Research on the Method of Reducing Dynamic Cutting Force in Aspheric Machining
暂无分享,去创建一个
[1] Deyuan Zhang,et al. Influence of dynamic angles and cutting strain on chip morphology and cutting forces during titanium alloy Ti-6Al-4 V vibration-assisted drilling , 2021 .
[2] Huaizhong Li,et al. Modelling and experimental analysis of the effects of run out, minimum chip thickness and elastic recovery on the cutting force in micro-end-milling , 2020 .
[3] H. Sasahara,et al. Determining the effect of tool posture on cutting force in a turn milling process using an analytical prediction model , 2020 .
[4] B. Powałka,et al. Prediction of cutting forces during micro end milling considering chip thickness accumulation , 2019 .
[5] Harry Otalora-Ortega,et al. Analytical modeling of the uncut chip geometry to predict cutting forces in orthogonal centric turn-milling operations , 2019, International Journal of Machine Tools and Manufacture.
[6] A. Kumar,et al. Variation of surface generation mechanisms in ultra-precision machining due to relative tool sharpness (RTS) and material properties , 2017 .
[7] Zhou Xiaoqin,et al. Study on predictive model of cutting force and geometry parameters for oblique elliptical vibration cutting , 2016 .
[8] Wanshan Wang,et al. Cutting forces in micro-end-milling processes , 2016 .
[9] Chao Lin,et al. Determining issues in optimal turning of micro-structured functional surfaces , 2015 .
[10] Le Song,et al. Spiral tool path generation for diamond turning optical freeform surfaces of quasi-revolution , 2015, Comput. Aided Des..
[11] Suet To,et al. Finite element modelling of shear angle and cutting force variation induced by material anisotropy in ultra-precision diamond turning , 2013 .
[12] Suet To,et al. Investigation on the influence of tool-tip vibration on surface roughness and its representative measurement in ultra-precision diamond turning , 2013 .
[13] Chi Fai Cheung,et al. Dynamic modelling of shear band formation and tool-tip vibration in ultra-precision diamond turning , 2011 .
[14] Chi Fai Cheung,et al. A study of regularly spaced shear bands and morphology of serrated chip formation in microcutting process , 2010 .
[15] Eiji Usui,et al. Predictive cutting force model in complex-shaped end milling based on minimum cutting energy , 2010 .
[16] Chi Fai Cheung,et al. A theoretical and experimental investigation of the tool-tip vibration and its influence upon surface generation in single-point diamond turning , 2010 .
[17] N. K. Chandiramani,et al. Dynamics of 2-dof regenerative chatter during turning , 2006 .
[18] Tuğrul Özel,et al. A Methodology to Determine Work Material Flow Stress and Tool-Chip Interfacial Friction Properties by Using Analysis of Machining , 2006 .
[19] Chi Fai Cheung,et al. A Microplasticity Analysis of Micro-Cutting Force Variation in Ultra-Precision Diamond Turning , 2002 .
[20] S. To,et al. Anisotropy of surface roughness in diamond turning of brittle single crystals , 2002 .
[21] Chi Fai Cheung,et al. Effect of crystallographic orientation in diamond turning of copper single crystals , 2000 .
[22] P. Oxley. DEVELOPMENT AND APPLICATION OF A PREDICTIVE MACHINING THEORY , 1998 .
[23] Wing Bun Lee,et al. A theoretical analysis of the effect of crystallographic orientation on chip formation in micromachining , 1993 .
[24] Bikash Chandra Behera,et al. Modeling of cutting force in MQL machining environment considering chip tool contact friction , 2018 .
[25] Tianbiao Yu,et al. In-process stochastic tool wear identification and its application to the improved cutting force modeling of micro milling , 2022 .