membrane fuel cells: Water uptake, mechanical and transport properties , 2007 .

[458]  Moon Jeong Park,et al.  Control of Domain Orientation in Block Copolymer Electrolyte Membranes at the Interface with Humid Air , 2009 .

[459]  Fusheng Pan,et al.  Proton conducting membranes prepared by incorporation of organophosphorus acids into alcohol barrier polymers for direct methanol fuel cells , 2008 .

[460]  A. Wokaun,et al.  Thermal Properties of Proton-Conducting Radiation-Grafted Membranes , 2008 .

[461]  R. Hagiwara,et al.  Novel composite electrolyte membranes consisting of fluorohydrogenate ionic liquid and polymers for the unhumidified intermediate temperature fuel cell , 2007 .

[462]  S. Jiang,et al.  Self-Assembled Pt/Mesoporous Silica−Carbon Electrocatalysts for Elevated-Temperature Polymer Electrolyte Membrane Fuel Cells , 2008 .

[463]  Paul A. Kohl,et al.  Hybrid Anion and Proton Exchange Membrane Fuel Cells , 2009 .

[464]  M. Hickner,et al.  Alternative polymer systems for proton exchange membranes (PEMs). , 2004, Chemical reviews.

[465]  Y. Maekawa,et al.  Suitability of some fluoropolymers used as base films for preparation of polymer electrolyte fuel cell membranes , 2006 .

[466]  K. Miyatake,et al.  Effect of the Hydrophobic Component on the Properties of Sulfonated Poly(arylene ether sulfone)s , 2009 .

[467]  Hong Li,et al.  Preparation of polysiloxane/perfluorosulfonic acid nanocomposite membranes in supercritical carbon dioxide system for direct methanol fuel cell , 2009 .

[468]  R. Marschall,et al.  Proton conductivity of imidazole functionalized ordered mesoporous silica: Influence of type of anchorage, chain length and humidity , 2009 .

[469]  B. Yi,et al.  Characteristics of polyethersulfone/sulfonated polyimide blend membrane for proton exchange membrane fuel cell. , 2008, The journal of physical chemistry. B.

[470]  Q. Liu,et al.  Quaternized cardo polyetherketone anion exchange membrane for direct methanol alkaline fuel cells , 2009 .

[471]  Y. Meng,et al.  Synthesis and Characterization of Phthalazinone Containing Poly(arylene ether)s, Poly(arylene thioether)s, and Poly(arylene sulfone)s via a Novel N−C Coupling Reaction , 2004 .

[472]  Sulfonated poly(arylene ether sulfone) ionomers containing fluorenyl groups for fuel cell applications , 2008 .

[473]  M. Nogami,et al.  Synthesis and characterization of mixed TiO2/ZrO2glass composite membranes , 2007 .

[474]  Nanwen Li,et al.  Novel proton exchange membranes based on water resistant sulfonated poly(bis(benzimidazobenzisoquinolinones)) , 2009 .

[475]  A. Kornyshev,et al.  Proton transfer in a single pore of a polymer electrolyte membrane , 2001 .

[476]  S. Moon,et al.  Sulfonated polystyrene/polyvinyl chloride composite membranes for PEMFC applications , 2008 .

[477]  B. Min,et al.  Composite polymer electrolyte membranes comprising P(VDF‐co‐CTFE)‐g‐PSSA graft copolymer and zeolite for fuel cell applications , 2009 .

[478]  Hyung Kyu Kim,et al.  Polymer blend membranes of sulfonated poly(arylene ether ketone) for direct methanol fuel cell , 2008 .

[479]  Jianli Wang,et al.  Synthesis and characterization of sulphonated polymer derived from 6FDA-ODA polyimide , 2005 .

[480]  A. Wokaun,et al.  Radiation grafted fuel cell membranes based on co-grafting of α-methylstyrene and methacrylonitrile into a fluoropolymer base film , 2009 .

[481]  P. Shen,et al.  Nafion/polyaniline composite membranes specifically designed to allow proton exchange membrane fuel cells operation at low humidity , 2009 .

[482]  H. Na,et al.  A novel sulfonated poly(ether ether ketone) and cross-linked membranes for fuel cells , 2010 .

[483]  K. Nahm,et al.  Characterization of PVdF-HFP/Nafion/AlO[OH]n composite membranes for direct methanol fuel cell (DMFC) , 2008 .

[484]  J. Ferraris,et al.  Proton-conducting membranes based on HTFSI-doped PEI/SiO2 nanocomposites , 2008 .

[485]  J. Douglas Way,et al.  The effects of thermal annealing on commercial Nafion® membranes☆ , 2007 .

[486]  V. Ramani,et al.  Effect of cathode binder IEC on kinetic and transport losses in all-SPEEK MEAs , 2008 .

[487]  Silvia Licoccia,et al.  A Simple New Route to Covalent Organic/Inorganic Hybrid Proton Exchange Polymeric Membranes , 2006 .

[488]  Jong Hak Kim,et al.  Synthesis and characterization of crosslinked triblock copolymers for fuel cells , 2008 .

[489]  L. Carvalho,et al.  Nanostructured membranes based on sulfonated poly(aryl ether sulfone) and silica for fuel‐cell applications , 2008 .

[490]  D. Wan,et al.  Synthesis and anhydrous proton conductivity of poly(5-vinyltetrazole) prepared by free radical polymerization , 2008 .

[491]  Jiujun Zhang,et al.  Preparation and performance of nano silica/Nafion composite membrane for proton exchange membrane fuel cells , 2008 .

[492]  M. F. Öksüzömer,et al.  Preparation of sulfonated copolyimides containing aliphatic linkages as proton‐exchange membranes for fuel cell applications , 2008 .

[493]  M. Lavorgna,et al.  Hybridization of Nafion membranes by the infusion of functionalized siloxane precursors , 2007 .

[494]  B. Yi,et al.  Cs2.5H0.5PWO40/SiO2 as addition self-humidifying composite membrane for proton exchange membrane fuel cells , 2007 .

[495]  K. Tasaki,et al.  Fabrication and characterization of fullerene–Nafion composite membranes , 2007 .

