Building Information Modelling for analysis of energy efficient industrial buildings – A case study

Industrial buildings demand higher amount of energy than other building typologies, thus powerful modelling and simulation tools for energy-optimisation and identification of synergies-potentials between the building envelope, building services and production systems are needed.

[1]  John Haymaker,et al.  ThermalOpt: A methodology for automated BIM-based multidisciplinary thermal simulation for use in optimization environments , 2011 .

[2]  K. Eisenhardt.  Building theories from case study research , 1989, STUDI ORGANIZZATIVI.

[3]  Jianping Zhang,et al.  STUDY ON BIM-BASED TECHNOLOGICAL SCHEME DESIGN SYSTEM , 2013 .

[4]  Iva Kovacic,et al.  The “BIM-sustain” experiment – simulation of BIM-supported multi-disciplinary design , 2013 .

[5]  Rizal Sebastian,et al.  Tool for Benchmarking BIM Performance of Design, Engineering and Construction Firms in The Netherlands , 2010 .

[6]  Charles M. Eastman,et al.  Building Information Modeling (BIM) and Safety: Automatic Safety Checking of Construction Models and Schedules , 2013 .

[7]  Jeff Haberl,et al.  A framework to integrate object-oriented physical modelling with building information modelling for building thermal simulation , 2016 .

[8]  Igor Mezic,et al.  Building energy modeling: A systematic approach to zoning and model reduction using Koopman Mode Analysis , 2015 .

[9]  Henrik Madsen,et al.  Fiction and reality in the modelling world – Balance between simplicity and complexity, calibration and identifiability, verification and falsification , 1999 .

[10]  Alexandra Cemesova,et al.  PassivBIM: Enhancing interoperability between BIM and low energy design software , 2015 .

[11]  Sylvain Robert,et al.  State of the art in building modelling and energy performances prediction: A review , 2013 .

[12]  Jin Wen,et al.  Review of building energy modeling for control and operation , 2014 .

[13]  Hyeun Jun Moon,et al.  CASE STUDIES FOR THE EVALUATION OF INTEROPERABILITY BETWEEN A BIM BASED ARCHITECTURAL MODEL AND BUILDING PERFORMANCE ANALYSIS PROGRAMS , 2011 .

[14]  R. Yin.  Yin, Robert K., Case Study Research: Design and Methods, 2nd ed. Newbury Park, CA: Sage, 1994. , 1994 .

[15]  Bhaskar Krishnamachari,et al.  A BIM centered indoor localization algorithm to support building fire emergency response operations , 2014 .

[16]  André Borrmann,et al.  Building information models as input for building energy performance simulation – the current state of industrial implementations , 2014 .

[17]  Gholamreza Heravi,et al.  Evaluation of sustainability indicators of industrial buildings focused on petrochemical projects , 2015 .

[18]  Max Henrion,et al.  Uncertainty: A Guide to Dealing with Uncertainty in Quantitative Risk and Policy Analysis , 1990 .

[19]  Gary J. Anderson,et al.  Fundamentals of Educational Research , 1998 .

[20]  Sylvain Robert,et al.  A standardized approach to BIM and energy simulation connection , 2015 .

[21]  Rokia Raslan,et al.  Investigation into informational compatibility of Building Information Modelling and Building Performance Analysis software solutions , 2015 .

[22]  Jeff Haberl,et al.  Developing a physical BIM library for building thermal energy simulation , 2015 .

[23]  Jeff Haberl,et al.  Building Information Modeling (BIM)-based daylighting simulation and analysis , 2014 .

[24]  Jan Hensen,et al.  Integrated building performance simulation: Progress, prospects and requirements , 2015 .

[25]  Salman Azhar,et al.  Building information modeling for sustainable design and LEED® rating analysis , 2011 .

[26]  Vladimir Bazjanac,et al.  Bim – Geometry Modeling Guidelines For Building Energy Performance Simulation , 2013, Building Simulation Conference Proceedings.

[27]  Iva Kovacic,et al.  Energy Efficient Production – Interdisciplinary, Systemic Approach through Integrated Simulation , 2013 .

[28]  Holger R. Maier,et al.  Future research challenges for incorporation of uncertainty in environmental and ecological decision-making , 2008 .

[29]  Rehan Sadiq,et al.  Improving the energy efficiency of the existing building stock: A critical review of commercial and institutional buildings , 2016 .

