Review of Magnesium Metal Matrix Composites

[1]  F. Wallace.  The determination of magnesium in aluminium alloys by atomic-absorption spectroscopy , 1963 .

[2]  K. Kainer,et al.  Fracture toughness behaviour of a magnesium alloy metal-matrix composite produced by the infiltration technique , 1991 .

[3]  G. Weatherly,et al.  Formation of magnesium aluminate (spinel) in cast SiC particulate-reinforced Al(A356) metal matrix composites , 1992 .

[4]  L. Hihara,et al.  The galvanic corrosion of SiC monofilament/ZE41 Mg metal-matrix composite in 0.5 M NaNO3 , 1993 .

[5]  Gerald S. Cole,et al.  Metal-matrix composites in the automotive industry: Opportunities and challenges , 1993 .

[6]  D. Lloyd.  Particle reinforced aluminium and magnesium matrix composites , 1994 .

[7]  A. Luo.  Processing, microstructure, and mechanical behavior of cast magnesium metal matrix composites , 1995 .

[8]  Jing Zhu,et al.  Morphology of second-phase precipitates in carbon-fiber- and graphite-fiber-reinforced magnesium-based metal-matrix composites , 1997 .

[9]  H. Biermann,et al.  Influence of reinforcement morphology and matrix strength of metal–matrix composites on the cyclic deformation and fatigue behaviour , 2002 .

[10]  Seh Chun Lim,et al.  Wear behaviour of SiCp-reinforced magnesium matrix composites , 2003 .

[11]  A. M. Merlo,et al.  The contribution of surface engineering to the product performance in the automotive industry , 2003 .

[12]  J. Majumdar,et al.  Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy , 2003 .

[13]  T. Srivatsan,et al.  The tensile behavior of two magnesium alloys reinforced with silicon carbide particulates , 2003 .

[14]  Q. Jiang,et al.  Fabrication of TiB2 particulate reinforced magnesium matrix composites by powder metallurgy , 2004 .

[15]  M. S. Yong,et al.  Process optimisation for a squeeze cast magnesium alloy metal matrix composite , 2005 .

[16]  Q. Jiang,et al.  Fabrication of B4C particulate reinforced magnesium matrix composite by powder metallurgy , 2005 .

[17]  D. Miracle.  Metal matrix composites – From science to technological significance , 2005 .

[18]  William E. Pedersen,et al.  Facing SiCp/Mg metal matrix composites with carbide tools , 2006 .

[19]  A. Bakkar,et al.  Corrosion characterisation of alumina–magnesium metal matrix composites , 2007 .

[20]  M. Gupta,et al.  Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method , 2007 .

[21]  M. Störmer,et al.  Biodegradable magnesium-hydroxyapatite metal matrix composites. , 2007, Biomaterials.

[22]  L. Liu,et al.  Transient liquid phase bonding of TiC reinforced magnesium metal matrix composites (TiCP/AZ91D) using aluminum interlayer , 2008 .

[23]  G. Thompson,et al.  Coating formation by plasma electrolytic oxidation on ZC71/SiC/12p-T6 magnesium metal matrix composite , 2009 .

[24]  A. Bakkar,et al.  Corrosion behaviour of carbon fibres/magnesium metal matrix composite and electrochemical response of its constituents , 2009 .

[25]  M. Horstemeyer,et al.  Comparison of corrosion pitting under immersion and salt-spray environments on an as-cast AE44 magnesium alloy , 2010 .

[26]  R. Arrabal,et al.  Influence of chloride ion concentration and temperature on the corrosion of Mg–Al alloys in salt fog , 2010 .

[27]  N. Palaniswamy,et al.  Corrosion protection by acrylamide treatment for magnesium alloy metal matrix composite (MMC) reinforced with titanium boride , 2010 .

[28]  M. Fathi,et al.  Novel magnesium-nanofluorapatite metal matrix nanocomposite with improved biodegradation behavior. , 2011, Journal of biomedical nanotechnology.

[29]  Kyu C. Cho,et al.  On the strength and strain to failure in particle-reinforced magnesium metal-matrix nanocomposites (Mg MMNCs) , 2012 .

[30]  Alan A. Luo,et al.  Magnesium casting technology for structural applications , 2013 .

[31]  J. Shen,et al.  Effect of ceramic nanoparticle reinforcements on the quasistatic and dynamic mechanical properties of magnesium-based metal matrix composites , 2013 .

[32]  F. Pan,et al.  Synergetic effect of graphene nanoplatelets (GNPs) and multi-walled carbon nanotube (MW-CNTs) on mechanical properties of pure magnesium , 2014 .

[33]  J. I. Skar,et al.  EMERGING TRENDS IN CORROSION PROTECTION OF MAGNESIUM DIE-CASTINGS , 2014 .

[34]  J. Aoh,et al.  Mechanical Behavior Enhancement of AM60/Al2O3p Magnesium Metal–Matrix Nanocomposites by ECAE , 2015 .

[35]  F. Pan,et al.  Use of high energy ball milling to study the role of graphene nanoplatelets and carbon nanotubes reinforced magnesium alloy , 2015 .

[36]  F. Pan,et al.  High temperature mechanical behavior of AZ61 magnesium alloy reinforced with graphene nanoplatelets , 2016 .

