Statistical analysis of ductile fracture properties of an aluminum casting

Abstract This paper presents a statistical study on plasticity and fracture properties of a ductile aluminum casting. Thirty conventional tensile tests on round bars and 30 shear fracture tests on butterfly-like flat specimens are conducted. The load–displacement curves obtained vary within 5% of the average response and thus plasticity behaviors can be represented by one single true stress–strain curve. However, the distribution of fracture strain has to be described in a probabilistic way. The test data are fitted well with the normal and the Weibull probability function and no major differences can be discerned between them. The shear fracture strains spread in a narrower range than the tensile ones, which is consistent with the fact that the casting is of much higher ductility under shear than under tension. The fractographic study reveals that the present round bar specimens can be generally categorized into two groups in terms of the size of pores. This requires two separate probability functions to describe their respective distributions. By treating all of the tensile fracture strains as one single population, the normal probability distribution predicts an unrealistic, negative value at the probability of 0.01%.

[1]  D. J. Neville.  Statistical analysis of fracture toughness data , 1987 .

[2]  Mark F. Horstemeyer,et al.  Numerical, experimental, nondestructive, and image analyses of damage; progression in cast A356 aluminium notch tensile bars , 2013 .

[3]  A. Gokhale,et al.  Effect of loading condition and stress state on damage evolution of silicon particles in an Al-Si-Mg-Base cast alloy , 2002 .

[4]  Arun M. Gokhale,et al.  Origins of variability in the fracture-related mechanical properties of a tilt-pour-permanent-mold cast Al-alloy , 2005 .

[5]  J. Griffiths,et al.  Damage by eutectic particle cracking in aluminum casting alloys A356/357 , 2003 .

[6]  T. Wierzbicki,et al.  Effects of Mold Media and Porosity on Ductile Fracture Properties of Cast Aluminum Alloy A356 , 2008 .

[7]  J. Beuth,et al.  Use of weibull statistics to quantify property variability in TiAl alloys , 2002 .

[8]  A. Gokhale,et al.  Quantitative characterization of three-dimensional damage evolution in a wrought Al-alloy under tension and compression , 2002 .

[9]  J. F. Knott,et al.  Statistical distributions of toughness and fracture stress for homogeneous and inhomogeneous materials , 1986 .

[10]  J. T. Staley,et al.  The effect of increased HIP temperatures on bifilms and tensile properties of A206-T71 aluminum castings , 2007 .

[11]  Yuanli Bai,et al.  Calibration of ductile fracture properties of a cast aluminum alloy , 2007 .

[12]  M. Mahmoudi,et al.  Effect of casting techniques on tensile properties of cast aluminium alloy (Al–Si–Mg) and TiB2 containing metal matrix composite , 2003 .

[13]  D. Blagoeva,et al.  Tensile, Compression and Fracture Properties of Thick-Walled Ductile Cast Iron Components , 2007, Journal of Materials Engineering and Performance.

[14]  A. Gokhale,et al.  Quantitative fractographic analysis of variability in tensile ductility of a squeeze cast Al–Si–Mg base alloy , 2005 .

[15]  T. Wierzbicki,et al.  Comparison of ductile fracture properties of aluminum castings : Sand mold vs. metal mold , 2008 .

[16]  D. Mohr,et al.  A New Experimental Technique for the Multi-axial Testing of Advanced High Strength Steel Sheets , 2008 .

[17]  J. Francis,et al.  The role of defects in the fracture of an Al–Si–Mg cast alloy , 2005 .

[18]  D. M. Tracey,et al.  On the ductile enlargement of voids in triaxial stress fields , 1969 .

[19]  Dirk Mohr,et al.  Onset of fracture in high pressure die casting aluminum alloys , 2008 .

[20]  J. Knott,et al.  The statistical modelling of brittle fracture in homogeneous and heterogeneous steel microstructures , 2000 .

[21]  D. Blagoeva,et al.  An Experimental and Numerical Analysis to Correlate Variation in Ductility to Defects and Microstructure in Ductile Cast Iron Components , 2006 .

[22]  J. Knott.  Micromechanical models and the statistical analysis of fracture and fracture toughness , 2002 .

[23]  John L. Campbell,et al.  Statistical distributions of fracture strengths of cast Al7SiMg alloy , 1993 .

[24]  T. Wierzbicki,et al.  On fracture locus in the equivalent strain and stress triaxiality space , 2004 .

[25]  T. Wierzbicki,et al.  A new model of metal plasticity and fracture with pressure and Lode dependence , 2008 .

[26]  A. Gokhale,et al.  Three-dimensional particle cracking damage development in an Al–Mg-base wrought alloy , 2003 .