Cesium carbonate as a functional interlayer for polymer photovoltaic devices

The device characteristics of polymer solar cells with cesium carbonate (Cs2CO3) as an electron-injection interlayer have been investigated. It is found that the insertion of Cs2CO3 at the cathode interface improves the device power conversion efficiency from 2.3% to 3.1%. In order to further understand the mechanism, the interfacial interaction between the active organic layer and the cathode was studied by x-ray photoemission spectroscopy (XPS). The results of XPS measurement indicate the fact that a portion of electrons transfer from the interlayer into the organic layer, resulting in n-type doping. The n-doping effect enhances the efficiency of electron injection and collection. Further, the maximum open-circuit voltage (Voc) was determined from its temperature dependence. For the device with Cs2CO3, the maximum Voc is extremely close to the corresponding value of the energy difference between the highest occupied molecular orbital of the electron donor and the lowest unoccupied molecular orbital of t...

[1]  Yu-Hung Chen,et al.  Electronic structures and electron-injection mechanisms of cesium-carbonate-incorporated cathode structures for organic light-emitting devices , 2006 .

[2]  Niyazi Serdar Sariciftci,et al.  Effects of Postproduction Treatment on Plastic Solar Cells , 2003 .

[3]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[4]  C. Tang,et al.  Enhanced electron injection in organic electroluminescence devices using an Al/LiF electrode , 1997 .

[5]  V. Mihailetchi,et al.  Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells , 2003 .

[6]  Vishal Shrotriya,et al.  Efficient inverted polymer solar cells , 2006 .

[7]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[8]  Zhenghong Lu,et al.  Interaction between organic semiconductors and LiF dopant , 2004 .

[9]  Valentin D. Mihailetchi,et al.  Light intensity dependence of open-circuit voltage of polymer: fullerene solar cells , 2005 .

[10]  T. Wen,et al.  Organic oxide/Al composite cathode in efficient polymer light-emitting diodes , 2006 .

[11]  Gang Li,et al.  Achieving High‐Efficiency Polymer White‐Light‐Emitting Devices , 2006 .

[12]  C. Brabec,et al.  Effect of LiF/metal electrodes on the performance of plastic solar cells , 2002 .

[13]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[14]  Yi-Kai Lin,et al.  Modified buffer layers for polymer photovoltaic devices , 2007 .

[15]  Christoph J. Brabec,et al.  Temperature dependence for the photovoltaic device parameters of polymer-fullerene solar cells under operating conditions , 2001 .

[16]  M. Powalla,et al.  Comparative study of the influence of LiF, NaF, and KF on the performance of polymer bulk heterojunction solar cells , 2007 .

[17]  Liduo Wang,et al.  Elucidation of the electron injection mechanism of evaporated cesium carbonate cathode interlayer for organic light-emitting diodes , 2007 .

[18]  David L. Carroll,et al.  Roles of donor and acceptor nanodomains in 6% efficient thermally annealed polymer photovoltaics , 2007 .

[19]  Valentin D. Mihailetchi,et al.  Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells , 2006 .

[20]  Yang Yang,et al.  Low‐Work‐Function Surface Formed by Solution‐Processed and Thermally Deposited Nanoscale Layers of Cesium Carbonate , 2007 .

[21]  Xiong Gong,et al.  New Architecture for High‐Efficiency Polymer Photovoltaic Cells Using Solution‐Based Titanium Oxide as an Optical Spacer , 2006 .