Development of a Highly Sensitive Humidity Sensor Based on a Piezoelectric Micromachined Ultrasonic Transducer Array Functionalized with Graphene Oxide Thin Film

A novel relative humidity sensor that is based on a linear piezoelectric micromachined ultrasonic transducer (pMUT) array was proposed and microfabricated for high sensitivity, fast response, and good stability. The humidity-sensitive graphene oxide (GO) film was deposited on the pMUT array with a facile drop-casting method and characterized by scanning electron microscope (SEM), atomic force microscope (AFM), and Fourier transform infrared spectrum (FTIR). With the humidity level ranging from 10% to 90% RH, the sensor exhibited a high sensitivity of 719 Hz/% RH and an extremely high relative sensitivity of 271.1 ppm/% RH. The humidity-sensing results also showed good short-term repeatability and long-term stability, fast response and recovery, and low hysteresis. Moreover, the temperature coefficient of frequency (TCF) of the present humidity sensor was investigated and it could be easily compensated owing to the pMUT array structure design. This work confirmed that the GO functionalized pMUT is an excellent candidate in humidity detection and it may enable many potential applications, such as ultrasensitive mass detection and simultaneous detection of multiple parameters.

[1]  Dongzhi Zhang,et al.  High-performance QCM humidity sensor based on graphene oxide/tin oxide/polyaniline ternary nanocomposite prepared by in-situ oxidative polymerization method , 2018, Sensors and Actuators B: Chemical.

[2]  L. P. Eksperiandova,et al.  Recent trends of ceramic humidity sensors development: A review , 2016 .

[3]  Kwan Kyu Park,et al.  Mesoporous thin-film on highly-sensitive resonant chemical sensor for relative humidity and CO2 detection. , 2012, Analytical chemistry.

[4]  Lu Wang,et al.  Highly sensitive surface acoustic wave (SAW) humidity sensors based on sol–gel SiO2 films: Investigations on the sensing property and mechanism , 2015 .

[5]  Fei Wang,et al.  Modified graphene oxide/Nafion composite humidity sensor and its linear response to the relative humidity , 2017, 2017 IEEE SENSORS.

[6]  J. Tascón,et al.  Graphene oxide dispersions in organic solvents. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[7]  Senlin Jiang,et al.  Numerical Study and Optimisation of a Novel Single-Element Dual-Frequency Ultrasound Transducer , 2018, Sensors.

[8]  Yang Li,et al.  Polyaniline nanofiber humidity sensor prepared by electrospinning , 2012 .

[9]  Bin Ding,et al.  A highly sensitive humidity sensor based on a nanofibrous membrane coated quartz crystal microbalance , 2010, Nanotechnology.

[10]  Iole Venditti,et al.  Role of nanostructured polymers on the improvement of electrical response-based relative humidity sensors , 2016 .

[11]  Chengkuo Lee,et al.  Hybrid Metamaterial Absorber Platform for Sensing of CO2 Gas at Mid‐IR , 2018, Advanced science.

[12]  Yadong Jiang,et al.  Novel highly sensitive QCM humidity sensor with low hysteresis based on graphene oxide (GO)/poly(ethyleneimine) layered film , 2016 .

[13]  Mohd Nizar Hamidon,et al.  Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review , 2014, Sensors.

[14]  J. Xie,et al.  A high performance humidity sensor based on surface acoustic wave and graphene oxide on AlN/Si layered structure , 2018 .

[15]  Tomohiko Nakajima,et al.  Flexible humidity sensors composed of graphite-like carbon micro-pinecone arrays , 2016 .

[16]  R. K. Kotnala,et al.  Microstructure-dependent humidity sensitivity of porous MgFe2O4–CeO2 ceramic , 2007 .

[17]  Jani Kivioja,et al.  Ultrafast graphene oxide humidity sensors. , 2013, ACS nano.

[18]  Harith Ahmad,et al.  All-Optical Graphene Oxide Humidity Sensors , 2014, Sensors.

[19]  M. Roukes,et al.  Gas sensors based on gravimetric detection—A review , 2011 .

[20]  Dominique Baillargeat,et al.  Enhancement of humidity sensitivity of graphene through functionalization with polyethylenimine , 2015 .

[21]  Tara Betts.  Humidity , 1912, Buffalo medical journal.

[22]  Chao Gao,et al.  An improved sensitivity AlN microcantilever humidity sensor using interdigital transducers actuated very high resonant mode and graphene oxide sensing layer , 2018, 2018 IEEE Micro Electro Mechanical Systems (MEMS).

[23]  Marina Cole,et al.  A film bulk acoustic resonator oscillator based humidity sensor with graphene oxide as the sensitive layer , 2017 .

[24]  Ning Li,et al.  Fast-Response MoS2-Based Humidity Sensor Braced by SiO2 Microsphere Layers , 2018, IEEE Electron Device Letters.

[25]  Ning Li,et al.  Fast-Response MoS 2 -Based Humidity Sensor Braced by SiO 2 Microsphere Layers , 2018 .

[26]  Cunjiang Yu,et al.  Experiment and theoretical analysis of relative humidity sensor based on film bulk acoustic-wave resonator , 2010 .

[27]  Xiangdong Chen,et al.  Graphene oxide thin film coated quartz crystal microbalance for humidity detection , 2011 .

[28]  Zhaoxiong Xie,et al.  High-sensitivity humidity sensor based on a single SnO(2) nanowire. , 2007, Journal of the American Chemical Society.

[29]  M. Kolahdouz,et al.  Fabrication, modeling and simulation of high sensitivity capacitive humidity sensors based on ZnO nanorods , 2016 .

[30]  Lingling Wang,et al.  Electrospun CeO2 nanoparticles/PVP nanofibers based high-frequency surface acoustic wave humidity sensor , 2016 .

[31]  M. Dyson,et al.  Comparison of the effects of moist and dry conditions on dermal repair. , 1988, The Journal of investigative dermatology.

[32]  A. Stefani,et al.  Temperature insensitive hysteresis free highly sensitive polymer optical fiber Bragg grating humidity sensor. , 2016, Optics express.