Role of Al2O3 inclusions on the localized corrosion of Q460NH weathering steel in marine environment

[1]  Xiaogang Li,et al.  Corrosion fatigue crack initiation and initial propagation mechanism of E690 steel in simulated seawater , 2017 .

[2]  C. Dong,et al.  The Combined Effect of Chemical and Structural Factors on Pitting Corrosion Induced by MnS-(Cr, Mn, Al)O Duplex Inclusions , 2017 .

[3]  H. Terryn,et al.  Effect of inclusions modified by rare earth elements (Ce, La) on localized marine corrosion in Q460NH weathering steel , 2017 .

[4]  K. Stiller,et al.  Influence of dwell time on fatigue crack propagation in Alloy 718 laser welds , 2017 .

[5]  Shu-feng Yang,et al.  Pitting Corrosion of Steel Induced by Al2O3 Inclusions , 2017 .

[6]  Meng Zheng,et al.  The cost of corrosion in China , 2017, npj Materials Degradation.

[7]  W. Hwang,et al.  Effect of Adding Cerium on Microstructure and Morphology of Ce-Based Inclusions Formed in Low-Carbon Steel , 2017, Scientific Reports.

[8]  H. Terryn,et al.  Dual-action smart coatings with a self-healing superhydrophobic surface and anti-corrosion properties , 2017 .

[9]  S. Ghosh,et al.  Microstructural characterisation and corrosion performance of old railway girder bridge steel and modern weathering structural steel , 2016 .

[10]  Xiaopeng Han,et al.  Ex situ characterization of metallurgical inclusions in X100 pipeline steel before and after immersion in a neutral pH bicarbonate solution , 2016 .

[11]  Dawei Zhang,et al.  Comparison of barrier properties for a superhydrophobic epoxy coating under different simulated corrosion environments , 2016 .

[12]  K. Gao,et al.  Effects of alloyed Cr and Cu on the corrosion behavior of low-alloy steel in a simulated groundwater solution , 2016 .

[13]  Herman Terryn,et al.  A Multiple-Action Self-Healing Coating , 2016, Front. Mater..

[14]  F. Barlat,et al.  EBSD study of micromechanisms involved in high deformation ability of DP steels , 2015 .

[15]  J. Wei,et al.  Influence of Inclusions on Early Corrosion Development of Ultra-Low Carbon Bainitic Steel in NaCl Solution , 2015 .

[16]  X.L. Ma,et al.  Strain-induced preferential dissolution at the dislocation emergences in MnS: an atomic scale study , 2015 .

[17]  H. Hänninen,et al.  Effect of MnS inclusion dissolution on carbon steel stress corrosion cracking in fuel-grade ethanol , 2015 .

[18]  Young‐kook Lee,et al.  Pitting corrosion behavior in advanced high strength steels , 2015 .

[19]  H. Terryn,et al.  A shape-recovery polymer coating for the corrosion protection of metallic surfaces. , 2015, ACS applied materials & interfaces.

[20]  D. Hur,et al.  Influence of Oxygen Content on the Inclusion Formation and Pitting Corrosion Resistance of Hyper Duplex Stainless Steels , 2014 .

[21]  Eiji Tada,et al.  Long-term monitoring of atmospheric corrosion at weathering steel bridges by an electrochemical impedance method , 2014 .

[22]  A. M. Arsenkin,et al.  The effect of microstructure and non-metallic inclusions on corrosion behavior of low carbon steel in chloride containing solutions , 2014 .

[23]  M. Moayed,et al.  Pitting corrosion of cold rolled solution treated 17-4 PH stainless steel , 2014 .

[24]  I. Beech,et al.  Mechanism of MnS-mediated pit initiation and propagation in carbon steel in an anaerobic sulfidogenic media , 2013 .

[25]  Minseok Choi,et al.  Effects of cerium on the compositional variations in and around inclusions and the initiation and propagation of pitting corrosion in hyperduplex stainless steels , 2013 .

[26]  Yange Yang,et al.  New understanding of the effect of hydrostatic pressure on the corrosion of Ni–Cr–Mo–V high strength steel , 2013 .