[496]  R. He,et al.  Preparation and characterization of new anhydrous, conducting membranes based on composites of ionic liquid trifluoroacetic propylamine and polymers of sulfonated poly (ether ether) ketone or polyvinylidenefluoride , 2008 .

[497]  S. Nunes,et al.  Sulfonated polynaphthalimides with benzimidazole pendant groups , 2008 .

[498]  T. Terai,et al.  Water transport properties of crosslinked-PTFE based electrolyte membranes , 2008 .

[499]  Jong‐Chan Lee,et al.  Proton-Conducting Zirconium Pyrophosphate/Poly(2,5-benzimidazole) Composite Membranes Prepared by a PPA Direct Casting Method , 2007 .

[500]  M. Guiver,et al.  Comparative effect of phthalazinone units in sulfonated poly(arylene ether ether ketone ketone) copolymers as proton exchange membrane materials , 2008 .

[501]  Jong Hak Kim,et al.  Anhydrous proton conducting membranes based on crosslinked graft copolymer electrolytes , 2008 .

[502]  Ana Paula Mousinho,et al.  Deposition of polymeric perfluored thin films in proton ionic membranes by plasma processes , 2007 .

[503]  A. Trivisonno,et al.  Direct methanol fuel cell operation with pre-stretched recast Nafion® , 2008 .

[504]  Yong Yang,et al.  A novel inorganic/organic composite membrane tailored by various organic silane coupling agents for use in direct methanol fuel cells , 2009 .

[505]  V. Noto,et al.  Hybrid inorganic-organic proton conducting membranes based on Nafion and 5 wt% of MxOy (M = Ti, Zr, Hf, Ta and W): part I, synthesis, properties and vibrational studies , 2007 .

[506]  R. Wycisk,et al.  Polyphosphazene Membranes for Fuel Cells , 2008 .

[507]  M. Pan,et al.  Nafion–zirconia nanocomposite membranes formed via in situ sol–gel process , 2010 .

[508]  Y. Maekawa,et al.  Double crosslinked polyetheretherketone-based polymer electrolyte membranes prepared by radiation and thermal crosslinking techniques , 2007 .

[509]  M. Shaw,et al.  Structured polymer electrolyte blends based on sulfonated polyetherketoneketone (SPEKK) and a poly (ether imide) (PEI) , 2008 .

[510]  F. Büchi,et al.  Polymer electrolyte fuel cell durability , 2009 .

[511]  Nora Gourdoupi,et al.  New proton conducting polymer blends and their fuel cell performance , 2010 .

[512]  João G. Crespo,et al.  Swelling of polymeric membranes in room temperature ionic liquids , 2007 .

[513]  Ling Huang,et al.  Long-term performance of polyetheretherketone-based polymer electrolyte membrane in fuel cells at 95 °C , 2009 .

[514]  B. Gupta,et al.  Radiation Grafted Membranes , 2008 .

[515]  A. Zhu,et al.  Performance of organic-inorganic hybrid anion-exchange membranes for alkaline direct methanol fuel cells , 2009 .

[516]  S. Nunes,et al.  Development of polyoxadiazole nanocomposites for high temperature polymer electrolyte membrane fuel cells , 2008 .

[517]  Chien-Kung Lin,et al.  Preparation of nitrated sulfonated poly(ether ether ketone) membranes for reducing methanol permeability in direct methanol fuel cell applications , 2009 .

[518]  Michael H. Santare,et al.  Mechanical properties of a reinforced composite polymer electrolyte membrane and its simulated performance in PEM fuel cells , 2008 .

[519]  Manuel Maréchal,et al.  Solvation of sulphonic acid groups in Nafion® membranes from accurate conductivity measurements , 2007 .

[520]  A. S. Hay,et al.  Ionomers for Proton Exchange Membrane Fuel Cells with Sulfonic Acid Groups on the End Groups: Novel Linear Aromatic Poly(sulfide−ketone)s , 2008 .

[521]  W. Xing,et al.  Sulfonated polyimides bearing benzimidazole groups for proton exchange membranes , 2007 .

[522]  A. A. Kornyshev,et al.  Fine Morphology of Proton-Conducting Ionomers , 2004 .

[523]  B. Scrosati,et al.  Acid–gel-immobilized, nanoporous composite, protonic membranes as low cost system for Direct Methanol Fuel Cells , 2007 .

[524]  S. Çelik,et al.  Preparation and proton conductivity of acid-doped 5-aminotetrazole functional poly(glycidyl methacrylate) , 2008 .

[525]  K. Tadanaga,et al.  Inorganic-organic hybrid membranes prepared from 3-aminopropyltriethoxysilane and sulfuric acid as anhydrous proton conductors , 2007 .

[526]  S. Chirachanchai,et al.  Sulfonated montmorillonite/sulfonated poly(ether ether ketone) (SMMT/SPEEK) nanocomposite membrane for direct methanol fuel cells (DMFCs) , 2008 .

[527]  M. Nogami,et al.  Performance of H2/O2 fuel cell using membrane electrolyte of phosphotungstic acid-modified 3-glycidoxypropyl-trimethoxysilanes , 2008 .

[528]  Hongtan Liu,et al.  The effects of excess phosphoric acid in a Polybenzimidazole-based high temperature proton exchange membrane fuel cell , 2010 .

[529]  Pei Kang Shen,et al.  Dynamic conducting effect of WO3/PFSA membranes on the performance of proton exchange membrane fuel cells , 2008 .

[530]  Lin Zhuang,et al.  Alkaline polymer electrolyte fuel cells completely free from noble metal catalysts , 2008, Proceedings of the National Academy of Sciences.

[531]  X. Jian,et al.  Preparation and characterization of chloromethylated/quanternized poly (phthalazinone ether sulfone) anion exchange membrane , 2009 .

[532]  H. Na,et al.  SPEEK/epoxy resin composite membranes in situ polymerization for direct methanol fell cell usages , 2007 .

[533]  Otoo Yamada,et al.  Direct methanol fuel cell performance of sulfonated polyimide membranes , 2009 .

[534]  W. Lamanna,et al.  Membranes based on basic polymers and perfluorinated acids for hotter and drier fuel cell operating conditions , 2007 .

