Prediction of the Rock Mass Diggability Index by Using Fuzzy Clustering-Based, ANN and Multiple Regression Methods

Rock mass classification systems are one of the most common ways of determining rock mass excavatability and related equipment assessment. However, the strength and weak points of such rating-based classifications have always been questionable. Such classification systems assign quantifiable values to predefined classified geotechnical parameters of rock mass. This causes particular ambiguities, leading to the misuse of such classifications in practical applications. Recently, intelligence system approaches such as artificial neural networks (ANNs) and neuro-fuzzy methods, along with multiple regression models, have been used successfully to overcome such uncertainties. The purpose of the present study is the construction of several models by using an adaptive neuro-fuzzy inference system (ANFIS) method with two data clustering approaches, including fuzzy c-means (FCM) clustering and subtractive clustering, an ANN and non-linear multiple regression to estimate the basic rock mass diggability index. A set of data from several case studies was used to obtain the real rock mass diggability index and compared to the predicted values by the constructed models. In conclusion, it was observed that ANFIS based on the FCM model shows higher accuracy and correlation with actual data compared to that of the ANN and multiple regression. As a result, one can use the assimilation of ANNs with fuzzy clustering-based models to construct such rigorous predictor tools.

[1]  L. Jain,et al.  Fuzzy sets and their application to clustering and training , 2000 .

[2]  M. Iphar,et al.  An application of fuzzy sets to the Diggability Index Rating Method for surface mine equipment selection , 2006 .

[3]  Byung-Sik Chun,et al.  Indirect estimation of the rock deformation modulus based on polynomial and multiple regression analyses of the RMR system , 2009 .

[4]  F. Dominic,et al.  Mechanical rock excavation; assessment of cuttability and borability , 1987 .

[5]  Candan Gokceoglu,et al.  A fuzzy model to predict the uniaxial compressive strength and the modulus of elasticity of a problematic rock , 2004, Eng. Appl. Artif. Intell..

[6]  Wen-Xiu Li,et al.  Fuzzy models for analysis of rock mass displacements due to underground mining in mountainous areas , 2006 .

[7]  Candan Gokceoglu,et al.  Draft ISRM suggested method for determining block punch strength index (BPI) , 2001 .

[8]  R. M. Goktan,et al.  Prediction of ripping machine performance in terms of rockmass properties : : technical paper , 1991 .

[9]  James C. Bezdek,et al.  Pattern Recognition with Fuzzy Objective Function Algorithms , 1981, Advanced Applications in Pattern Recognition.

[10]  Candan Gokceoglu,et al.  Application of fuzzy inference system and nonlinear regression models for predicting rock brittleness , 2010, Expert Syst. Appl..

[11]  Z. Bieniawski Engineering rock mass classifications , 1989 .

[12]  Simon Haykin,et al.  Neural Networks: A Comprehensive Foundation , 1998 .

[13]  James L. McClelland,et al.  Parallel distributed processing: explorations in the microstructure of cognition, vol. 1: foundations , 1986 .

[14]  Hossein Nezamabadi-pour,et al.  Application of the adaptive neuro-fuzzy inference system for prediction of a rock engineering classification system , 2011 .

[15]  H.A.D. Kirsten,et al.  A classification system for excavation in natural materials , 1982 .

[16]  Robert Babuška,et al.  Fuzzy model for the prediction of unconfined compressive strength of rock samples , 1999 .

[17]  Jyh-Shing Roger Jang,et al.  ANFIS: adaptive-network-based fuzzy inference system , 1993, IEEE Trans. Syst. Man Cybern..

[18]  A. E. Tercan,et al.  Spatial estimation of some mechanical properties of rocks by fuzzy modelling , 2007 .

[19]  Stephen L. Chiu,et al.  Fuzzy Model Identification Based on Cluster Estimation , 1994, J. Intell. Fuzzy Syst..

[20]  M. J. Scoble,et al.  Derivation of a diggability index for surface mine equipment selection , 1984 .

[21]  Morteza Beiki,et al.  Estimation of deformation modulus of rock masses by using fuzzy clustering-based modeling , 2011 .

[22]  Nikola Kasabov,et al.  Foundations Of Neural Networks, Fuzzy Systems, And Knowledge Engineering [Books in Brief] , 1996, IEEE Transactions on Neural Networks.

[23]  Jian Zhao,et al.  Development of a rock mass characteristics model for TBM penetration rate prediction , 2009 .

[24]  Michio Sugeno,et al.  Fuzzy identification of systems and its applications to modeling and control , 1985, IEEE Transactions on Systems, Man, and Cybernetics.

[25]  Candan Gokceoglu,et al.  An application of fuzzy sets to the Geological Strength Index (GSI) system used in rock engineering , 2003 .

[26]  Dimitar Filev,et al.  Generation of Fuzzy Rules by Mountain Clustering , 1994, J. Intell. Fuzzy Syst..

[27]  C. Gokceoğlu,et al.  Models to predict the uniaxial compressive strength and the modulus of elasticity for Ankara Agglomerate , 2004 .

[28]  Melih Iphar,et al.  ANN and ANFIS performance prediction models for hydraulic impact hammers , 2012 .

[29]  R. M. Goktan,et al.  Prediction of radial bit cutting force in high-strength rocks using multiple linear regression analysis , 2007 .

[30]  Candan Gokceoglu,et al.  A neuro-fuzzy model for modulus of deformation of jointed rock masses , 2004 .

[31]  Martin K. Purvis,et al.  A Membership Function Selection Method for Fuzzy Neural Networks , 1997, ICONIP.

[32]  C. H. Juang,et al.  Stability analysis of existing slopes considering uncertainty , 1998 .

[33]  M. S. Rosenbaum Neuro-fuzzy modeling in engineering geology , 2001, Quarterly Journal of Engineering Geology and Hydrogeology.

[34]  J. C. Dunn,et al.  A Fuzzy Relative of the ISODATA Process and Its Use in Detecting Compact Well-Separated Clusters , 1973 .

[35]  E. T. Brown,et al.  Rock characterization testing and monitoring , 1981 .

[36]  E. T. Brown Rock characterization, testing & monitoring: ISRM suggested methods , 1981 .