Metal- based eggshell particles prepared via successive incipient wetness impregnation method as a promoted sorbent for CO2 capturing in the calcium looping process

[1]  D. Peyerl,et al.  DEPLOYNG OF THE CARBON CAPTURE TECHNOLOGIES FOR CO2 EMISSION MITIGATION IN THE INDUSTRIAL SECTORS , 2023, Carbon Capture Science & Technology.

[2]  Weibin Liang,et al.  Ni-doped Metal-Azolate Framework-6 derived carbon as a highly active catalyst for CO2 conversion through the CO2 hydrogenation reaction , 2023, Carbon Capture Science & Technology.

[3]  A. A. El-Fattah,et al.  Carbon Capture Materials in Post-Combustion: Adsorption and Absorption-Based Processes , 2023, C.

[4]  P. Llewellyn,et al.  Metal-Organic Framework Hybrid Adsorbents for Carbon Capture – A Review , 2023, Journal of Environmental Chemical Engineering.

[5]  P. Clough,et al.  Highly robust Zr-stabilized CaO nanoadsorbent developed by a facile one-pot MWCNT-assistance method for CO2 capture under realistic calcium looping conditions , 2022, Journal of Cleaner Production.

[6]  P. Clough,et al.  The novel Carbon Nanotube-assisted development of highly porous CaZrO3-CaO xerogel with boosted sorption activity towards high-temperature cyclic CO2 capture , 2022, Energy Conversion and Management.

[7]  Pedro Enrique Sánchez-Jiménez,et al.  A novel, green, cost-effective and fluidizable SiO2-decorated calcium-based adsorbent recovered from eggshell waste for the CO2 capture process , 2022, Separation and Purification Technology.

[8]  J. Valverde,et al.  Improvement in cyclic CO2 capture performance and fluidization behavior of eggshell-derived CaCO3 particles modified with acetic acid used in calcium looping process , 2022, Journal of CO2 Utilization.

[9]  C. Pevida,et al.  The novel SiO2-decorated highly robust waste-derived activated carbon with homogeneous fluidity for the CO2 capture process , 2022, Separation and Purification Technology.

[10]  Yaping Xia,et al.  CO2 capture performance of biochar prepared from sewage sludge after conditioning with different dewatering agents , 2022, Journal of Environmental Chemical Engineering.

[11]  Yongqing Xu,et al.  Recent Progress in Integrated CO2 Capture and Conversion Process Using Dual Function Materials: A State-of-the-Art Review , 2022, Carbon Capture Science & Technology.

[12]  S. Jang,et al.  Ca2CuO3: A high temperature CO2 sorbent with rapid regeneration kinetics , 2022, Journal of Environmental Chemical Engineering.

[13]  Songgeng Li,et al.  Influence of additives on CaCO3 precursors and multicycle CO2 capture performance of CaO sorbents , 2022, Journal of Environmental Chemical Engineering.

[14]  T. Reina,et al.  Recent advances in carbon dioxide capture for process intensification , 2022, Carbon Capture Science & Technology.

[15]  Jiang Wu,et al.  Preparation of CeO2/CaO with Anti-sintering for Efficient Capture of As2O3 from Flue Gas at a High Temperature , 2021, Energy & Fuels.

[16]  Rakesh Kumar,et al.  CO2 Capture from Flue Gas using Phosphonium based Deep Eutectic Solvents: Modelling and Simulation Approach , 2021, Journal of Environmental Chemical Engineering.

[17]  Yongqing Xu,et al.  Study on the effect of NaBr modification on CaO-based sorbent for CO2 capture and SO2 capture , 2021, Carbon Capture Science & Technology.

[18]  C. Pevida,et al.  CO2 capture activity of a novel CaO adsorbent stabilized with (ZrO2+Al2O3+CeO2)-based additive under mild and realistic calcium looping conditions , 2021, Journal of CO2 Utilization.

[19]  A. Mohamed,et al.  Recent advances in developing engineered biochar for CO2 capture: An insight into the biochar modification approaches , 2021, Journal of Environmental Chemical Engineering.

[20]  Y. Geng,et al.  Research progress of calcium-based adsorbents for CO2 capture and anti-sintering modification , 2021, Journal of Fuel Chemistry and Technology.

[21]  J. Valverde,et al.  Modelling of a fluidized bed carbonator reactor for post-combustion CO2 capture considering bed hydrodynamics and sorbent characteristics , 2021 .

