Atomization characteristics and instabilities in the combustion of multi-component fuel droplets with high volatility differential

We delineate and examine the successive stages of ligament-mediated atomization of burning multi-component fuel droplets. Time-resolved high-speed imaging experiments are performed with fuel blends (butanol/Jet A-1 and ethanol/Jet A-1) comprising wide volatility differential, which undergo distinct modes of secondary atomization. Upon the breakup of vapor bubble, depending on the aspect ratio, ligaments grow and break into well-defined (size) droplets for each mode of atomization. The breakup modes either induce mild/intense oscillations on the droplet or completely disintegrate the droplet (micro-explosion). For the blends with a relatively low volatility difference between the components, only bubble expansion contributes to the micro-explosion. In contrast, for blends with high volatility differential, both bubble growth as well as the instability at the interface contribute towards droplet breakup. The wrinkling pattern at the vapor-liquid interface suggests that a Rayleigh-Taylor type of instability triggered at the interface further expedites the droplet breakup.

[1]  A. Saha,et al.  Thermally induced secondary atomization of droplet in an acoustic field , 2012 .

[2]  E. Jimenez,et al.  Density, Surface Tension, and Refractive Index of Octane + 1-Alkanol Mixtures at T = 298.15 K , 2003 .

[3]  A. Umemura,et al.  Simulation of liquid jet primary breakup: Dynamics of ligament and droplet formation , 2010 .

[4]  Rakesh Kumar Maurya,et al.  Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine , 2011 .

[5]  S. L. Manzello,et al.  On the collision dynamics of a water droplet containing an additive on a heated solid surface , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[6]  David L. Frost,et al.  Effects of Ambient Pressure on the Instability of a Liquid Boiling Explosively at the Superheat Limit , 1984 .

[7]  Explosive boiling of liquid droplets at their superheat limits , 2005 .

[8]  A. Yarin,et al.  Impact of drops on solid surfaces: self-similar capillary waves, and splashing as a new type of kinematic discontinuity , 1995, Journal of Fluid Mechanics.

[9]  Jun'ichi Sato,et al.  Combustion and microexplosion behavior of miscible fuel droplets under high pressure , 1988 .

[10]  F. Dryer,et al.  Disruptive and Micro-Explosive Combustion of Free Droplets in Highly Convective Environments , 1984 .

[11]  Chung King Law,et al.  Combustion and microexplosion of freely falling multicomponent droplets , 1984 .

[12]  S. Basu,et al.  Effect of Particle Concentration on Shape Deformation and Secondary Atomization Characteristics of a Burning Nanotitania Dispersion Droplet , 2015 .

[13]  Michael P Brenner,et al.  Precursors to splashing of liquid droplets on a solid surface. , 2009, Physical review letters.

[14]  Reyes García-Contreras,et al.  Stability, Lubricity, Viscosity, and Cold-Flow Properties of Alcohol−Diesel Blends , 2010 .

[15]  Bradford Sturtevant,et al.  Rapid evaporation at the superheat limit , 1982, Journal of Fluid Mechanics.

[16]  S. Nagel,et al.  Thin film formation during splashing of viscous liquids. , 2010, Physical review. E, Statistical, nonlinear, and soft matter physics.

[17]  S. Basu,et al.  Dynamics and fracture of ligaments from a droplet on a vibrating surface , 2013 .

[18]  Gerard M. Faeth,et al.  Near-limit drop deformation and secondary breakup , 1992 .

[19]  G. M. Fa.  NEAR-LIMIT DROP DEFORMATION AND SECONDARY BREAKUP , 1992 .

[20]  David L. Frost,et al.  Dynamics of explosive boiling of a droplet , 1988 .

[21]  N. P. Komninos,et al.  Homogeneous Charge Compression Ignition (HCCI) Combustion , 2012 .

[22]  S. Karmakar,et al.  Experimental investigations on nucleation, bubble growth, and micro-explosion characteristics during the combustion of ethanol/Jet A-1 fuel droplets , 2017, 1704.06571.