[535]  K. Müllen,et al.  Functionalized poly(benzimidazole)s as membrane materials for fuel cells , 2007 .

[536]  Hiroyuki Uchida,et al.  Durability of Sulfonated Polyimide Membrane Evaluated by Long-Term Polymer Electrolyte Fuel Cell Operation , 2006 .

[537]  S. Holdcroft,et al.  Novel Organic−Inorganic Hybrids with Increased Water Retention for Elevated Temperature Proton Exchange Membrane Application , 2008 .

[538]  Xianfeng Li,et al.  Sulfonated poly(arylene ether ketone)s prepared by direct copolymerization as proton exchange membranes: Synthesis and comparative investigation on transport properties , 2008 .

[539]  Huanting Wang,et al.  Weak-base anion exchange membranes by amination of chlorinated polypropylene with polyethyleneimine at low temperatures , 2008 .

[540]  S. Holdcroft,et al.  Transport properties of composite membranes containing silicon dioxide and Nafion , 2008 .

[541]  Zhenhua Jiang,et al.  Low Water Swelling and High Proton Conducting Sulfonated Poly(arylene ether) with Pendant Sulfoalkyl Groups for Proton Exchange Membranes , 2007 .

[542]  G. Schmidt-naake,et al.  Proton Conducting Membranes Obtained by Doping Radiation-Grafted Basic Membrane Matrices with Phosphoric Acid , 2007 .

[543]  I. Kim,et al.  Blend membranes of Nafion/sulfonated poly(aryl ether ketone) for direct methanol fuel cell , 2007 .

[544]  M. Pina,et al.  Conductivity in zeolite-polymer composite membranes for PEMFCs , 2007 .

[545]  S. Licoccia,et al.  Organic–inorganic hybrid membranes based on sulfonated polyaryl–ether–ketones: Correlation between water uptake and electrical conductivity , 2008 .

[546]  B. Blümich,et al.  Proton exchange in hybrid sulfonated poly(ether ether ketone)–silica membranes by 1H solid-state NMR , 2008 .

[547]  S. Licoccia,et al.  Mechanical properties of hybrid proton conducting polymer blends based on sulfonated polyetheretherketones , 2008 .

[548]  E. Giannelis,et al.  Nafion–clay nanocomposite membranes: Morphology and properties , 2009 .

[549]  M. Nogami,et al.  Heteropolyacid in glass electrolytes for the development of H2/O2 fuel cells , 2007 .

[550]  H. Na,et al.  Sulfonated poly(ether ether ketone)/clay-SO3H hybrid proton exchange membranes for direct methanol fuel cells , 2008 .

[551]  J. J. Iruin,et al.  Proton-conducting membranes from phosphotungstic acid-doped sulfonated polyimide for direct methanol fuel cell applications , 2009 .

[552]  A. Marigo,et al.  A new polyfunctional acid material for solid state proton conductivity in dry environment: Nafion doped with difluoromethandiphosphonic acid , 2010 .

[553]  A. Ismail,et al.  The effect of blending sulfonated poly(ether ether ketone) with various charged surface modifying macromolecules on proton exchange membrane performance , 2009 .

[554]  Matthias Wessling,et al.  Nafion®/H-ZSM-5 composite membranes with superior performance for direct methanol fuel cells , 2009 .

[555]  Thomas L. Kalapos,et al.  Thermal studies of the state of water in proton conducting fuel cell membranes , 2007 .

[556]  Darren J. Martin,et al.  Nafion-MPMDMS nanocomposite membranes with low methanol permeability , 2007 .

[557]  Jong Hak Kim,et al.  Proton-conducting composite membranes from graft copolymer electrolytes and phosphotungstic acid for fuel cells , 2009 .

[558]  Hsiu-Li Lin,et al.  A Method for Improving Ionic Conductivity of Nafion Membranes and its Application to PEMFC , 2007 .

[559]  James L. Horan,et al.  Copolymerization of divinylsilyl-11-silicotungstic acid with butyl acrylate and hexanediol diacrylate: synthesis of a highly proton-conductive membrane for fuel-cell applications. , 2009, ChemSusChem.

[560]  H. Na,et al.  Sulfonated poly(ether ether ketone)/epoxy/phenol novolac blend proton‐exchange membranes with low methanol permeability , 2009 .

[561]  Won-Yong Lee,et al.  Non-aqueous polymer electrolytes containing room temperature ionic liquid : 2,3 -dimethyl-1 -octylimidazolium tetrafluoroborate , 2007 .

[562]  Q. Xin,et al.  Alkali doped polybenzimidazole membrane for alkaline direct methanol fuel cell , 2008 .

[563]  Y. Kang,et al.  Characterization of deoxyribonucleic acid/poly(ethylene oxide) proton-conducting membranes , 2008 .

[564]  B. Hwang,et al.  Sorption and transport properties of the semi-interpenetrating network based on crosslinked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride) as proton-conducting membranes , 2009 .

[565]  Kyungjung Kwon,et al.  Performance enhancement of phosphoric acid-based proton exchange membrane fuel cells by using ammonium trifluoromethanesulfonate , 2009 .

[566]  D. Driscoll,et al.  Investigations into the ex situ methanol, ethanol and ethylene glycol permeabilities of alkaline polymer electrolyte membranes , 2007 .

[567]  D. Stamatialis,et al.  Impregnated membranes for direct methanol fuel cells at high methanol concentrations , 2009 .

[568]  B. Min,et al.  Preparation and characterization of proton conducting polysulfone grafted poly(styrene sulfonic acid) polyelectrolyte membranes , 2009 .

[569]  H. Na,et al.  Sulfonated poly(ether ether ketone)/aminopropyltriethoxysilane/phosphotungstic acid hybrid membranes with non-covalent bond: Characterization, thermal stability, and proton conductivity , 2008 .

[570]  Liping Zhu,et al.  Tethering hydrophilic polymer brushes onto PPESK membranes via surface-initiated atom transfer radical polymerization , 2008 .

[571]  Synthesis and characterization of sodalite–polyimide nanocomposite membranes , 2009 .

[572]  Monica Pica,et al.  Nafion–Zirconium Phosphate Nanocomposite Membranes with High Filler Loadings: Conductivity and Mechanical Properties , 2008 .