[22]  Majid Ali,et al.  Enhanced CO2 capture using organic acid structure modified waste eggshell derived CaO sorbent , 2021 .

[23]  A. Lemonidou,et al.  CO2 capture and fluidity performance of CaO-based sorbents: Effect of Zr, Al and Ce additives in tri-, bi- and mono-metallic configurations , 2020 .

[24]  S. Soltani,et al.  Influence of surface modification on selective CO2 adsorption: A technical review on mechanisms and methods , 2020 .

[25]  R. Xiao,et al.  Kinetic analysis about the CO2 capture capacity of lime mud from paper mill in calcium looping process , 2020, Energy Science & Engineering.

[26]  M. Gutterres,et al.  CO2 adsorption using solids with different surface and acid-base properties , 2020 .

[27]  Soojin Park,et al.  MnO2-decorated biochar composites of coconut shell and rice husk: An efficient lithium ions adsorption-desorption performance in aqueous media. , 2020, Chemosphere.

[28]  Jun Dong,et al.  Effect of steam addition during carbonation, calcination or hydration on re-activation of CaO sorbent for CO2 capture , 2020 .

[29]  R. Chacartegui,et al.  Calcium-Looping Performance of Biomineralized CaCO3 for CO2 Capture and Thermochemical Energy Storage , 2020 .

[30]  Saeed Zeinali Heris,et al.  Experimental comparison between ZnO and MoS2 nanoparticles as additives on performance of diesel oil-based nano lubricant , 2020, Scientific Reports.

[31]  M. Tahmasebpoor,et al.  Fluidity enhancement of hard-to-fluidize nanoparticles by mixing with hydrophilic nanosilica and fluid catalytic cracking particles: Experimental and theoretical study , 2019, Physics of Fluids.

[32]  Ji-Whan Ahn,et al.  Synthesis of Nano-Calcium Oxide from Waste Eggshell by Sol-Gel Method , 2019, Sustainability.

[33]  M. Aziz,et al.  Mesoporous adsorbent for CO2 capture application under mild condition: A review , 2019, Journal of Environmental Chemical Engineering.

[34]  J. Valverde,et al.  Multicycle CO2 capture activity and fluidizability of Al-based synthesized CaO sorbents , 2019, Chemical Engineering Journal.

[35]  J. Valverde,et al.  High-performance and low-cost macroporous calcium oxide based materials for thermochemical energy storage in concentrated solar power plants , 2019, Applied Energy.

[36]  M. Tahmasebpoor,et al.  Fluidization Behavior of Cohesive Ca(OH)2 Powders Mixed with Hydrophobic Silica Nanoparticles , 2018, Chemical Engineering & Technology.

[37]  Khalid Al-Ali,et al.  Physical synthesis and characterization of activated carbon from date seeds for CO2 capture , 2018, Journal of Environmental Chemical Engineering.

[38]  A. Kierzkowska,et al.  Optimization of the structural characteristics of CaO and its effective stabilization yield high-capacity CO2 sorbents , 2018, Nature Communications.

[39]  A. Martyla,et al.  New method for the synthesis of Al2O3–CaO and Al2O3–CaO–CaCO3 systems from a metallic precursor by the sol–gel route , 2018, Journal of the Australian Ceramic Society.

[40]  Thanh Son Phan,et al.  Hydroxyapatite supported bimetallic cobalt and nickel catalysts for syngas production from dry reforming of methane , 2018 .

[41]  Yongqing Xu,et al.  Effect of lignin, cellulose and hemicellulose on calcium looping behavior of CaO-based sorbents derived from extrusion-spherization method , 2018 .

[42]  M. Broda,et al.  In Situ XRD and Dynamic Nuclear Polarization Surface Enhanced NMR Spectroscopy Unravel the Deactivation Mechanism of CaO-Based, Ca3Al2O6-Stabilized CO2 Sorbents , 2018 .

[43]  Markus Antonietti,et al.  A search for selectivity to enable CO2 capture with porous adsorbents , 2018 .

[44]  M. Haghighi,et al.  CO2/O2-enhanced ethane dehydrogenation over a sol–gel synthesized Ni/ZrO2–MgO nanocatalyst: Effects of Mgo, ZrO2,and NiO on the catalytic performance , 2018 .

