A Study of On-Chip Stacked Multiloop Spiral Inductors

This paper proposes a new differential topology that features a stacked multiloop inductor. Comparative studies of stacked one- to four-loop spiral inductors with and without patterned ground shields (PGSs) for silicon-based radio-frequency integrated circuits (RFICs) were conducted, and lumped-element circuit models were developed for these inductors. The partial-element equivalent-circuit method that can accurately analyze mutual inductive couplings among different spirals in these multiloop geometries was employed for capturing the frequency-dependent inductances and resistances of inductors at low frequencies. A good agreement between numerical results and measurements is obtained. It is demonstrated that a stacked multiloop spiral inductor with differential topology and PGS has a larger inductance and a higher Q-factor as compared with the same inductor without differential topology and PGS. This hybrid methodology could provide a promising technique for developing new silicon-based passive devices used in RFICs.

[1]  W. Y. Yin,et al.  Modelling on-chip circular double-spiral stacked inductors for RFICs , 2003 .

[2]  J.J. Liou,et al.  Modeling of On-Chip Differential Inductors and Transformers/Baluns , 2007, IEEE Transactions on Electron Devices.

[3]  A. Niknejad,et al.  Analysis of eddy-current losses over conductive substrates with applications to monolithic inductors and transformers , 2001 .

[4]  Shyh-Jong Chung,et al.  Analytical calculation for DC inductances of rectangular spiral inductors with finite metal thickness in the PEEC formulation , 2006, IEEE Microwave and Wireless Components Letters.

[5]  Yu Cao,et al.  Frequency-independent equivalent circuit model for on-chip spiral inductors , 2002, Proceedings of the IEEE 2002 Custom Integrated Circuits Conference (Cat. No.02CH37285).

[6]  Shen-Iuan Liu,et al.  Miniature 3-D inductors in standard CMOS process , 2002, IEEE J. Solid State Circuits.

[7]  Behzad Razavi,et al.  Stacked inductors and transformers in CMOS technology , 2001 .

[8]  J.A. Yeh,et al.  Characterization of spiral inductors with patterned floating structures , 2004, IEEE Transactions on Microwave Theory and Techniques.

[9]  Yuhua Cheng,et al.  A broad-band lumped element analytic model incorporating skin effect and substrate loss for inductors and inductor like components for silicon technology performance assessment and RFIC design , 2005, IEEE Transactions on Electron Devices.

[10]  Ke-Li Wu,et al.  An efficient PEEC algorithm for modeling of LTCC RF circuits with finite metal strip thickness , 2003, IEEE Microwave and Wireless Components Letters.

[11]  Yan Ding,et al.  An efficient PEEC algorithm for modeling of LTCC RF circuits with finite metal strip thickness , 2003 .

[12]  A. Ruehli.  Equivalent Circuit Models for Three-Dimensional Multiconductor Systems , 1974 .

[13]  J.R. Long,et al.  Shielded passive devices for silicon-based monolithic microwave and millimeter-wave integrated circuits , 2006, IEEE Journal of Solid-State Circuits.

[14]  D. Wilton,et al.  Potential integrals for uniform and linear source distributions on polygonal and polyhedral domains , 1984 .