Adaptive Asymmetric Real Laplace Wavelet Filtering and Its Application on Rolling Bearing Early Fault Diagnosis

The early fault of rolling bearing is weak and may not be readily detected. To overcome this issue, the present paper comes up with a rolling bearing fault-diagnosing approach based on adaptive asymmetric real Laplace wavelet (ARLW) filtering, which is on the strength of water cycle optimization algorithm (WCA). Firstly, ARLW is introduced to filter the initial vibration signal since its waveform has the same asymmetric structure as the fault impact. Secondly, the optimum center frequency and bandwidth of ARLW is found out adaptively by applying the WCA through the proposed square envelope fault energy ratio (SEFER). Finally, envelope analysis is conducted to the narrowband signal obtained by the optimum ARLW filtering, and its envelope spectrum presents the rolling bearing fault characteristic frequency apparently. The proposed approach and two existing approaches are all tested in four signal analysis cases. The results are analyzed, and the conclusion is that the approach proposed by the present paper can detect the early fault of rolling bearing more accurately. The present research is valuable for diagnosing the early fault of rolling bearing.

[1]  Jianshe Kang,et al.  A New Improved Kurtogram and Its Application to Bearing Fault Diagnosis , 2015 .

[2]  Xie Xiao-liang Fault diagnosis method of rolling element bearings based on EEMD,measure-factor and fast kurtogram , 2012 .

[3]  Fuzhou Feng,et al.  Weak Fault Feature Extraction of Rolling Bearings Based on an Improved Kurtogram , 2016, Sensors.

[4]  Diego Cabrera,et al.  A review on data-driven fault severity assessment in rolling bearings , 2018 .

[5]  Lin Bo,et al.  Fault diagnosis of rolling element bearing using more robust spectral kurtosis and intrinsic time-scale decomposition , 2016 .

[6]  Hai Qiu,et al.  Wavelet filter-based weak signature detection method and its application on rolling element bearing prognostics , 2006 .

[7]  R. Randall,et al.  OPTIMISATION OF BEARING DIAGNOSTIC TECHNIQUES USING SIMULATED AND ACTUAL BEARING FAULT SIGNALS , 2000 .

[8]  Huaqing Wang,et al.  A New Method for Weak Fault Feature Extraction Based on Improved MED , 2018 .

[9]  J. Antoni The spectral kurtosis: a useful tool for characterising non-stationary signals , 2006 .

[10]  Robert B. Randall,et al.  Rolling element bearing diagnostics—A tutorial , 2011 .

[11]  Yanli Yang,et al.  An Adaptive Spectral Kurtosis Method Based on Optimal Filter , 2017 .

[12]  Minping Jia,et al.  A novel optimized SVM classification algorithm with multi-domain feature and its application to fault diagnosis of rolling bearing , 2018, Neurocomputing.

[13]  Wensheng Su,et al.  Rolling element bearing faults diagnosis based on optimal Morlet wavelet filter and autocorrelation enhancement , 2010 .

[14]  Xu Xin,et al.  Active magnetic bearing rotor system with redundant sensors , 2012 .

[15]  Yaguo Lei,et al.  Application of an improved kurtogram method for fault diagnosis of rolling element bearings , 2011 .

[16]  J. Antoni Fast computation of the kurtogram for the detection of transient faults , 2007 .

[17]  Yaguo Lei,et al.  Envelope harmonic-to-noise ratio for periodic impulses detection and its application to bearing diagnosis , 2016 .

[18]  I. S. Bozchalooi,et al.  A joint resonance frequency estimation and in-band noise reduction method for enhancing the detectability of bearing fault signals , 2008 .

[19]  Dong Wang,et al.  A joint sparse wavelet coefficient extraction and adaptive noise reduction method in recovery of weak bearing fault features from a multi-component signal mixture , 2013, Appl. Soft Comput..

[20]  Jérôme Antoni,et al.  Cyclostationary modelling of rotating machine vibration signals , 2004 .

[21]  Xiaohui Gu,et al.  Rolling element bearing faults diagnosis based on kurtogram and frequency domain correlated kurtosis , 2016 .

[22]  Pengcheng Jiang,et al.  Optimal Resonant Band Demodulation Based on an Improved Correlated Kurtosis and Its Application in Bearing Fault Diagnosis , 2017, Sensors.

[23]  Ardeshir Bahreininejad,et al.  Water cycle algorithm - A novel metaheuristic optimization method for solving constrained engineering optimization problems , 2012 .

[24]  Yonghao Miao,et al.  Improvement of kurtosis-guided-grams via Gini index for bearing fault feature identification , 2017 .

[25]  Do Guen Yoo,et al.  Water cycle algorithm: A detailed standard code , 2016, SoftwareX.

[26]  Dong Wang,et al.  Spectral L2 / L1 norm: A new perspective for spectral kurtosis for characterizing non-stationary signals , 2018 .

[27]  Wei He,et al.  Rolling element bearing fault detection based on optimal antisymmetric real Laplace wavelet , 2011 .

[28]  Robert B. Randall,et al.  THE RELATIONSHIP BETWEEN SPECTRAL CORRELATION AND ENVELOPE ANALYSIS IN THE DIAGNOSTICS OF BEARING FAULTS AND OTHER CYCLOSTATIONARY MACHINE SIGNALS , 2001 .

[29]  Changqing Shen,et al.  A novel adaptive wavelet stripping algorithm for extracting the transients caused by bearing localized faults , 2013 .

[30]  Robert B. Randall,et al.  The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines , 2006 .

[31]  P. D. McFadden,et al.  Vibration monitoring of rolling element bearings by the high-frequency resonance technique — a review , 1984 .

[32]  Yu Guo,et al.  Simultaneous faults identification of rolling element bearings and gears by combining kurtogram and independent component analysis , 2015 .