Thermal energy storage in buildings: opportunities and challenges

The energy sector is a majorarea that is responsible for the country development. Almost 40% of the total energy requirement of an EU country is consumed by the building sector and 60% of which is only used for heating and cooling requirements. This is a prime concern as fossil fuel stocks are depleting and global warming is rising. This is where thermal energy storage can play a major role and reduce the dependence on the use of fossil fuels for energy requirements (heating and cooling) of the building sector. Thermal energy storage refers to the technology which is related to the transfer and storage of heat energy predominantly from solar radiation, alternatively to the transfer and storage of cold from the environment to maintain a comfortable temperature for the inhabitants in the buildings by providing cold in the summer and heat in the winter. This work is an extensive study on the use of thermal energy storage in buildings. It discusses different methods of implementing thermal energy storage into buildings, specifically the use of phase change materials, and also highlights the challenges and opportunities related to implementing this technology. Moreover, this work explains the principles of different types and methods involved in thermal energy storage.

[1]  Wen Liu,et al.  Seasonal thermal energy storage: A techno-economic literature review , 2021 .

[2]  Chun Sing Lai,et al.  Economic and financial appraisal of novel large-scale energy storage technologies , 2021, Energy.

[3]  A. Jemni,et al.  A review on thermal energy storage using phase change materials in passive building applications , 2020, Journal of Building Engineering.

[4]  M. K. Rathod,et al.  Numerical model for evaluating thermal performance of residential building roof integrated with inclined phase change material (PCM) layer , 2020 .

[5]  R. P. Saini,et al.  A review on technical, applications and economic aspect of packed bed solar thermal energy storage system , 2020 .

[6]  M. Nehdi,et al.  Integrating phase change materials in construction materials: Critical review , 2019, Construction and Building Materials.

[7]  Amenallah Guizani,et al.  An experimental and a numerical analysis of the dynamic behavior of PCM-27 included inside a vertical enclosure: Application in space heating purposes , 2018, International Journal of Thermal Sciences.

[8]  Bing Zhao,et al.  System-level performance optimization of molten-salt packed-bed thermal energy storage for concentrating solar power , 2018, Applied Energy.

[9]  Ming Xie,et al.  Experimental exploration of incorporating form-stable hydrate salt phase change materials into cement mortar for thermal energy storage , 2018, Applied Thermal Engineering.

[10]  Khalid M. Saqr,et al.  Improving indoor thermal comfort by using phase change materials: A review , 2018 .

[11]  Dirk Saelens,et al.  Energy flexible buildings: an evaluation of definitions and quantification methodologies applied to thermal storage , 2018 .

[12]  Jesús Lizana,et al.  Advanced low-carbon energy measures based on thermal energy storage in buildings: A review , 2018 .

[13]  I. Sârbu,et al.  A Comprehensive Review of Thermal Energy Storage , 2018 .

[14]  Jesús Lizana,et al.  Advances in thermal energy storage materials and their applications towards zero energy buildings: A critical review , 2017 .

[15]  Ernesto Benini,et al.  Experimental and numerical analyses on thermal performance of different typologies of PCMs integrated in the roof space , 2017 .

[16]  John L. Wilson,et al.  Thermal performance of buildings integrated with phase change materials to reduce heat stress risks during extreme heatwave events , 2017 .

[17]  Habtamu Bayera Madessa,et al.  Thermal Performance of an Office Cubicle Integrated with a Bio-based PCM: Experimental Analyses , 2017 .

[18]  Luisa F. Cabeza,et al.  Economic impact of integrating PCM as passive system in buildings using Fanger comfort model , 2016 .

[19]  Uroš Stritih,et al.  PCM thermal storage system for ‘free’ heating and cooling of buildings , 2015 .

[20]  Luisa F. Cabeza,et al.  Phase change materials and thermal energy storage for buildings , 2015 .

[21]  Fengwu Bai,et al.  Economic Evaluation of Shell-and-tube Latent Heat Thermal Energy Storage for Concentrating Solar Power Applications , 2015 .

[22]  Chris Bales,et al.  Combining thermal energy storage with buildings – a review , 2015 .