[573]  Robert C T Slade,et al.  Steady-state dc and impedance investigations of H2/O2 alkaline membrane fuel cells with commercial Pt/C, Ag/C, and Au/C cathodes. , 2006, The journal of physical chemistry. B.

[574]  D. Seung,et al.  Preparation of Nafion-sulfonated clay nanocomposite membrane for direct menthol fuel cells via a film coating process , 2007 .

[575]  H. Allcock.  Recent developments in polyphosphazene materials science , 2006 .

[576]  Triazole and triazole derivatives as proton transport facilitators in polymer electrolyte membrane fuel cells , 2009 .

[577]  Dennis W. Smith,et al.  Synthesis and characterization of high molecular weight perfluorocyclobutyl-containing polybenzimidazoles (PFCB–PBI) for high temperature polymer electrolyte membrane fuel cells , 2009 .

[578]  Bruno Scrosati,et al.  New types of Brönsted acid-base ionic liquids-based membranes for applications in PEMFCs. , 2007, Chemphyschem : a European journal of chemical physics and physical chemistry.

[579]  E. Higuchi,et al.  Distribution profile of water and suppression of methanol crossover in sulfonated polyimide electrolyte membrane for direct methanol fuel cells , 2007 .

[580]  M. M. Hasani-Sadrabadi,et al.  Preparation and characterization of nanocomposite membranes made of poly(2,6-dimethyl-1,4-phenylene oxide) and montmorillonite for direct methanol fuel cells , 2008 .

[581]  L. Hong,et al.  Effects of polyaniline chain structures on proton conduction in a PEM host matrix , 2008 .

[582]  Qin Xin,et al.  Zirconium phosphate/Nafion115 composite membrane for high-concentration DMFC , 2008 .

[583]  H. Kita,et al.  Synthesis and properties of sulfonated polyimides from homologous sulfonated diamines bearing bis(aminophenoxyphenyl)sulfone , 2007 .

[584]  Meng Yang,et al.  Alternatively chitosan sulfate blending membrane as methanol-blocking polymer electrolyte membrane for direct methanol fuel cell , 2009 .

[585]  A. Morin,et al.  Advanced Mesostructured Hybrid Silica−Nafion Membranes for High-Performance PEM Fuel Cell , 2008 .

[586]  Yongming Zhang,et al.  Chemical modification of Nafion membrane with 3,4-ethylenedioxythiophene for direct methanol fuel cell application , 2008 .

[587]  Xiaobo Ji,et al.  Proton hopping in phosphoric acid solvated nafion membrane: a molecular simulation study. , 2007, The journal of physical chemistry. B.

[588]  C. Cho,et al.  Fuel cell membranes based on blends of PPO with poly(styrene-b-vinylbenzylphosphonic acid) copolymers , 2008 .

[589]  Robert F. Savinell,et al.  High temperature proton exchange membranes based on polybenzimidazoles for fuel cells , 2009 .

[590]  P. Kohl,et al.  Crosslinked, epoxy-based anion conductive membranes for alkaline membrane fuel cells , 2010 .

[591]  S. Nunes,et al.  Protonation of Sulfonated Poly(4,4′‐diphenylether‐1,3,4‐oxadiazole) Membranes , 2007 .

[592]  F. Jiang,et al.  A new anhydrous proton conductor based on polybenzimidazole and tridecyl phosphate , 2008 .

[593]  C. Detrembleur,et al.  Beneficial effect of carbon nanotubes on the performances of Nafion membranes in fuel cell applications , 2007 .

[594]  Ying‐Ling Liu,et al.  Preparation and properties of nanocomposite membranes of polybenzimidazole/sulfonated silica nanoparticles for proton exchange membranes , 2009 .

[595]  J. Way,et al.  The relationship between proton conductivity and water permeability in composite carboxylate/sulfonate perfluorinated ionomer membranes , 2007 .

[596]  Timothy J. Peckham,et al.  Structural and Morphological Features of Acid-Bearing Polymers for PEM Fuel Cells , 2008 .

[597]  Peter Lund,et al.  Stability of radicals in electron-irradiated fluoropolymer film for the preparation of graft copolymer fuel cell electrolyte membranes , 2010 .

[598]  C. S. Kim,et al.  Polymer Electrolyte Membranes Based on Room Temperature Ionic Liquid: 2,3-Dimethyl-1-octyl imidazolium hexafluorophosphate (DMOImPF6) , 2007 .

[599]  Jianhong Liu,et al.  Development and characterization of sulfonated poly(ether sulfone) for proton exchange membrane materials , 2007 .

[600]  Y. Lee,et al.  Sulfonated polyimide membranes grafted with sulfoalkylated side chains for proton exchange membrane fuel cell (PEMFC) applications , 2008 .

[601]  K. Scott,et al.  A polymer electrolyte membrane for high temperature fuel cells to fit vehicle applications , 2010 .

[602]  G. Scherer.  Fuel Cells II , 2008 .

[603]  Masaru Yoshida,et al.  Improvement of chemical stability of polymer electrolyte fuel cell membranes by grafting of new substituted styrene monomers into ETFE films , 2006 .

[604]  Hongwei Zhang,et al.  Alkaline Polymer Electrolyte Membranes from Quaternized Poly(phthalazinone ether ketone) for Direct Methanol Fuel Cell , 2008 .

[605]  M. M. Hasani-Sadrabadi,et al.  Novel high-performance nanocomposite proton exchange membranes based on poly (ether sulfone) , 2010 .

[606]  Dan Wu,et al.  A novel proton-conductive membrane with reduced methanol permeability prepared from bromomethylated poly(2,6-dimethyl-1,4 -phenylene oxide) (BPPO) , 2008 .

[607]  J. Mcgrath,et al.  Hydrophilic–hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low-temperature coupling reactions for proton exchange membrane fuel cells , 2008 .

[608]  Hsiu-Li Lin,et al.  Nafion/PTFE and zirconium phosphate modified Nafion/PTFE composite membranes for direct methanol fuel cells , 2008 .

[609]  Jong Hak Kim,et al.  Proton conducting poly(vinylidene fluoride-co-chlorotrifluoroethylene) graft copolymer electrolyte membranes , 2008 .

