Comparison Between Micro Machining of Additively Manufactured and Conventionally Formed Samples of Ti6Al4V Alloy

[1]  S. Giliani,et al.  Selective Laser Melting and Electron Beam Melting of Ti6Al4V for Orthopedic Applications: A Comparative Study on the Applied Building Direction , 2020, Materials.

[2]  T. Özel,et al.  Analytical force modelling for micro milling additively fabricated Inconel 625 , 2020, Production Engineering.

[3]  E. Schindelholz,et al.  How build angle and post-processing impact roughness and corrosion of additively manufactured 316L stainless steel , 2020, npj Materials Degradation.

[4]  T. Woodfield,et al.  Rational design, bio-functionalization and biological performance of hybrid additive manufactured titanium implants for orthopaedic applications: A review. , 2020, Journal of the mechanical behavior of biomedical materials.

[5]  A. du Plessis,et al.  Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights , 2020 .

[6]  Andrea Abeni,et al.  Micro-milling of Selective Laser Melted Stainless Steel , 2020 .

[7]  Elisabetta Ceretti,et al.  Post Processing of 3D Printed Metal Scaffolds: a Preliminary Study of Antimicrobial Efficiency , 2020 .

[8]  Aldo Attanasio,et al.  An Experimental Study on Micro-Milling of a Medical Grade Co-Cr-Mo Alloy Produced by Selective Laser Melting , 2019, Materials.

[9]  Paul J. Scott,et al.  Characterisation methods for powder bed fusion processed surface topography , 2019, Precision Engineering.

[10]  Karali Patra,et al.  Mechanistic modeling of cutting forces in micro-end-milling considering tool run out, minimum chip thickness and tooth overlapping effects , 2018, Machining Science and Technology.

[11]  T. Özel,et al.  Finite element simulation of high speed micro milling in the presence of tool run-out with experimental validations , 2018, The International Journal of Advanced Manufacturing Technology.

[12]  P. Bai,et al.  The Heat Treatment Influence on the Microstructure and Hardness of TC4 Titanium Alloy Manufactured via Selective Laser Melting , 2018, Materials.

[13]  P. Peyre,et al.  Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts , 2017 .

[14]  Aldo Attanasio,et al.  Tool Run-Out Measurement in Micro Milling , 2017, Micromachines.

[15]  Enrico Filippi,et al.  Dynamic simulation of milling operations with small diameter milling cutters: effect of material heterogeneity on the cutting force model , 2017 .

[16]  N. Qiao,et al.  Corrosion resistance characteristics of a Ti-6Al-4V alloy scaffold that is fabricated by electron beam melting and selective laser melting for implantation in vivo. , 2017, Materials science & engineering. C, Materials for biological applications.

[17]  R. Hague,et al.  Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications. , 2016, Materials science & engineering. C, Materials for biological applications.

[18]  Wanshan Wang,et al.  Cutting forces in micro-end-milling processes , 2016 .

[19]  Changkui Liu,et al.  A Comparison of Biocompatibility of a Titanium Alloy Fabricated by Electron Beam Melting and Selective Laser Melting , 2016, PloS one.

[20]  M. Gelfi,et al.  Micromilling of Lamellar Ti6Al4V: Cutting Force Analysis , 2016 .

[21]  B. Stucker,et al.  Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting , 2013, Journal of Materials Engineering and Performance.

[22]  Martin B.G. Jun,et al.  Modeling of minimum uncut chip thickness in micro machining of aluminum , 2012 .

[23]  Sara M. Gaytan,et al.  Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies—Electron Beam Melting and Laser Beam Melting , 2011, Materials.

[24]  Chengfeng Li,et al.  Modelling and analysis of micro scale milling considering size effect, micro cutter edge radius and minimum chip thickness , 2008 .