[30]  Pete Smith,et al.  BIM & the 5D Project Cost Manager , 2014 .

[31]  K. P. Lam,et al.  A comparative study of the IFC and gbXML informational infrastructures for data exchange in computational design support environments , 2007 .

[32]  Christophe Nicolle,et al.  A Thermal Simulation Tool for Building and Its Interoperability through the Building Information Modeling (BIM) Platform , 2013 .

[33]  Jim Steel,et al.  Model interoperability in building information modelling , 2009, Software & Systems Modeling.

[34]  Bhanu M. Marwaha,et al.  Review of energy efficiency initiatives and regulations for residential buildings in India , 2016 .

[35]  Willy Sher,et al.  An integrated approach to BIM competency assessment, acquisition and application , 2013 .

[36]  Mani Golparvar-Fard,et al.  Mapping actual thermal properties to building elements in gbXML-based BIM for reliable building energy performance modeling , 2015 .

[37]  Johnny Wong,et al.  Enhancing environmental sustainability over building life cycles through green BIM: A review , 2015 .

[38]  Arno Schlueter,et al.  Building information model based energy/exergy performance assessment in early design stages , 2009 .

[39]  Roland De Guio,et al.  Modelling and uncertainties in integrated energy planning , 2015 .

[40]  Mustafa Alshawi,et al.  Exploring how information exchanges can be enhanced through cloud BIM , 2012 .

[41]  Karen Kensek,et al.  Building Information Modeling: BIM in Current and Future Practice , 2014 .

[42]  Sylvain Robert,et al.  An approach to enhancing the connection between BIM models and building energy simulation – HVAC systems in the loop , 2014 .

[43]  Young Jin Kim,et al.  BIM interface for full vs. semi-automated building energy simulation , 2014 .

[44]  Eric M. Wetzel,et al.  The use of a BIM-based framework to support safe facility management processes , 2015 .

[45]  Young Sang Cho,et al.  Efficiency analysis of Set-based Design with structural building information modeling (S-BIM) on high-rise building structures , 2012 .

[46]  Charles M. Eastman,et al.  Building Product Models: Computer Environments, Supporting Design and Construction , 1999 .

[47]  Wei Yan,et al.  BPOpt: A framework for BIM-based performance optimization , 2015 .

[48]  Allan D. Chasey,et al.  Information exchange requirements for capital equipment and facility infrastructure for semiconductor facilities , 2012 .

[49]  Iva Kovacic,et al.  Co-simulation environment for optimizing energy efficiency in production systems , 2014 .

[50]  Bilal Succar,et al.  Building information modelling framework: A research and delivery foundation for industry stakeholders , 2009 .

[51]  Adrian Badea,et al.  The historical evolution of the energy efficient buildings , 2015 .

[52]  R. Yin.  Case Study Research: Design and Methods , 1984 .

[53]  Magdy M. Ibrahim,et al.  A WEB-BASED APPROACH TO TRANSFERRING ARCHITECTURAL INFORMATION TO THE CONSTRUCTION SITE BASED ON THE BIM OBJECT CONCEPT. , 2004 .

[54]  Henrik Linderoth,et al.  Understanding adoption and use of BIM as the creation of actor networks , 2010 .

[55]  James O'Donnell,et al.  Transforming BIM to BEM: Generation of Building Geometry for the NASA Ames Sustainability Base BIM , 2013 .

[56]  Amaryllis Audenaert,et al.  Improving the energy performance of residential buildings: A literature review , 2015 .

[57]  Thomas Froese,et al.  PRACTICE NOTE Building information modelling demystified: does it make business sense to adopt BIM? , 2009, ICIT 2008.

[58]  Robert Eadie,et al.  BIM implementation throughout the UK construction project lifecycle: An analysis , 2013 .

[59]  Jan Karlshøj,et al.  Review of the Development andImplementation of IFC compatible BIM , 2008 .

[60]  Hannu Penttilä,et al.  Describing the changes in architectural information technology to understand design complexity and free-form architectural expression , 2006, J. Inf. Technol. Constr..

[61]  Pieter de Wilde,et al.  The gap between predicted and measured energy performance of buildings: A framework for investigation , 2014 .

[62]  Vladimir Bazjanac,et al.  Reduction, simplification, translation and interpretation in the exchange of model data , 2007 .

[63]  Martin Fischer,et al.  The product model and Fourth Dimension project , 2003, J. Inf. Technol. Constr..