[610]  J. Lee,et al.  Proton conducting membranes based on sulfonated poly(ether ether ketone)/TiO2 nanocomposites for a direct methanol fuel cell , 2007 .

[611]  Dukjoon Kim,et al.  Comparison of homogeneously and heterogeneously sulfonated polyetheretherketone membranes in preparation, properties and cell performance , 2008 .

[612]  Jung-Ki Park,et al.  Blend membranes based on sulfonated poly(ether ether ketone) and poly(vinylidene fluoride) for high performance direct methanol fuel cell , 2007 .

[613]  M. Z. Yates,et al.  Tailoring the structure of S-PEEK/PDMS proton conductive membranes through applied electric fields , 2008 .

[614]  Martin Hein,et al.  Partially Fluorinated Aarylene Polyethers and their Ternary Blends with PBI and H3PO4. Part II. Characterisation and Fuel Cell Tests of the Ternary Membranes , 2008 .

[615]  C. Tomasi,et al.  Relationships between microstructure and transport properties of proton-conducting porous PVDF membranes , 2007 .

[616]  Jen-Ming Yang,et al.  Direct methanol fuel cell (DMFC) based on PVA/MMT composite polymer membranes , 2009 .

[617]  J. Kerres,et al.  Novel multiblock‐co‐ionomers as potential polymer electrolyte membrane materials , 2007 .

[618]  X. Jian,et al.  Synthesis and properties of novel H-bonded composite membranes from sulfonated poly(phthalazinone ether)s for PEMFC , 2008 .

[619]  A. Rusanov,et al.  Proton-Conducting Polymers and Membranes Carrying Phosphonic Acid Groups , 2008 .

[620]  Changpeng Liu,et al.  Polyelectrolyte complexes of chitosan and phosphotungstic acid as proton-conducting membranes for direct methanol fuel cells , 2007 .

[621]  Synthesis and characterization of homogeneously sulfonated poly(ether ether ketone) membranes: Effect of casting solvent , 2008 .

[622]  Yu Zhang,et al.  Fabrication and investigation of SiO2 supported sulfated zirconia/Nafion® self-humidifying membrane for proton exchange membrane fuel cell applications , 2008 .

[623]  In‐situ Crosslinked Polymer Electrolyte Membranes from Thermally Reactive Oligomers for Direct Methanol Fuel Cells , 2007 .

[624]  W. Xing,et al.  Synthesis and properties of water stable poly[bis(benzimidazobenzisoquinolinone)] ionomers for proton exchange membranes fuel cells , 2009 .

[625]  M. Washio,et al.  Synthesis and characterization of PEFC membranes based on fluorinated-polymer-alloy using pre-soft-EB grafting method , 2007 .

[626]  E. Peled,et al.  Novel proton-exchange membrane based on single-step preparation of functionalized ceramic powder containing surface-anchored sulfonic acid , 2008 .

[627]  S. Jiang,et al.  Highly durable proton exchange membranes for low temperature fuel cells. , 2007, The journal of physical chemistry. B.

[628]  Jong Hak Kim,et al.  Proton conducting membranes based on poly(vinyl chloride) graft copolymer electrolytes , 2008 .

[629]  Shudong Lin,et al.  Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities , 2008 .

[630]  Otoo Yamada,et al.  Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance , 2006 .

[631]  Yuxin Wang,et al.  Proton-Exchange Sulfonated Poly (ether ether ketone) (SPEEK)/SiOx-S Composite Membranes in Direct Methanol Fuel Cells , 2009 .

[632]  J. Wootthikanokkhan,et al.  Methanol Permeability and Proton Conductivity of Direct Methanol Fuel Cell Membranes Based on Sulfonated Poly(vinyl alcohol)-Layered Silicate Nanocomposites , 2008 .

[633]  H. Struchtrup,et al.  Thermodynamic considerations on the stability of water in Nafion , 2007 .

[634]  M. Nogami,et al.  Development of new glass composite membranes and their properties for low temperature H2/O2 fuel cells. , 2007, Chemphyschem : a European journal of chemical physics and physical chemistry.

[635]  Steve Greenbaum,et al.  New membranes based on ionic liquids for PEM fuel cells at elevated temperatures , 2008 .

[636]  G. Qian,et al.  Synthesis and characterization of high molecular weight hexafluoroisopropylidene‐containing polybenzimidazole for high‐temperature polymer electrolyte membrane fuel cells , 2009 .

[637]  T. Berning,et al.  Polymer electrolyte fuel cells based on phosphoric acid doped polybenzimidazole (PBI) membranes , 2007 .

[638]  J. L. Acosta,et al.  Kinetic study of the sulfonation of hydrogenated styrene butadiene block copolymer (HSBS): Microstructural and electrical characterizations , 2007 .

[639]  M. F. Öksüzömer,et al.  Synthesis and characterization of sulfonated homo‐ and co‐polyimides based on 2,4 and 2,5‐diaminobenzenesulfonic acid for proton exchange membranes , 2008 .

[640]  Hong Li,et al.  Perfluorosulfonic acid membranes treated by supercritical carbon dioxide method for direct methanol fuel cell application , 2009 .

[641]  Changpeng Liu,et al.  Water resistant sulfonated polyimides based on 4,4'-binaphthyl-1,1',8,8'-tetracarboxylic dianhydride (BNTDA) for proton exchange membranes , 2007 .

[642]  M. Shaw,et al.  Magnetic ion-exchange nanoparticles and their application in proton exchange membranes , 2007 .

[643]  T. Yasuda,et al.  Substituents effect on the properties of sulfonated polyimide copolymers , 2008 .

[644]  Nanwen Li,et al.  Synthesis and Properties of Sulfonated Poly[bis(benzimidazobenzisoquinolinones)] as Hydrolytically and Thermooxidatively Stable Proton Conducting Ionomers , 2008 .

[645]  B. Yi,et al.  Sulfonated polyimide/PTFE reinforced membrane for PEMFCs , 2007 .

[646]  H. Kita,et al.  Synthesis and properties of novel sulfonated polyimides bearing sulfophenyl pendant groups for polymer electrolyte fuel cell application , 2007 .

