Seismic behavior of isolated bridges: A-state-of-the-art review

An update state-of-the-art-review of the behaviour of isolated bridges to seismic excitation is presented. The review includes the literature on theoretical aspects of seismic isolation, parametric behaviour of baseisolated bridges and experimental studies to verify some of the theoretical findings. A brief review of the earlier and current base isolation devices, proposed or implemented, is given, and aspects for future research in the area of isolation of bridges are included.

[1]  Mauro Dolce,et al.  SEISMIC ISOLATION OF RAILWAY BRIDGES , 1998 .

[2]  Tsung-Wu Lin,et al.  Base isolation by free rolling rods under basement , 1993 .

[3]  G. G. Penelis,et al.  Retrofitting of an existing concrete bridge using base isolation concept , 1998 .

[4]  Hirokazu Iemura,et al.  Control of Seismic Energy Partitioning of Bridge Piers with Sliding Rubber Bearing , 2001 .

[5]  L. H. Sheng,et al.  Effective Stiffness and Equivalent Damping of Base-Isolated Bridges , 1993 .

[6]  Liao Wen.  Responses of isolated bridges subjected to near-fault ground motions , 2001 .

[7]  James M. Kelly,et al.  Aseismic base isolation: review and bibliography , 1986 .

[8]  Gian Michele Calvi,et al.  CONCEPTUAL DESIGN OF ISOLATION SYSTEMS FOR BRIDGE STRUCTURES , 1997 .

[9]  Stephen A. Mahin,et al.  A Simple Pendulum Technique for Achieving Seismic Isolation , 1990 .

[10]  Issam E. Harik,et al.  Pullback Testing of Seismically Isolated P/C I-Girder Bridge , 1998 .

[11]  Yukio ADACHI,et al.  NON-LINEAR SEISMIC RESPONSE CHARACTERISTICS STUDY OF A RC BRIDGE COLUMN WITH SEISMIC ISOLATORS BY A SHAKING TABLE TEST , 1999 .

[12]  M. Khodaverdian,et al.  Dynamics of resilient‐friction base isolator (R‐FBI) , 1987 .

[13]  Ronald L. Mayes,et al.  The Application of Seismic Isolation to Bridges , 1989 .

[14]  J. S. Hwang,et al.  A Refined Model for Base-Isolated Bridges with Bi-Linear Hysteretic Bearings , 1996 .

[15]  Gian Michele Calvi,et al.  OPTIMAL DESIGN OF ISOLATED BRIDGES AND ISOLATION SYSTEMS FOR EXISTING BRIDGES , 1998 .

[16]  Joseph Penzien.  Earthquake Engineering for Transportation Structures—Past, Present, and Future , 2001 .

[17]  Yozo Fujino,et al.  Identification of soil–structure interaction effect in base-isolated bridges from earthquake records , 2001 .

[18]  M. Livolant,et al.  Seismic isolation using sliding-elastomer bearing pads , 1985 .

[19]  Wei-Hsin Liao,et al.  SEISMIC RESPONSE ANALYSIS OF BRIDGES ISOLATED WITH FRICTION PENDULUM BEARINGS , 1998 .

[20]  R. S. Jangid.  Response of sliding structures to bi-directional excitation , 2001 .

[21]  Mauro Dolce,et al.  SMA DEVICES FOR SEISMIC ISOLATION OF BRIDGES: DESIGN AND EXPERIMENTAL BEHAVIOR , 1998 .

[22]  Michael C. Constantinou,et al.  Displacement Control Device for Base-Isolated Bridges , 1991 .

[23]  Ahmed Ghobarah,et al.  SEISMIC PERFORMANCE OF HIGHWAY BRIDGES , 1988 .

[24]  Masanobu Shinozuka,et al.  Energy dissipating restrainers for highway bridges , 2000 .

[25]  William Robinson,et al.  Lead‐rubber hysteretic bearings suitable for protecting structures during earthquakes , 1982 .

[26]  Athol J. Carr,et al.  Design Method for Bridges on Lead‐Rubber Bearings , 1989 .

[27]  Joseph P. Nicoletti,et al.  Seismic Design and Retrofit of Bridges , 1996 .

[28]  P. Franchin,et al.  On the accuracy of simplified methods for the analysis of isolated bridges , 2001 .

