Observability-Index-Based Control Strategy for Induction Machine Sensorless Drive at Low Speed

This paper focuses on the observer-based methods for induction machine sensorless drive. It is well known that the use of speed observer is limited at a very low stator frequency due to speed unobservability. Some existing methods propose to avoid the zero-stator-frequency working points. These methods are nonetheless limited to high-torque operations. The first contribution of this paper is to analyze finely the speed observability, which leads to the definition of an observability index. The correlation between this index and the observer performance is analyzed and illustrated. The second contribution is to propose a control strategy that maximizes the observability index and improves the observer performance. The proposed strategy is tested first in open loop to evaluate the speed observer performance, and then, in closed loop to illustrate its pertinence for induction machine sensorless drive. All these results are validated by an experiment. The performed experimentation shows that the proposed control strategy gives better results than the existing method that avoid the zero-frequency working points. It offers a new path for induction machine sensorless drives.

[1]  Frank Allgöwer,et al.  Avoidance of Poorly Observable Trajectories: A Predictive Control Perspective , 2008 .

[2]  Joachim Holtz,et al.  Sensorless Control of Induction Machines - With or Without Signal Injection? , 2006, IEEE Trans. Ind. Electron..

[3]  Guillaume Sandou,et al.  Discussion on “AC Drive Observability Analysis” , 2015, IEEE Transactions on Industrial Electronics.

[4]  M. Schroedl,et al.  Sensorless control of AC machines at low speed and standstill based on the "INFORM" method , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[5]  C. Schauder,et al.  Adaptive speed identification for vector control of induction motors without rotational transducers , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[6]  Petru-Daniel Morosan,et al.  Closed loop optimal experiment design for on-line parameter estimation , 2014, 2014 European Control Conference (ECC).

[7]  Murat Barut,et al.  Speed-Sensorless Estimation for Induction Motors Using Extended Kalman Filters , 2007, IEEE Transactions on Industrial Electronics.

[8]  Dianguo Xu,et al.  Robustness Improvement of Speed Estimation in Speed-Sensorless Induction Motor Drives , 2016, IEEE Transactions on Industry Applications.

[9]  Heiko Zatocil.  Sensorless control of induction motor drives in the zero frequency speed range , 2009, 2009 13th European Conference on Power Electronics and Applications.

[10]  Pierre Rouchon,et al.  Current Controller for Low-Frequency Signal Injection and Rotor Flux Position Tracking at Low Speeds , 2011, IEEE Transactions on Industrial Electronics.

[11]  Arthur J. Krener,et al.  Measures of unobservability , 2009, Proceedings of the 48h IEEE Conference on Decision and Control (CDC) held jointly with 2009 28th Chinese Control Conference.

[12]  Malek Ghanes,et al.  Observability Study and Observer-Based Interconnected Form for Sensorless Induction Motor , 2006, Proceedings of the 45th IEEE Conference on Decision and Control.

[13]  R. Kálmán.  On the general theory of control systems , 1959 .

[14]  J. Hahn,et al.  Sensor Location for Stable Nonlinear Dynamic Systems: Multiple Sensor Case , 2006 .

[15]  Kouki Matsuse,et al.  Regenerating-mode low-speed operation of sensorless induction motor drive with adaptive observer , 2002 .

[16]  Henry Louis Ablin.  Criteria for degree of observability in a control system , 1967 .

[17]  J. Luomi,et al.  Speed sensorless induction machine control for zero speed and frequency , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[18]  Jung-Ik Ha,et al.  Sensorless field orientation control of an induction machine by high frequency signal injection , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[19]  Surapong Suwankawin,et al.  Design strategy of an adaptive full-order observer for speed-sensorless induction-motor Drives-tracking performance and stabilization , 2006, IEEE Transactions on Industrial Electronics.

[20]  A. Krener,et al.  Nonlinear controllability and observability , 1977 .

[21]  Ivo Herman,et al.  AC Drive Observability Analysis , 2013, IEEE Transactions on Industrial Electronics.

[22]  C. C. Wit,et al.  Observability conditions of induction motors at low frequencies , 2000, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187).

[23]  Seung-Ki Sul,et al.  Sensorless control of AC motor — Where are we now? , 2011, 2011 International Conference on Electrical Machines and Systems.

[24]  H. Weber,et al.  Analysis and optimization of certain qualities of controllability and observability for linear dynamical systems , 1972 .

[25]  H.A. Toliyat,et al.  Selection criteria of induction machines for speed-sensorless drive applications , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[26]  Mark Sumner,et al.  Performance of HF signal injection techniques for zero-low-frequency vector control of induction Machines under sensorless conditions , 2006, IEEE Transactions on Industrial Electronics.

[27]  J. Marsden,et al.  A subspace approach to balanced truncation for model reduction of nonlinear control systems , 2002 .

[28]  T. Du,et al.  Design and application of extended observers for joint state and parameter estimation in high-performance AC drives , 1995 .

[29]  Seung-Ki Sul,et al.  Speed sensorless vector control of induction motor using extended Kalman filter , 1994 .

[30]  Xuefang Lin-Shi,et al.  Optimal low-stator-frequency avoidance strategy to improve the performances of induction machine sensorless drives , 2015, 2015 IEEE Symposium on Sensorless Control for Electrical Drives (SLED).

[31]  Adriano Fagiolini,et al.  Convergence Analysis of Extended Kalman Filter for Sensorless Control of Induction Motor , 2015, IEEE Transactions on Industrial Electronics.

[32]  C. Xiao.  Speed Sensorless Control of Induction Motors , 2008 .

[33]  Sandro Macchietto,et al.  Model-based design of experiments for parameter precision: State of the art , 2008 .