[647]  Y. Lee,et al.  Improvement of electrochemical performances of sulfonated poly(arylene ether sulfone) via incorporation of sulfonated poly(arylene ether benzimidazole) , 2008 .

[648]  M. Dupuis,et al.  Atomistic simulations of hydrated nafion and temperature effects on hydronium ion mobility. , 2007, The journal of physical chemistry. B.

[649]  D. Yan,et al.  Synthesis and properties of soluble sulfonated polybenzimidazoles from 3,3′-disulfonate-4,4′-dicarboxylbiphenyl as proton exchange membranes , 2009 .

[650]  Hongwei Zhang,et al.  Polymer electrolyte membranes derived from modified poly(phthalazinone ether ketone) for fuel cell applications , 2008 .

[651]  Serdar Erkan,et al.  Preparation and characterization of sulfonated polysulfone/titanium dioxide composite membranes for proton exchange membrane fuel cells , 2009 .

[652]  A. Weber,et al.  Modeling transport in polymer-electrolyte fuel cells. , 2004, Chemical reviews.

[653]  I. Hristov,et al.  Molecular modeling of proton transport in the short-side-chain perfluorosulfonic acid ionomer. , 2008, The journal of physical chemistry. B.

[654]  J. Wootthikanokkhan,et al.  Proton conductivity and methanol permeability of sulfonated poly(vinyl alcohol) membranes modified by using sulfoacetic acid and poly(acrylic acid) , 2007 .

[655]  D. Stamatialis,et al.  Dimensionally stable Nafion-polyethylene composite membranes for direct methanol fuel cell applications , 2008 .

[656]  Patrick T. Mather,et al.  Nanofiber Network Ion-Exchange Membranes , 2008 .

[657]  Y. Aihara,et al.  Anhydrous proton-conducting electrolyte membranes based on hyperbranched polymer with phosphonic acid groups for high-temperature fuel cells , 2008 .

[658]  S. Pitchumani,et al.  Co‐assembly of a Nafion–Mesoporous Zirconium Phosphate Composite Membrane for PEM Fuel Cells , 2009 .

[659]  P. Kamat,et al.  Proton activity in nafion films: probing exchangeable protons with methylene blue. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[660]  D. Yan,et al.  Comparison of the water uptake and swelling between sulfonated poly(phthalazinone ether ketone ketone)s and sulfonated poly(arylene ether ketone ketone)s , 2005 .

[661]  B. Min,et al.  Sulfonated poly(arylene ether sulfone) membranes based on biphenol for direct methanol fuel cells , 2008 .

[662]  S. Moon,et al.  Asymmetric polymer electrolyte membranes for water management of fuel cells , 2010 .

[663]  Hyuk Chang,et al.  Nafion based organic/inorganic composite membrane for air-breathing direct methanol fuel cells , 2007 .

[664]  H. Keul,et al.  Sulfonated poly( ether ether ketone)-silica membranes doped with phosphotungstic acid. Morphology and proton conductivity , 2009 .

[665]  M. Laguna,et al.  Permselectivity and conductivity of membranes based on sulfonated naphthalenic copolyimides. , 2007, The journal of physical chemistry. B.

[666]  Chun–Chen Yang,et al.  Electrochemical performance of an air-breathing direct methanol fuel cell using poly(vinyl alcohol)/hydroxyapatite composite polymer membrane , 2008 .

[667]  Timothy J. Peckham,et al.  Structure-property relationships for a series of polyimide copolymers with sulfonated pendant groups , 2008 .

[668]  K. Miyatake,et al.  Synthesis and Properties of Polyimide Ionomers Containing 1H-1,2,4-Triazole Groups , 2008 .

[669]  T. Lim,et al.  Operation of a proton exchange membrane fuel cell under non-humidified conditions using a membrane–electrode assemblies with composite membrane and electrode , 2007 .

[670]  O. Diat,et al.  Study of the casting of sulfonated polyimide ionomer membranes: structural evolution and influence on transport properties. , 2005, Journal of Physical Chemistry B.

[671]  B. P. Tripathi,et al.  Highly stable proton conducting nanocomposite polymer electrolyte membrane (PEM) prepared by pore modifications: An extremely low methanol permeable PEM , 2009 .

[672]  High proton conductive advanced hybrid membrane based on sulfonated Si-SBA-15 , 2009 .

[673]  Jie Yin,et al.  Preparation and Properties of Cross‐linked Sulphonated Poly(sulphide sulphone) Membranes for Fuel Cell Applications , 2009 .

[674]  Jianhong Liu,et al.  Crosslinked sulfonated poly (bis-A)-sulfones as proton exchange membrane for PEM fuel cell application , 2010 .

[675]  S. Moon,et al.  Covalent organic/inorganic hybrid proton-conductive membrane with semi-interpenetrating polymer network: Preparation and characterizations , 2008 .

[676]  Haksoo Han,et al.  The stability of semi-interpenetrating polymer networks based on sulfonated polyimide and poly(ethylene glycol) diacrylate for fuel cell applications , 2008 .

[677]  T. Hayakawa,et al.  Hyperbranched-linear poly(ether sulfone) blend films for proton exchange membranes , 2008 .

[678]  J. D. Costa,et al.  Characterization of hybrid organic and inorganic functionalised membranes for proton conduction , 2008 .

[679]  Yushan Yan,et al.  Quaternary phosphonium-based polymers as hydroxide exchange membranes. , 2010, ChemSusChem.

[680]  Gab-Jin Hwang,et al.  Covalently cross-linked sulfonated poly(ether ether ketone)/tungstophosphoric acid composite membranes for water electrolysis application , 2008 .

[681]  E. Quartarone,et al.  Polybenzimidazole‐Based Membranes as a Real Alternative to Nafion for Fuel Cells Operating at Low Temperature , 2008 .

[682]  S. Paddison,et al.  The phenomena of dielectric saturation in the water domains of polymer electrolyte membranes , 2004 .

[683]  Chun-Chen Yang,et al.  Preparation of the PVA/HAP composite polymer membrane for alkaline DMFC application , 2008 .

[684]  Arunachala Mada Kannan,et al.  Proton-conducting membranes with high selectivity from cross-linked poly(vinyl alcohol) and poly(vinyl pyrrolidone) for direct methanol fuel cell applications , 2009 .

