Full FPGA Tracking Control System Based on Error-Based Communication Disturbance Observer Considering Time Delay for Optical Disc System

[1]  Kiyoshi Ohishi,et al.  High Precision Tracking Control based on Pseudo-Inverse Feedforward Control System for Next-Generation Optical Disks , 2012 .

[2]  Farzad Rajaei Salmasi,et al.  Speed Sensorless and Sensor-Fault Tolerant Optimal PI Regulator for Networked DC Motor System With Unknown Time-Delay and Packet Dropout , 2014, IEEE Transactions on Industrial Electronics.

[3]  Dale A. Lawrence Stability and transparency in bilateral teleoperation , 1993, IEEE Trans. Robotics Autom..

[4]  Kiyoshi Ohishi,et al.  Fine Tracking Control System based on Double Equivalent-Perfect Tracking Control System and Error-Based Disturbance Observer for Optical Disk , 2015 .

[5]  Kouhei Ohnishi,et al.  A Design Method of Communication Disturbance Observer for Time-Delay Compensation, Taking the Dynamic Property of Network Disturbance Into Account , 2008, IEEE Transactions on Industrial Electronics.

[6]  Bartosz Trybus,et al.  Architecture of FPGA Embedded Multiprocessor Programmable Controller , 2015, IEEE Transactions on Industrial Electronics.

[7]  Wei Wang,et al.  Input-to-State Stability for Networked Predictive Control With Random Delays in Both Feedback and Forward Channels , 2014, IEEE Transactions on Industrial Electronics.

[8]  Kiyoshi Ohishi,et al.  Robust tracking servo system considering force disturbance for the optical disk recording system , 2006, IEEE Transactions on Industrial Electronics.

[9]  Nguyen Trung Hieu,et al.  FPGA-Based Sensorless PMSM Speed Control Using Reduced-Order Extended Kalman Filters , 2014, IEEE Transactions on Industrial Electronics.

[10]  Kouhei Ohnishi,et al.  Time-Delay Compensation by Communication Disturbance Observer for Bilateral Teleoperation Under Time-Varying Delay , 2010, IEEE Transactions on Industrial Electronics.

[11]  Shaomin Xiong,et al.  Hard Disk Drive Servo System Based on Field-Programmable Gate Arrays , 2014, IEEE Transactions on Industrial Electronics.

[12]  Kiyoshi Ohishi,et al.  Double Feedforward Control System Based on Precise Disturbance Modeling for Optical Disk (Special Issue : Optical Memories) , 2013 .

[13]  Yoshiyuki Urakawa,et al.  A Study of High-Gain Servo Controller with Complex Zeros for Optical Disk Drives , 2005 .

[14]  O. J. M. Smith,et al.  A controller to overcome dead time , 1959 .

[15]  G. Kino,et al.  Solid immersion microscope , 1990 .

[16]  Kouhei Ohnishi,et al.  Stability Analysis and Practical Design Procedure of Time Delayed Control Systems With Communication Disturbance Observer , 2008, IEEE Transactions on Industrial Informatics.

[17]  Donghua Zhou,et al.  Output Tracking Control for Networked Systems: A Model-Based Prediction Approach , 2014, IEEE Transactions on Industrial Electronics.

[18]  Yoshiyuki Urakawa,et al.  Double-Boosted High-Gain Servo Controller for High-Rotation-Speed Optical Disk Drives , 2008 .

[19]  K. Ohishi,et al.  A 252-Mb/s Recording Experiment Using Flexible Optical Disks for Broadcast Use , 2009, IEEE Transactions on Magnetics.

[20]  Leonard Weiss,et al.  Prony’s Method, Z-Transforms, and Padé Approximation , 1963 .

[21]  Yoshiyuki Urakawa,et al.  演算時間遅れのあるディジタル制御系での限定極配置法による制御パラメータ算出について;演算時間遅れのあるディジタル制御系での限定極配置法による制御パラメータ算出について;Parameter Design for a Digital Control System with Calculation Delay Using a Limited Pole Placement Method , 2013 .