[45]  N. Lefèvre,et al.  Surface ocean carbon dioxide during the Atlantic Meridional Transect (1995–2013); evidence of ocean acidification , 2017 .

[46]  M. Saidi.  Kinetic study and process model development of CO2 absorption using hollow fiber membrane contactor with promoted hot potassium carbonate , 2017 .

[47]  H. Andrade,et al.  CO2 capture on KOH-activated carbons derived from yellow mombin fruit stones , 2016 .

[48]  Bao Xu,et al.  Agglomeration Mechanism of Nanoparticles by Adding Coarse Fluid Catalytic Cracking Particles , 2016 .

[49]  M. Haghighi,et al.  Sol–gel preparation of NiO/ZrO2(x)–MgO(100−x) nanocatalyst used in CO2/O2 oxidative dehydrogenation of ethane to ethylene: influence of Mg/Zr ratio on catalytic performance , 2016, Journal of Sol-Gel Science and Technology.

[50]  J. Valverde,et al.  Use of steel slag for CO2 capture under realistic calcium-looping conditions , 2016 .

[51]  Jian Sun,et al.  Enhanced performance of extruded–spheronized carbide slag pellets for high temperature CO2 capture , 2016 .

[52]  S. Shafiei,et al.  Ultrasound-assisted synthesis and physicochemical characterization of Ni–Co/Al2O3–MgO nanocatalysts enhanced by different amounts of MgO used for CH4/CO2 reforming , 2015 .

[53]  Juncheng Jiang,et al.  CO2 capture with complex absorbent of ionic liquid, surfactant and water , 2015 .

[54]  Jose Manuel Valverde,et al.  Calcium-looping for post-combustion CO2 capture. On the adverse effect of sorbent regeneration under CO2 , 2014 .

[55]  Kaimin Li,et al.  Synthesis and Characterization of Silica Nanoparticles Preparing by Low-Temperature Vapor-Phase Hydrolysis of SiCl4 , 2014 .

[56]  Jose Manuel Valverde,et al.  Nanosilica supported CaO: A regenerable and mechanically hard CO2 sorbent at Ca-looping conditions , 2014 .

[57]  M. Iliuta,et al.  Metal oxide-stabilized calcium oxide CO2 sorbent for multicycle operation , 2013 .

[58]  Paul S. Fennell,et al.  Improvement of Limestone-Based CO2 Sorbents for Ca Looping by HBr and Other Mineral Acids , 2013 .

[59]  E. J. Anthony,et al.  Spray water reactivation/pelletization of spent CaO-based sorbent from calcium looping cycles. , 2012, Environmental science & technology.

[60]  P. Fennell,et al.  Effects of Different Dopants and Doping Procedures on the Reactivity of CaO-based Sorbents for CO2 Capture , 2012 .

[61]  J. Valverde,et al.  Enhancement of fast CO2 capture by a nano-SiO2/CaO composite at Ca-looping conditions. , 2012, Environmental science & technology.

[62]  Abass A. Olajire,et al.  CO2 capture and separation technologies for end-of-pipe applications – A review , 2010 .

[63]  Xiaoping Chen,et al.  Cyclic CO2 capture behavior of KMnO4-doped CaO-based sorbent , 2010 .

[64]  Sotiris E. Pratsinis,et al.  Flame-Made Durable Doped-CaO Nanosorbents for CO2 Capture , 2009 .

[65]  John F. Davidson,et al.  Comparison of Different Natural Sorbents for Removing CO2 from Combustion Gases, as Studied in a Bench-Scale Fluidized Bed , 2008 .

[66]  M. Haghighi,et al.  Sol–gel synthesis of Ni–Co/Al2O3–MgO–ZrO2 nanocatalyst used in hydrogen production via reforming of CH4/CO2 greenhouse gases , 2015 .

[67]  Changlei Qin,et al.  Performance of Extruded Particles from Calcium Hydroxide and Cement for CO2 Capture , 2012 .

[68]  C. Bouallou,et al.  Pre-combustion, post-combustion and oxy-combustion in thermal power plant for CO2 capture , 2010 .

[69]  T. Shimizu,et al.  A twin fluid-bed reactor for removal of CO2 from combustion processes , 1999 .

[70]  N. Seaton.  Determination of the connectivity of porous solids from nitrogen sorption measurements , 1991 .