[685]  Unal Sen,et al.  Anhydrous proton conducting membranes for PEM fuel cells based on Nafion/Azole composites , 2008 .

[686]  Xianfeng Li,et al.  Composite membranes based on highly sulfonated PEEK and PBI : Morphology characteristics and performance , 2008 .

[688]  K. Scott,et al.  Performance of a direct methanol alkaline membrane fuel cell , 2008 .

[689]  W. Ho,et al.  New sulfonated polybenzimidazole (SPBI) copolymer-based proton-exchange membranes for fuel cells , 2009 .

[690]  Li Qingfeng,et al.  Phosphoric acid doped polybenzimidazole membranes: Physiochemical characterization and fuel cell applications , 2001 .

[691]  M. Othman,et al.  Proton conducting composite membrane from sulfonated poly(ether ether ketone) and boron orthophosphate for direct methanol fuel cell application , 2007 .

[692]  W. Sakamoto,et al.  Synthesis of organosiloxane-based inorganic/organic hybrid membranes with chemically bound phosphonic acid for proton-conductors , 2007 .

[693]  G. Gebel,et al.  Structural evolution of water swollen perfluorosulfonated ionomers from dry membrane to solution , 2000 .

[694]  Jae Wook Lee,et al.  Preparation of Nafion/sulfonated poly(phenylsilsesquioxane) nanocomposite as high temperature proton exchange membranes , 2008 .

[695]  S. Holdcroft,et al.  Considerations of macromolecular structure in the design of proton conducting polymer membranes: graft versus diblock polyelectrolytes. , 2007, Journal of the American Chemical Society.

[696]  Brian C. Benicewicz,et al.  Durability Studies of PBI‐based High Temperature PEMFCs , 2008 .

[697]  Jong Hak Kim,et al.  Single-step synthesis of proton conducting poly(vinylidene fluoride) (PVDF) graft copolymer electrolytes , 2008 .

[698]  B. Scrosati,et al.  A study on the state of PWA in PVDF-based proton conducting membranes by Raman Spectroscopy (Accepted-In Press) , 2007 .

[699]  D. Wan,et al.  Anhydrous proton conductivity of acid doped vinyltriazole-based polymers , 2007 .

[700]  P. Hammond,et al.  Highly Conductive, Methanol Resistant Polyelectrolyte Multilayers , 2008 .

[701]  Arumugam Manthiram,et al.  Nafion-impregnated electrospun polyvinylidene fluoride composite membranes for direct methanol fuel cells , 2008 .

[702]  Tao Yang.  Poly(vinyl alcohol)/sulfated β-cyclodextrin for direct methanol fuel cell applications , 2009 .

[703]  Blends of Aromatic Polyethers Bearing Polar Pyridine Units and Their Evaluation as High Temperature Polymer Electrolytes , 2009 .

[704]  Xianfeng Li,et al.  Synthesis and characterization of a series of SPEEK/TiO2 hybrid membranes for direct methanol fuel cell , 2008 .

[705]  J. Lee,et al.  Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applications , 2008 .

[706]  Hsiu-Li Lin,et al.  Sol–gel derived sulfonated-silica/Nafion® composite membrane for direct methanol fuel cell , 2007 .

[707]  T. Lim,et al.  Dependence of the performance of a high-temperature polymer electrolyte fuel cell on phosphoric acid-doped polybenzimidazole ionomer content in cathode catalyst layer , 2007 .

[708]  S. Satija,et al.  Multilamellar Interface Structures in Nafion , 2009 .

[709]  S. Chirachanchai,et al.  Investigation of the role of benzimidazole-based model compounds on thermal stability and anhydrous proton conductivity of sulfonated poly(ether ether ketone) , 2009 .

[710]  Dukjoon Kim,et al.  SAXS and NMR analysis for the cast solvent effect on sPEEK membrane properties. , 2009, The journal of physical chemistry. B.

[711]  S. Greenbaum,et al.  Water and proton transport properties of hexafluorinated sulfonated poly(arylenethioethersulfone) copolymers for applications to proton exchange membrane fuel cells , 2007 .

[712]  M. Nogami,et al.  PMA/ZrO2―P2O5―SiO2 glass composite membranes: H2/O2 fuel cells , 2009 .

[713]  H. Na,et al.  Preparation and properties of UV irradiation-induced crosslinked sulfonated poly(ether ether ketone) proton exchange membranes , 2009 .

[714]  Y. Maekawa,et al.  Fuel cell performance of polyetheretherketone-based polymer electrolyte membranes prepared by a two-step grafting method , 2008 .

[715]  M. Xiao,et al.  Sulfonated poly(fluorenyl ether ketone nitrile) electrolyte membrane with high proton conductivity and low water uptake , 2010 .

[716]  S. H. Kim,et al.  ZrO2–SiO2/Nafion® composite membrane for polymer electrolyte membrane fuel cells operation at high temperature and low humidity , 2008 .

[717]  C. Ma,et al.  Sulfonated poly(propylene oxide) oligomers/Nafion® acid-base blend membranes for DMFC , 2007 .

[718]  Alessandro Lenci,et al.  SPEEK-TiO2 nanocomposite hybrid proton conductive membranes via in situ mixed sol–gel process , 2007 .

[719]  James L. Horan,et al.  Studies of heteropoly acid/polyvinylidenedifluoride–hexafluoroproylene composite membranes and implication for the use of heteropoly acids as the proton conducting component in a fuel cell membrane , 2007 .

[720]  M. Durstock,et al.  Proton exchange membranes based on sulfonated polyarylenethioethersulfone and sulfonated polybenzimidazole for fuel cell applications , 2007 .

[721]  S. Nunes,et al.  Fluorinated polyoxadiazole for high-temperature polymer electrolyte membrane fuel cells , 2008 .

[722]  M. Casciola,et al.  Preparation, Proton Conductivity and Mechanical Properties of Nafion 117–Zirconium Phosphate Sulphophenylphosphonate Composite Membranes , 2009 .

[723]  G. Goerigk,et al.  Analysis of proton-conducting organic–inorganic hybrid materials based on sulphonated poly(ether ether ketone) and phosphotungstic acid via ASAXS and WAXS , 2009 .