[23]  F. Dryer,et al.  Effect of the ambient pressure on the explosive burning of emulsified and multicomponent fuel droplets , 1985 .

[24]  Estimating the Secondary Droplet Size Distribution after Micro-Explosion of Bio-Fuel Droplets , 2010 .

[25]  S. Chandrasekhar.  Hydrodynamic and Hydromagnetic Stability , 1961 .

[26]  Avinash Kumar Agarwal,et al.  Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines , 2007 .

[27]  Stéphane Zaleski,et al.  Droplet impact on a dry surface: triggering the splash with a small obstacle , 2005, Journal of Fluid Mechanics.

[28]  E. Villermaux,et al.  Drop fragmentation on impact , 2011, Journal of Fluid Mechanics.

[29]  S. Basu,et al.  Experimental Study of Shape Transition in an Acoustically Levitated and Externally Heated Droplet , 2015 .

[30]  L. Ganippa,et al.  Physics of puffing and microexplosion of emulsion fuel droplets , 2014 .

[31]  Brian D. Storey,et al.  Rayleigh–Taylor instability of violently collapsing bubbles , 2002 .

[32]  M. Mikami,et al.  Occurrence probability of microexplosion in droplet combustion of miscible binary fuels , 1998 .

[33]  K. Kobe.  The properties of gases and liquids , 1959 .

[34]  S. Basu,et al.  Phenomenology of break-up modes in contact free externally heated nanoparticle laden fuel droplets , 2016 .

[35]  Dimitrios C. Rakopoulos,et al.  Study of turbocharged diesel engine operation, pollutant emissions and combustion noise radiation during starting with bio-diesel or n-butanol diesel fuel blends , 2011 .

[36]  A. Saha,et al.  Spreading and atomization of droplets on a vibrating surface in a standing pressure field , 2012 .

[37]  G. Taylor.  The instability of liquid surfaces when accelerated in a direction perpendicular to their planes. I , 1950, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[38]  Splash control of drop impacts with geometric targets. , 2011, Physical review. E, Statistical, nonlinear, and soft matter physics.

[39]  S. Basu,et al.  Deformation pathways and breakup modes in acoustically levitated bicomponent droplets under external heating. , 2016, Physical review. E.

[40]  A. Maurel,et al.  Spreading dynamics of drop impacts , 2012, Journal of Fluid Mechanics.

[41]  C. Lee,et al.  Modeling droplet breakup processes under micro-explosion conditions , 2007 .

[42]  C. Avedisian,et al.  On the collision of a droplet with a solid surface , 1991, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[43]  C. Law,et al.  Microexplosion of fuel droplets under high pressure , 1985 .

[44]  D. Sharp.  An overview of Rayleigh-Taylor instability☆ , 1984 .

[45]  M. Mikami,et al.  An experimental and modeling study on stochastic aspects of microexplosion of binary-fuel droplets , 2002 .

[46]  S. Basu,et al.  Insight into instabilities in burning droplets , 2014 .

[47]  S. Basu,et al.  Combustion and heat transfer characteristics of nanofluid fuel droplets: A short review , 2016 .

[48]  Chung King Law,et al.  Internal boiling and superheating in vaporizing multicomponent droplets , 1978 .

[49]  A. Fernandez-Pello,et al.  On the disruptive burning of free droplets of alcohol/n-paraffin solutions and emulsions , 1981 .

[50]  B. Gelfand.  Droplet breakup phenomena in flows with velocity lag , 1996 .

[51]  Richard Bellman,et al.  Effects of Surface Tension and Viscosity on Taylor Instability , 1954 .

[52]  S. K. Som,et al.  Puffing and Micro-Explosion Behavior in Combustion of Butanol/Jet A-1 and Acetone-Butanol-Ethanol (A-B-E)/Jet A-1 Fuel Droplets , 2016, 1611.10199.