Zaawansowane metody analizy sygnałów w diagnostyce stanu narzędzia

[1]  Jacek Wilkowski,et al.  The acoustic noise signal as an indirect source of information about the tool wear during the milling of chipboard and MDF , 2005 .

[2]  Sounak Kumar Choudhury,et al.  Tool wear measurement in turning using force ratio , 2000 .

[3]  Surjya K. Pal,et al.  Artificial neural network based prediction of drill flank wear from motor current signals , 2007, Appl. Soft Comput..

[4]  Qiang Liu,et al.  On-line monitoring of flank wear in turning with multilayered feed-forward neural network , 1999 .

[5]  Fritz Klocke,et al.  Development of a tool wear-monitoring system for hard turning , 2003 .

[6]  Pawel Lezanski,et al.  An intelligent system for grinding wheel condition monitoring , 2001 .

[7]  Nidal Abu-Zahra,et al.  Gradual wear monitoring of turning inserts using wavelet analysis of ultrasound waves , 2003 .

[8]  Rui Silva,et al.  THE ADAPTABILITY OF A TOOL WEAR MONITORING SYSTEM UNDER CHANGING CUTTING CONDITIONS , 2000 .

[9]  Ren Jie Kuo,et al.  Multi-sensor integration for on-line tool wear estimation through artificial neural networks and fuz , 2000 .

[10]  P. S. Heyns,et al.  WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTS , 2001 .

[11]  Issam Abu-Mahfouz.  Drill flank wear estimation using supervised vector quantization neural networks , 2004, Neural Computing & Applications.

[12]  Jack Jeswiet,et al.  Real time implementation of on-line tool condition monitoring in turning , 1999 .

[13]  J. H. Lee,et al.  One-step-ahead prediction of flank wear using cutting force , 1999 .

[14]  Shantanu Sharma,et al.  An approach for condition monitoring of a turning tool , 2007 .

[15]  Krzysztof Jemielniak,et al.  TOOL WEAR MONITORING BASED ON WAVELET TRANSFORM OF RAW ACOUSTIC EMISSION SIGNAL , 2010 .

[16]  Tomasz Urbański,et al.  Tool condition monitoring based on numerous signal features , 2012 .

[17]  D. E. Dimla,et al.  On-line metal cutting tool condition monitoring.: I: force and vibration analyses , 2000 .

[18]  Krzysztof Jemielniak,et al.  Multi-feature Fusion Based Tool Condition Monitoring in Rough Turning of Inconel 625 , 2010 .

[19]  Samy E. Oraby,et al.  Tool life determination based on the measurement of wear and tool force ratio variation , 2004 .

[20]  Surjya K. Pal,et al.  Drill wear monitoring using back propagation neural network , 2006 .

[21]  Ranga Komanduri,et al.  Frequency and time domain analyses of sensor signals in drilling. I: Correlation with drill wear , 1995 .

[22]  Vijay K. Jain,et al.  On-line monitoring of tool wear in turning using a neural network , 1999 .

[23]  Jan-Eric Ståhl,et al.  The monitoring of flank wear on the CBN tool in the hard turning process , 2003 .