Reverse programming the optimal process mean problem to identify a factor space profile

For the manufacturer that intends to reduce the processing costs without sacrificing product quality, the identification of the optimal process mean is a problem frequently revisited. The traditional method to solving this problem involves making assumptions on the process parameter values and then determining the ideal location of the mean based upon various constraints such as cost or the degree of quality loss when a product characteristic deviates from its desired target value. The optimal process mean, however, is affected not only by these settings but also by any shift in the variability of a process, thus making it extremely difficult to predict with any accuracy. In contrast, this paper proposes the use of a reverse programming scheme to determine the relationship between the optimal process mean and the settings within an experimental factor space. By doing so, one may gain increased awareness of the sensitivity and robustness of a process, as well as greater predictive capability in the setting of the optimal process mean. Non-linear optimization programming routines are used from both a univariate and multivariate perspective in order to illustrate the proposed methodology.

[1]  A.-B. Shaibu,et al.  Economic selection of optimal target values , 2000 .

[2]  Lloyd S. Nelson,et al.  Best Target Value for a Production Process , 1978 .

[3]  Paul B. Lochert,et al.  A fuzzy logic approach for dealing with qualitative quality characteristics of a process , 2008, Expert Syst. Appl..

[4]  Chao-Yu Chou,et al.  Determining the Optimum Process Mean Under the Bivariate Quality Characteristics , 2003 .

[5]  M. A. Rahim,et al.  Reducing performance variation in the canning problem , 1996 .

[6]  Connie M. Borror,et al.  Using Genetic Algorithms to Generate Mixture-Process Experimental Designs Involving Control and Noise Variables , 2005 .

[7]  D. C. Bettes.  Finding an Optimum Target Value in Relation to a Fixed Lower Limit and an Arbitrary Upper Limit , 1962 .

[8]  R. N. Ibrahim,et al.  Quality evaluation model using loss function for multiple S-type quality characteristics , 2005 .

[9]  P. R. Moorhead,et al.  Cost-driven parameter design , 1998 .

[10]  Alejandro Heredia-Langner,et al.  A Genetic Algorithm Approach to Multiple-Response Optimization , 2004 .

[11]  Kwei Tang,et al.  Joint determination of process mean, production run size and material order quantity for a container-filling process , 2000 .

[12]  Byung Rae Cho,et al.  Joint optimization in process target and tolerance limit for L -type quality characteristics , 2006 .

[13]  B.-R. Cho,et al.  Design of the optimum product specifications for S-type quality characteristics , 1998 .

[14]  Raafat N Ibrahim,et al.  THE TARGETING PROBLEM FOR S-TYPE QUALITY CHARACTERISTICS , 2007 .

[15]  Elsayed A. Elsayed,et al.  Process mean and screening limits for filling processes under two-stage screening procedure , 2002, Eur. J. Oper. Res..

[16]  M.-H. Caleb Li,et al.  Optimal target selection for unbalanced tolerance design , 2004 .

[17]  M. A. Darwish,et al.  Optimal selection of process mean for a stochastic inventory model , 2013, Eur. J. Oper. Res..

[18]  Fred A. Spiring,et al.  The reflected normal loss function , 1993 .

[19]  Byung Rae Cho,et al.  Economic design of the specification region for multiple quality characteristics , 1996 .

[20]  C George,et al.  A Balancing Act: Optimizing a Product's Properties , 1994 .

[21]  Raafat N Ibrahim,et al.  Evaluating the product quality level under multiple L-type quality characteristics , 2005 .

[22]  M. A. Rahim,et al.  Integrated model for determining the optimal initial settings of the process mean and the optimal production run assuming quadratic loss functions , 2004 .

[23]  Jirarat Teeravaraprug,et al.  Designing the optimal process target levels for multiple quality characteristics , 2002 .

[24]  Raafat N Ibrahim,et al.  Evaluating the quality level of a product with multiple quality characterisitcs , 2004 .

[25]  C.-H. Chen,et al.  Determining the Optimum Process Mean for a Poor Process , 2002 .

[26]  C.H. Chen.  Determining the optimum process mean based on asymmetric quality loss function and rectifying inspection plan , 2004, 2004 IEEE International Engineering Management Conference (IEEE Cat. No.04CH37574).

[27]  Byung Rae Cho,et al.  Joint optimization of process target mean and tolerance limits with measurement errors under multi-decision alternatives , 2007, Eur. J. Oper. Res..

[28]  Chung-Ho Chen,et al.  Economic manufacturing quantity, optimum process mean, and economic specification limits setting under the rectifying inspection plan , 2007, Eur. J. Oper. Res..

[29]  G. Derringer,et al.  Simultaneous Optimization of Several Response Variables , 1980 .

[30]  William G. Hunter,et al.  Determining the Most Profitable Target Value for a Production Process , 1977 .

[31]  Fred A. Spiring,et al.  The inverted beta loss function: properties and applications , 2002 .

[32]  Paul L. Goethals,et al.  Solving the optimal process target problem using response surface designs in heteroscedastic conditions , 2011 .

[33]  Elsayed A. Elsayed,et al.  Optimal levels of process parameters for products with multiple characteristics , 1993 .

[34]  Feng-Bin Sun,et al.  On Spiring's normal loss function , 1996 .

[35]  Asif Iqbal,et al.  A fuzzy expert system for optimizing parameters and predicting performance measures in hard-milling process , 2007, Expert Syst. Appl..

[36]  John W. Fowler,et al.  Determining the optimal target for a process with multiple markets and variable holding costs , 2000 .

[37]  G. Geoffrey Vining,et al.  Combining Taguchi and Response Surface Philosophies: A Dual Response Approach , 1990 .

[38]  Stephen M. Pollock,et al.  The canning problem revisited: The case of capacitated production and fixed demand , 1998, Eur. J. Oper. Res..

[39]  Mohammed A. Darwish.  Economic selection of process mean for single-vendor single-buyer supply chain , 2009, Eur. J. Oper. Res..

[40]  Samar K. Mukhopadhyay,et al.  Optimal process variance under Taguchi loss , 1995 .

[41]  C. K. Kwong,et al.  Inexact genetic algorithm approach to target values setting of engineering requirements in QFD , 2003 .

[42]  A. de Korvin,et al.  Fuzzy quality function deployment: determining the distributions of effort dedicated to technical change , 2004 .