[27]  Miao‐yong Zhu,et al.  Evolution Mechanism of Non-metallic Inclusions in Al-Killed Alloyed Steel during Secondary Refining Process , 2013 .

[28]  Shuqi Zheng,et al.  Mechanism of (Mg, Al, Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion , 2013 .

[29]  C. Dong,et al.  Electrochemical Behavior of 304 Stainless Steel in Marine Atmosphere and Its Simulated Solution , 2013 .

[30]  M. Opiela,et al.  Modification of non-metallic inclusions by rare-earth elements in microalloyed steels , 2012 .

[31]  Y. F. Cheng,et al.  Characterization of inclusions of X80 pipeline steel and its correlation with hydrogen-induced cracking , 2011 .

[32]  Y. F. Cheng,et al.  In situ characterization by localized electrochemical impedance spectroscopy of the electrochemical activity of microscopic inclusions in an X100 steel , 2011 .

[33]  Y. F. Cheng,et al.  Effect of non-metallic inclusions on hydrogen-induced cracking of API5L X100 steel , 2010 .

[34]  Y. F. Cheng,et al.  Effects of hydrogen-charging on the susceptibility of X100 pipeline steel to hydrogen-induced cracking , 2009 .

[35]  Cuiwei Du,et al.  Effect of inclusions on initiation of stress corrosion cracks in X70 pipeline steel in an acidic soil environment , 2009 .

[36]  Xianghua Liu,et al.  Deformation behavior of inclusions in stainless steel strips during multi-pass cold rolling , 2009 .

[37]  V. Vignal,et al.  The use of local electrochemical probes and surface analysis methods to study the electrochemical behaviour and pitting corrosion of stainless steels , 2007 .

[38]  V. Vignal,et al.  Influence of the dissolution of MnS inclusions under free corrosion and potentiostatic conditions on the composition of passive films and the electrochemical behaviour of stainless steels , 2006 .

[39]  Patrik Schmuki,et al.  The composition of the boundary region of MnS inclusions in stainless steel and its relevance in triggering pitting corrosion , 2005 .

[40]  H. Shih,et al.  Corrosion resistance and mechanical properties of low-alloy steels under atmospheric conditions , 2005 .

[41]  Y. Zuo,et al.  The metastable pitting of mild steel in bicarbonate solutions , 2004 .

[42]  I. G. Rodionova,et al.  The Effect of Nonmetal Inclusions and Microstructure on Local Corrosion of Carbon and Low-alloyed Steels , 2004 .

[43]  V. Vignal,et al.  Use of the electrochemical microcell technique and the SVET for monitoring pitting corrosion at MnS inclusions , 2004 .

[44]  V. Vignal,et al.  Local analysis of the mechanical behaviour of inclusions-containing stainless steels under straining conditions , 2003 .

[45]  S. Nasu,et al.  Corrosion behavior of steel under wet and dry cycles containing Cr3+ ion , 2003 .

[46]  A. Bastos,et al.  Corrosion of Electrogalvanized Steel in 0.1 M NaCl Studied by SVET , 2003 .

[47]  H. Böhni,et al.  Microelectrodes for corrosion studies in microsystems , 2001 .

[48]  R. Alkire,et al.  Pit Initiation on Stainless Steels in 1 M NaCl With and Without Mechanical Stress , 2001 .

[49]  R. Kelly,et al.  Influence of Alloy Sulfur Content and Bulk Electrolyte Composition on Crevice Corrosion Initiation of Austenitic Stainless Steel , 1998 .

[50]  A. Daud.  Corrosion at Sulphide Inclusions in Stainless Steel , 1996 .

[51]  M. Janik-Czachor,et al.  Discontinuity of the passivating film at nonmetallic inclusions in stainless steels , 1993 .

[52]  J. Castle,et al.  The initiation of pitting corrosion of stainless steels at oxide inclusions , 1992 .

[53]  H. Isaacs.  The Effect of Height on the Current Distribution Measured with a Vibrating Electrode Probe , 1991 .

[54]  G. Wranglén.  Pitting and sulphide inclusions in steel , 1974 .