[37]  Ana M. C. Grisa,et al.  Acoustic Behavior of Subfloor Lightweight Mortars Containing Micronized Poly (Ethylene Vinyl Acetate) (EVA) , 2016, Materials.

[38]  C. Vogiatzis,et al.  On the sintering mechanisms and microstructure of aluminium–ceramic cenospheres syntactic foams produced by powder metallurgy route , 2016 .

[39]  H. Masjuki,et al.  Tribological performance of nanoparticles as lubricating oil additives , 2016, Journal of Nanoparticle Research.

[40]  A. Dvivedi,et al.  Design and development of novel cost effective casting route for production of metal matrix composites (MMCs) , 2017 .

[41]  A. K. Dahle,et al.  Ex Situ Production Routes for Metal Matrix Nanocomposites , 2017 .

[42]  D. S. Kumar,et al.  Magnesium and Its Alloys , 2017 .

[43]  E. Karthick,et al.  Processing, Microstructure and Mechanical Properties of Al2O3 and SiC Reinforced Magnesium Metal Matrix Hybrid Composites , 2017 .

[44]  D. S. Kumar,et al.  Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method , 2017 .

[45]  M. E. Turan,et al.  Improved wear properties of magnesium matrix composite with the addition of fullerene using semi powder metallurgy , 2018 .

[46]  M. E. Turan,et al.  Mechanical, tribological and corrosion properties of fullerene reinforced magnesium matrix composites fabricated by semi powder metallurgy , 2018 .

[47]  Song-Jeng Huang,et al.  Effects of heat treatment on the microstructure and microplastic deformation behavior of SiC particles reinforced AZ61 magnesium metal matrix composite , 2018 .

[48]  Chung-Hung Chan,et al.  Tribological behavior of biolubricant base stocks and additives , 2018, Renewable and Sustainable Energy Reviews.

[49]  Xiaojun Wang,et al.  Graphene nanoplatelets reinforced Mg matrix composite with enhanced mechanical properties by structure construction , 2018, Materials Science and Engineering: A.

[50]  M. E. Turan,et al.  Effects of carbonaceous reinforcements on microstructure and corrosion properties of magnesium matrix composites , 2018, Materials Chemistry and Physics.

[51]  K. Prakash,et al.  Tribo-Surface Characteristics and Wear Behaviour of SiC@r-GO/Mg Composite Worn under Varying Control Factor , 2019, Silicon.

[52]  K. Ravindra,et al.  Optimization of dry sliding wear properties ofAZ91E/ nano Al2O3 reinforced metal matrix composite with grey relational analysis , 2019, International Journal of Engineering, Science and Technology.

[53]  T. Thankachan,et al.  Experimental investigations on wear and friction behaviour of SiC@r-GO reinforced Mg matrix composites produced through solvent-based powder metallurgy , 2019, Composites Part B: Engineering.

[54]  T. Thankachan,et al.  Investigation of graphene-reinforced magnesium metal matrix composites processed through a solvent-based powder metallurgy route , 2019, Bulletin of Materials Science.

[55]  V. Mohanavel.  Synthesis and evaluation on mechanical properties of LM4/AlN alloy based composites , 2019, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[56]  M. Gupta,et al.  Advanced Metal Matrix Nanocomposites , 2019, Metals.

[57]  Chris Romanowski,et al.  Magnesium Alloy Sheet for Transportation Applications , 2019, The Minerals, Metals & Materials Series.

[58]  Hejun Li,et al.  An analysis of the factors affecting strengthening in carbon fiber reinforced magnesium composites , 2019, Composite Structures.

[59]  Ravinder Kumar,et al.  Critical Overview of Coatings Technology for Metal Matrix Composites , 2019, Journal of Bio- and Tribo-Corrosion.

[60]  M. Martin,et al.  Experimental study of wear characteristics of Al2O3 reinforced magnesium based metal matrix composites , 2019, Materials Today: Proceedings.

[61]  M. Ramakrishna,et al.  Synthesis and mechanical characterization of magnesium reinforced with SiC composites , 2019, Materials Today: Proceedings.

[62]  C. Wen,et al.  Graphene nanoplatelets-reinforced magnesium metal matrix nanocomposites with superior mechanical and corrosion performance for biomedical applications , 2020 .

[63]  M. Ramachandra,et al.  Experimental investigations on depth of penetration and surface integrity in AZ91/Al2O3 nano-composites cut by abrasive water jet , 2020, The International Journal of Advanced Manufacturing Technology.

[64]  R. Dwyer-Joyce,et al.  Tribological behaviour of self-lubricating Mg matrix composites reinforced with silicon carbide and tungsten disulfide , 2020, Tribology International.

[65]  E. Toyserkani,et al.  Design of binder jet additive manufactured co-continuous ceramic-reinforced metal matrix composites , 2020 .

[66]  H. Bakhsheshi‐Rad,et al.  Magnesium-graphene nano-platelet composites: Corrosion behavior, mechanical and biological properties , 2020 .

[67]  N. Singh,et al.  Experimental investigation and effects of process parameters on EDM of Al7075/SiC composite reinforced with magnesium particles , 2020 .

[68]  Mohan K. Pradhan.  Tribological Behavior, Machinability, and Optimization of EDM of AA-2014 Hybrid Composite Reinforced With SiC and Glass Particulates , 2020 .

[69]  L. An,et al.  High performance carbon nanotube-reinforced magnesium nanocomposite , 2020 .