[29]  Gian Michele Calvi,et al.  ITALIAN AND EUROPEAN GUIDELINES FOR SEISMIC DESIGN OF ISOLATED BRIDGES , 1998 .

[30]  Shuji IWATA,et al.  HYBRID EARTHQUAKE LOADING TEST ( PSEUDO-DYNAMIC TEST ) OF BI-DIRECTIONAL BASE ISOLATION BEARING FOR A LARGE PEDESTRIAN BRIDGE , 1999 .

[31]  Li Xiaoming.  Optimization of the stochastic response of a bridge isolation system with hysteretic dampers , 1989 .

[32]  Zexiang Li,et al.  Hybrid Control of Seismic-Excited Bridge Structures Using Variable Dampers , 1993 .

[33]  P. TSOPELAS,et al.  Experimental study of FPS system in bridge seismic isolation , 1996 .

[34]  Michael C. Constantinou,et al.  SENSITIVITY OF RESPONSE OF ISOLATED BRIDGES TO MODELING AND DESIGN PARAMETERS - A CASE STUDY , 1998 .

[35]  Krzysztof Wilde,et al.  Pounding of superstructure segments in isolated elevated bridge during earthquakes , 1998 .

[36]  James M. Kelly,et al.  Hysteretic dampers for earthquake‐resistant structures , 1974 .

[37]  S Unjoh,et al.  SEISMIC RESPONSE CONTROL OF LONG-SPAN CABLE-STAYED BRIDGES BY DUAL TUNED MASS DAMPERS , 1997 .

[38]  J. S. Hwang,et al.  Composite damping ratio of seismically isolated regular bridges , 1997 .

[39]  James M. Kelly,et al.  Seismic response of heavily damped base isolation systems , 1993 .

[40]  R. S. Jangid,et al.  Seismic behaviour of base-isolated buildings : a state-of-the-art review , 1995 .

[41]  A. Ghobarah.  Seismic behaviour of highway bridges with base isolation , 1988 .

[42]  Yozo Fujino,et al.  System Identification of Two Base-Isolated Bridges Using Seismic Records , 2000 .

[43]  Masato ABE,et al.  DYNAMIC BEHAVIOR AND SEISMIC PERFORMANCE OF BASE-ISOLATED BRIDGES IN OBSERVED SEISMIC RECORDS , 1999 .

[44]  Giuseppe Mancini,et al.  Pile foundation for the seismic isolation of girder bridges , 2000 .

[45]  S. K. Thakkar,et al.  Study of Seismic Base Isolation of Bridge Considering Soil Structure Interaction , 1995 .

[46]  Ronald L. Mayes.  Seismic Isolation of Bridges Using Elastomeric Isolation Systems , 1996 .

[47]  Toshiyuki SUGIYAMA.  COMPARISON OF SEISMIC RESPONSE BETWEEN BRIDGE WITH SLIDING-TYPE BASE-ISOLATION SYSTEM AND THAT WITH LAMINATED RUBBER BEARING , 1999 .

[48]  R. Y. Tan,et al.  System identification of a bridge with lead–rubber bearings , 2000 .

[49]  L. H. Sheng,et al.  Equivalent elastic seismic analysis of base-isolated bridges with lead-rubber bearings , 1994 .

[50]  J. M. Chiou,et al.  An equivalent linear model of lead-rubber seismic isolation bearings , 1996 .

[51]  Naser Mostaghel,et al.  Response of sliding structures to earthquake support motion , 1983 .

[52]  Emmanuel A. Maragakis,et al.  Effect of base isolation on the seismic response of multi-column bridges , 1999 .

[53]  Yozo Fujino,et al.  Performance evaluation of base-isolated Yama-agé bridge with high damping rubber bearings using recorded seismic data , 2001 .

[54]  Hyun Moo KOH,et al.  COST EFFECTIVENESS OF SEISMIC ISOLATION FOR BRIDGES IN LOW AND MODERATE SEISMIC REGION , 1999 .

[55]  Michael C. Constantinou,et al.  SHAKING TABLE TEST OF A MODEL BRIDGE WITH SLIDING TYPE BASE ISOLATION SYSTEM , 1995 .

[56]  J. S. Hwang,et al.  Practical Analysis of Bridges on Isolation Bearings with Bi-Linear Hysteresis Characteristics , 1994 .

