Real-time risk of ship structures integrating structural health monitoring data: Application to multi-objective optimal ship routing

The aim of this paper is to develop a risk-informed approach for ship structures that integrates structural health monitoring (SHM) information. As an application, real-time optimal short range routing of ships is presented. Risk is based on the reliability analysis of the midship section of a hull and on its associated failure consequences. Different damage levels, accounting for the propagation of plastification throughout the hull section, are considered. Ship age is also investigated by including the effects of corrosion. SHM data, integrated within the developed decision support tool, provides useful information to be used during the real-time decision process. A novel closed-form solution for short term statistics based on Rayleigh prior distribution and a simulation-based technique are proposed for Bayesian updating. Finally, optimal short range routing of ships is accomplished by solving two- and three-objective optimization problems, in which the objectives to be minimized are the estimated time of arrival, mean total risk, and fuel cost, given sea weather maps and origin and destination points. Weather forecast, associated with different time frames, is also included within the developed framework. The solutions are obtained in the form of Pareto-optimal sets. The proposed approach is illustrated on a Joint High-Speed Sealift.

[1]  M. Tsou Integration of a Geographic Information System and Evolutionary Computation for Automatic Routing in Coastal Navigation , 2010, Journal of Navigation.

[2]  Rolf Skjong,et al.  COST EFFECTIVENESS OF HULL GIRDER SAFETY , 2002 .

[3]  Dan M. Frangopol,et al.  Reliability and redundancy assessment of ships under different operational conditions , 2012 .

[4]  Dan M. Frangopol,et al.  Time-Variant Redundancy of Ship Structures , 2011 .

[5]  Dan M. Frangopol,et al.  Probabilistic ship collision risk and sustainability assessment considering risk attitudes , 2015 .

[6]  Optimal Short-Range Routing of Vessels in a Seaway , 2009 .

[7]  Apostolos Papanikolaou,et al.  Optimization of routing considering uncertainties , 2012 .

[8]  C. Guedes Soares,et al.  Structural reliability of two bulk carrier designs , 2000 .

[9]  C. Guedes Soares,et al.  Reliability and residual strength of double hull tankers designed according to the new IACS common structural rules , 2009 .

[10]  Christian P. Robert,et al.  The Bayesian choice , 1994 .

[11]  Rolf Skjong,et al.  Risk Acceptance Criteria: current proposals and IMO position , 2002 .

[12]  Winnifred R. Jacobs,et al.  PITCHING AND HEAVING MOTIONS OF A SHIP IN REGULAR WAVES , 1957 .

[13]  Wilson H. Tang,et al.  Probability Concepts in Engineering: Emphasis on Applications to Civil and Environmental Engineering , 2006 .

[14]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[15]  Dan M. Frangopol Integrated Life-Cycle Framework for Maintenance, Monitoring and Reliability of Naval Ship Structures , 2010 .

[16]  Stuart G. Coles,et al.  Bayesian methods in extreme value modelling: a review and new developments. , 1996 .

[17]  Jeom Kee Paik,et al.  Ship hull ultimate strength reliability considering corrosion , 1998 .

[18]  C. Guedes Soares,et al.  Interaction Equation for the Collapse of Tankers and Containerships Under Combined Bending Moments , 1997 .

[19]  Günther Clauss,et al.  Robust Pareto-optimum routing of ships utilising deterministic and ensemble weather forecasts , 2010 .

[20]  Dan M. Frangopol,et al.  Risk-informed optimal routing of ships considering different damage scenarios and operational conditions , 2013, Reliab. Eng. Syst. Saf..

[21]  Paul E. Hess,et al.  Hybrid Reliability Predictions of Single and Advanced Double-Hull Ship Structures , 2003 .

[22]  Aristides Miroyannis Estimation of ship construction costs , 2006 .

[23]  Dan M. Frangopol,et al.  Efficient Method Based on Optimization and Simulation for the Probabilistic Strength Computation of the Ship Hull , 2010 .

[24]  Gerald G. Brown,et al.  Scheduling ocean transportation of crude oil , 1987 .

[25]  Inge Norstad,et al.  Reducing fuel emissions by optimizing speed on shipping routes , 2010, J. Oper. Res. Soc..

[26]  S. J. Bijlsma,et al.  Minimal Time Route Computation for Ships with Pre-Specified Voyage Fuel Consumption , 2008, Journal of Navigation.

[27]  Roman Smierzchalski,et al.  Multicriteria Optimisation in Weather Routing , 2009 .

[28]  Odd M. Faltinsen,et al.  Sea loads on ships and offshore structures , 1990 .

[29]  Bilal M. Ayyub,et al.  Risk assessment of aging ship hull structures in the presence of corrosion and fatigue , 2002 .

[30]  Dan M. Frangopol,et al.  Integration of structural health monitoring in life-cycle performance assessment of ship structures under uncertainty , 2010 .

[31]  Jeom Kee Paik,et al.  Ship structural safety and reliability , 2001 .

[32]  David B. Dunson,et al.  Bayesian Data Analysis , 2010 .

[33]  S. J. Bijlsma Optimal ship routing with ocean current included , 2010 .

[34]  Owen F. Hughes,et al.  Ship Structural Design: A Rationally-based, Computer-aided, Optimization Approach , 1983 .

[35]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[36]  Hideki Hagiwara Weather routing of (sail-assisted) motor vessels , 1989 .

[37]  Guan-Yu Chen,et al.  Ship Routing Utilizing Strong Ocean Currents , 2013, Journal of Navigation.

[38]  Y. N. Chen,et al.  Implementation of reliability methods to marine structures , 1984 .

[39]  Apostolos Papanikolaou,et al.  Optimization of routing with uncertainties , 2011 .

[40]  Kalyanmoy Deb,et al.  Multi-objective optimization using evolutionary algorithms , 2001, Wiley-Interscience series in systems and optimization.

[41]  Steven Kay,et al.  Fundamentals Of Statistical Signal Processing , 2001 .

[42]  Dan M. Frangopol,et al.  RELSYS: A computer program for structural system reliability , 1998 .

[43]  Daniel Fink A Compendium of Conjugate Priors , 1997 .

[44]  Radford M. Neal Slice Sampling , 2003, The Annals of Statistics.

[45]  Bilal M. Ayyub,et al.  Reliability‐Based Load and Resistance Factor Design (LRFD) of Hull Girders for Surface Ships , 2000 .

[46]  C. Bucher,et al.  A fast and efficient response surface approach for structural reliability problems , 1990 .