Enhanced thermoelectric properties of carbon fiber reinforced cement composites

Abstract Thermoelectric properties of carbon fiber reinforced cement composites (CFRCs) have attracted relevant interest in recent years, due to their fascinating ability for harvesting ambient energy in urban areas and roads, and to the widespread use of cement-based materials in modern society. The enhanced effect of the thin pyrolytic carbon layer (formed at the carbon fiber/cement interface) on transport and thermoelectric properties of CFRCs has been studied. It has been demonstrated that it can enhance the electrical conduction and Seebeck coefficient of CFRCs greatly, resulting in higher power factor 2.08 µW m −1  K −2 and higher thermoelectric figure of merit 3.11×10 −3 , compared to those reported in the literature and comparable to oxide thermoelectric materials. All CFRCs with pyrolytic carbon layer, exhibit typical semiconductor behavior with activation energy of electrical conduction of 0.228-0.407 eV together with a high Seebeck coefficient. The calculation through Mott’s formula indicates the charge carrier density of CFRCs (10 14 –10 16  cm −3 ) to be much smaller than that of typical thermoelectric materials and to increase with the carbon layer thickness. CFRCs thermal conductivity is dominated by phonon thermal conductivity, which is kept at a low level by high density of micro/nano-sized defects in the cement matrix that scatter phonons and shorten their mean free path. The appropriate carrier density and mobility induced by the amorphous structure of pyrolytic carbon is primarily responsible for the high thermoelectric figure of merit.

[1]  A. Grytsiv,et al.  n-Type skutterudites (R,Ba,Yb)yCo4Sb12 (R = Sr, La, Mm, DD, SrMm, SrDD) approaching ZT ≈ 2.0 , 2014 .

[2]  D.D.L. Chung,et al.  Enhancing the Seebeck effect in carbon fiber-reinforced cement by using intercalated carbon fibers , 2000 .

[3]  Hung-Ta Wang,et al.  Temperature dependent thermopower and electrical conductivity of Te nanowire/poly(3,4-ethylenedioxythiophene):poly(4-styrene sulfonate) microribbons , 2014 .

[4]  J. Michałowski,et al.  Thermal conductivity of 2D C–C composites with pyrolytic and glass-like carbon matrices , 2009 .

[5]  K. Yubuta,et al.  In-doped multifilled n-type skutterudites with ZT = 1.8 , 2015 .

[6]  Zhang Qian,et al.  Energy harvesting from solar irradiation in cities using the thermoelectric behavior of carbon fiber reinforced cement composites , 2014 .

[7]  W. Xu,et al.  Enhancement of thermoelectric performance in Cd-doped Ca3Co4O9via spin entropy, defect chemistry and phonon scattering , 2014 .

[8]  A. M. Brandt,et al.  Brittle matrix composites 10 , 1986 .

[9]  R. Donelson,et al.  Enhancement of thermoelectric properties in Sn doped (In0.95Lu0.05)2O3 , 2015 .

[10]  Amita Chandra,et al.  Graphene oxide/ferrofluid/cement composites for electromagnetic interference shielding application , 2011, Nanotechnology.

[11]  H. Kakemoto,et al.  Niobium(V) oxide with added silver as a thermoelectric material prepared by spark plasma sintering , 2015 .

[12]  S. Altın,et al.  Low temperature electrical and thermal transport properties of the Ca3−xSbxCo4O9 system , 2012, Journal of Materials Science: Materials in Electronics.

[13]  N. Banthia,et al.  A 3D percolation model for conductive fibrous composites: application in cement-based sensors , 2015, Journal of Materials Science.

[14]  F. Chou,et al.  Enhanced thermoelectric figure-of-merit ZT for hole-doped Bi2Sr2Co2Oy through Pb substitution , 2012 .

[15]  H. Goldsmid,et al.  Estimation of the thermal band gap of a semiconductor from seebeck measurements , 1999 .

[16]  H. Ohta,et al.  Thermoelectric properties of electron doped SrO(SrTiO3)n (n=1,2) ceramics , 2009 .

[17]  Lichao Feng,et al.  Applications of nanostructured carbon materials in constructions: the state of the art , 2015 .

[18]  D.D.L. Chung,et al.  Unprecedented vibration damping with high values of loss modulus and loss tangent, exhibited by cement–matrix graphite network composite , 2010 .

[19]  Kunihito Koumoto,et al.  Recent progress in oxide thermoelectric materials: p-type Ca3Co4O9 and n-type SrTiO3(-). , 2008, Inorganic chemistry.

[20]  W. Su,et al.  Effects of substituting La3+, Y3+ and Ce4+ for Ca2+ on the high temperature transport and thermoelectric properties of CaMnO3 , 2009 .

[21]  A. Klyndyuk,et al.  Synthesis, structure, and properties of Ca3Co3.85M0.15O9 + δ (M = Ti–Zn, Mo, W, Pb, Bi) layered thermoelectrics , 2015, Inorganic Materials.

[22]  M. Kanatzidis,et al.  New and old concepts in thermoelectric materials. , 2009, Angewandte Chemie.

[23]  Jian Wang,et al.  Graphene oxide-deposited carbon fiber/cement composites for electromagnetic interference shielding application , 2015 .

[24]  D. Chung Cement reinforced with short carbon fibers: a multifunctional material , 2000 .

[25]  Chunli Yang,et al.  Enhanced thermoelectric effect of carbon fiber reinforced cement composites by metallic oxide/cement interface , 2014 .

[26]  J. Goodenough,et al.  Effects of ball milling on microstructures and thermoelectric properties of higher manganese silicides , 2015 .

[27]  E. Bauer,et al.  Compositional dependence of the thermoelectric properties of (SrxBaxYb1 − 2x)yCo4Sb12 skutterudites , 2011, Journal of physics. Condensed matter : an Institute of Physics journal.

[28]  Peijie Sun,et al.  Large Seebeck effect by charge-mobility engineering , 2015, Nature communications.

[29]  T. Nabatame,et al.  Dopant selection for control of charge carrier density and mobility in amorphous indium oxide thin-film transistors: Comparison between Si- and W-dopants , 2015 .