[57]  Gregory I. Orsolini,et al.  Seismic analysis and base isolation retrofit design of a steel truss vertical lift bridge , 1999 .

[58]  H. M. Ali,et al.  Seismic design of base-isolated highway bridges utilizing lead-rubber bearings , 1990 .

[59]  E. A. Delis,et al.  Analytical Studies for Seismic Isolation in Highway Bridges , 1997 .

[60]  Giovanni Solari,et al.  Stochastic analysis of the linear equivalent response of bridge piers with aseismic devices , 1999 .

[61]  J. S. Hwang,et al.  Analytical Modeling of High Damping Rubber Bearings , 1997 .

[62]  M. Mezzi,et al.  Seismic isolation on bridges in Italy , 1992 .

[63]  Bjarni Bessason.  Earthquake response of seismically isolated bridges , 1996 .

[64]  Panos Tsopelas,et al.  Experimental study of bridge seismic sliding isolation systems , 1996 .

[65]  Paolo Negro,et al.  TESTING OF BRIDGES WITH ISOLATION/DISSIPATION DEVICES AT ELSA LABORATORY , 1998 .

[66]  Michael C. Constantinou,et al.  Study of elastoplastic bridge seismic isolation system , 1997 .

[67]  Michael C. Constantinou,et al.  Sliding Isolation System for Bridges: Analytical Study , 1992 .

[68]  Athol J. Carr,et al.  Compression behaviour of bridge bearings used for seismic isolation , 1996 .

[69]  Krzysztof Wilde,et al.  Base isolation system with shape memory alloy device for elevated highway bridges , 2000 .

[70]  R. S. Jangid,et al.  EFFECTIVENESS OF ELLIPTICAL ROLLING RODS FOR BASE ISOLATION , 1998 .

[71]  Ronald L. Mayes,et al.  Closure of "AASHTO Seismic Isolation Design Requirements for Highway Bridges" , 1992 .

[72]  Toshiro HAYASHIKAWA,et al.  NONLINEAR DYNAMIC BEHAVIOR AND SEISMIC ISOLATION OF STEEL TOWERS OF CABLE-STAYED BRIDGES UNDER GREAT EARTHQUAKE GROUND MOTION , 1999 .

[73]  Azadeh Parvin,et al.  The use of helical spring and fluid damper isolation systems for bridge structures subjected to vertical ground acceleration , 2001 .

[74]  Y NARIYUKI,et al.  INTERACTION OF NONLINEAR RESPONSE BETWEEN PIER AND ISOLATOR IN SEISMICALLY ISOLATED BRIDGES , 1999 .

[75]  Kazuhiko Kawashima,et al.  Hybrid control of seismic‐excited bridge structures , 1995 .

[76]  R A Imbsen,et al.  THE I-40 MISSISSIPPI RIVER BRIDGE SEISMIC RETROFIT , 1999 .

[77]  Firdaus E. Udwadia,et al.  Periodic response of a sliding oscillator system to harmonic excitation , 1983 .

[78]  J. S. Hwang.  EVALUATION OF EQUIVALENT LINEAR ANALYSIS METHODS OF BRIDGE ISOLATION. TECHNICAL NOTE , 1996 .

[79]  Ronald L. Mayes,et al.  Seismic Isolation: History, Application, and Performance—A World View , 1990 .

[80]  Iradj G. Tadjbakhsh,et al.  Response of Sliding Rigid Structure to Base Excitation , 1984 .

[81]  M R Capron.  SEISMIC RETROFIT OF THE POPLAR STREET BRIDGE , 1999 .

[82]  Athol J. Carr,et al.  DEVELOPMENT OF A DESIGN PROCEDURE FOR BRIDGES ON LEAD-RUBBER BEARINGS , 1989 .

[83]  Michael C. Constantinou,et al.  Sliding Isolation System for Bridges: Experimental Study , 1992 .

[84]  Peter J. Moss,et al.  Seismic Design of Bridges on Lead-Rubber Bearings , 1987 .

[85]  Goodarz Ahmadi,et al.  Performance of Sliding Resilient‐Friction Base‐Isolation System , 1991 .

[86]  R. M. Mutobe,et al.  Nonlinear analysis of a large bridge with isolation bearings , 1999 .

[87]  Andrei M. Reinhorn,et al.  Teflon Bearings in Base Isolation I: Testing , 1990 .