[724]  C. Larchet,et al.  The influence of absorbed methanol on the swelling and conductivity properties of cation-exchange membranes , 2008 .

[725]  Ronghuan He,et al.  Alkali doped polybenzimidazole membrane for high performance alkaline direct ethanol fuel cell , 2008 .

[726]  D. Seung,et al.  Functionalized carbon nanotube-poly(arylene sulfone) composite membranes for direct methanol fuel cells with enhanced performance , 2008 .

[727]  L. Hong,et al.  PPO-based acid–base polymer blend membranes for direct methanol fuel cells , 2008 .

[728]  Jong Hak Kim,et al.  Preparation and characterization of crosslinked proton conducting membranes based on chitosan and PSSA-MA copolymer , 2009 .

[729]  Enrico Negro,et al.  Structure, properties and proton conductivity of Nafion/[(TiO2)⋅(WO3)0.148]ψTiO2 nanocomposite membranes , 2010 .

[730]  Steven Holdcroft,et al.  Synthetic Strategies for Controlling the Morphology of Proton Conducting Polymer Membranes , 2005 .

[731]  J. Mcgrath,et al.  Segmented sulfonated poly(arylene ether sulfone)-b-polyimide copolymers for proton exchange membrane fuel cells. I. Copolymer synthesis and fundamental properties , 2007 .

[732]  D. Peck,et al.  Hydroscopic strontium hydroxide/Nafion composite membrane for a direct methanol fuel cell , 2008 .

[733]  Chuh‐Yung Chen,et al.  Blended Nafion®/SPEEK direct methanol fuel cell membranes for reduced methanol permeability , 2009 .

[734]  Ji Young Kim,et al.  Surface-modified Nafion membrane by oleylamine-stabilized Pd nanoparticles for DMFC applications , 2007 .

[735]  G. Lu,et al.  Proton conductive composite membrane of phosphosilicate and polyvinyl alcohol , 2007 .

[736]  Jing Pan,et al.  High‐Performance Alkaline Polymer Electrolyte for Fuel Cell Applications , 2010 .

[737]  Hideto Matsuyama,et al.  Effect of addition of organic microspheres on proton conductivity property of sulfonated poly(arylene ether sulfone) membrane , 2008 .

[738]  Tao Yang.  Preliminary study of SPEEK/PVA blend membranes for DMFC applications , 2008 .

[739]  G. Giffin,et al.  Spectroscopic investigation of proton-conducting, cross-linked linear poly(ethylenimine) hydrochloride membranes , 2009 .

[740]  Y. Lee,et al.  Synthesis of Crosslinked Sulfonated Poly(phenylene sulfide sulfone nitrile) for Direct Methanol Fuel Cell Applications. , 2009, Macromolecular rapid communications.

[741]  A. Manthiram,et al.  Sulfonated polysulfone with 1,3-1H-dibenzimidazole-benzene additive as a membrane for direct methanol fuel cells , 2008 .

[742]  M. Paredes,et al.  Synthesis and characterization of sulfonated poly(ether imide) membranes using thermo-analysis and dialysis process , 2008 .

[743]  Fuel cell performance of polymer electrolyte membrane based on hexafluorinated sulfonated poly(ether sulfone) , 2009 .

[744]  M. Dupuis,et al.  Atomistic simulation of nafion membrane: I. Effect of hydration on membrane nanostructure. , 2007, The journal of physical chemistry. B.

[745]  Yanxiang Li,et al.  Synthesis and characterization of partially fluorinated hydrophobic–hydrophilic multiblock copolymers containing sulfonate groups for proton exchange membrane , 2007 .

[746]  J. Mcgrath,et al.  Hydrocarbon and partially fluorinated sulfonated copolymer blends as functional membranes for proton exchange membrane fuel cells , 2007 .

[747]  Werner Lehnert,et al.  Membrane electrode assemblies for high-temperature polymer electrolyte fuel cells based on poly(2,5-benzimidazole) membranes with phosphoric acid impregnation via the catalyst layers , 2009 .

[748]  R. García-Valls,et al.  Morphological, chemical surface and electrical characterizations of lignosulfonate-modified membranes , 2007 .

[749]  C. Ma,et al.  High proton-conducting Nafion®/–SO3H functionalized mesoporous silica composite membranes , 2007 .

[750]  Dan Wu,et al.  A simple heat treatment to prepare covalently crosslinked membranes from sulfonated poly(2,6-dimethyl-1,4-phenylene oxide) for application in fuel cells , 2010 .

[751]  M. Ueda,et al.  Synthesis and properties of sulfonated multiblock copoly(ether sulfone)s by a chain extender , 2008 .

[752]  B. Smitha,et al.  Proton-conducting composite membranes of chitosan and sulfonated polysulfone for fuel cell application , 2008 .

[753]  Huamin Zhang,et al.  Investigation of the Ag-SiO2/sulfonated poly(biphenyl ether sulfone) composite membranes for fuel cell , 2007 .

[754]  M. Pan,et al.  Self-assembly of Nafion molecules onto silica nanoparticles formed in situ through sol-gel process. , 2008, Journal of colloid and interface science.

[755]  Dong Hwa Lee,et al.  Thermal, mechanical and electrical properties on the styrene-grafted and subsequently sulfonated FEP film induced by electron beam , 2008 .

[756]  Fei Yu,et al.  Novel anion-exchange organic–inorganic hybrid membranes: Preparation and characterizations for potential use in fuel cells , 2008 .

[757]  Brant A. Peppley,et al.  Quaternized-chitosan membranes for possible applications in alkaline fuel cells , 2008 .

[758]  Y. Hudiono,et al.  Porous layered oxide/Nafion® nanocomposite membranes for direct methanol fuel cell applications , 2009 .

[759]  D. Thompsett,et al.  Microblock Ionomers: A New Concept in High Temperature, Swelling‐Resistant Membranes for PEM Fuel Cells , 2009 .

[760]  H. Allcock,et al.  Inorganic-organic hybrid polymers with pendent sulfonated cyclic phosphazene side groups as potential proton conductive materials for direct methanol fuel cells , 2008 .