[23]  Laurent Royon,et al.  Optimization of PCM embedded in a floor panel developed for thermal management of the lightweight envelope of buildings , 2014 .

[24]  S. M. Sadrameli,et al.  A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium , 2014 .

[25]  Olexandr Balyk,et al.  Energy system investment model incorporating heat pumps with thermal storage in buildings and buffer tanks , 2013 .

[26]  Jonathan Karlsson,et al.  A conceptual model that simulates the influence of thermal inertia in building structures , 2013 .

[27]  Zhishen Wu,et al.  Heat storage properties of the cement mortar incorporated with composite phase change material , 2013 .

[28]  Alexandra R. Rempel,et al.  Rocks, Clays, Water, and Salts: Highly Durable, Infinitely Rechargeable, Eminently Controllable Thermal Batteries for Buildings , 2013 .

[29]  C. Sattler,et al.  Thermochemical Energy Storage , 2013 .

[30]  A. Oliver,et al.  Thermal characterization of gypsum boards with PCM included: Thermal energy storage in buildings through latent heat , 2012 .

[31]  Francesco Borrelli,et al.  Predictive Control for Energy Efficient Buildings with Thermal Storage: Modeling, Stimulation, and Experiments , 2012, IEEE Control Systems.

[32]  Edward S. Rubin,et al.  Economic implications of thermal energy storage for concentrated solar thermal power , 2011 .

[33]  Sungwook Hong,et al.  Effects of wallboard design parameters on the thermal storage in buildings , 2011 .

[34]  Nirmal-Kumar C. Nair,et al.  Impact of Energy Storage in Buildings on Electricity Demand Side Management , 2011, Thermal Energy Storage with Phase Change Materials.

[35]  M. E. Navarro,et al.  Effect of microencapsulated phase change material in sandwich panels , 2010 .

[36]  Luisa F. Cabeza,et al.  Life cycle assessment of the inclusion of phase change materials (PCM) in experimental buildings , 2010 .

[37]  Ibrahim Dincer,et al.  Energy and Exergy Analyses of Thermal Energy Storage Systems , 2010 .

[38]  Li Zhu,et al.  Detailed Energy Saving Performance Analyses on Thermal Mass Walls Demonstrated in a Zero Energy House , 2009 .

[39]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[40]  R. Velraj,et al.  Experimental investigation and numerical simulation analysis on the thermal performance of a building roof incorporating phase change material (PCM) for thermal management , 2008 .

[41]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .

[42]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[43]  B. A. Habeebullah,et al.  Economic feasibility of thermal energy storage systems , 2007 .

[44]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[45]  Xu Xu,et al.  Experimental study of under-floor electric heating system with shape-stabilized PCM plates , 2005 .

[46]  Uroš Stritih,et al.  Heat transfer enhancement in latent heat thermal storage system for buildings , 2003 .

[47]  Ibrahim Dincer,et al.  Energetic, environmental and economic aspects of thermal energy storage systems for cooling capacity , 2001 .

[48]  X. D. Chen,et al.  Domestic electrical space heating with heat storage , 1999 .

[49]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[50]  D. Feldman,et al.  Full scale thermal testing of latent heat storage in wallboard , 1996 .

[51]  D. Nehari,et al.  Hybrid nano improved phase change material for latent thermal energy storage system: Numerical study , 2023, Archive of Mechanical Engineering.

[52]  Kyle R. Gluesenkamp,et al.  Addressing energy storage needs at lower cost via on-site thermal energy storage in buildings , 2021, Energy & Environmental Science.

[53]  Marc Linder,et al.  Using thermochemical reactions in thermal energy storage systems , 2021, Advances in Thermal Energy Storage Systems.

[54]  Jay G. Sanjayan,et al.  Thermal Energy Storage Enhancement of Lightweight Cement Mortars with the Application of Phase Change Materials , 2017 .

[55]  Diane Bastien,et al.  PCM thermal storage design in buildings: Experimental studies and applications to solaria in cold climates , 2017 .

[56]  R. Velraj.  Sensible heat storage for solar heating and cooling systems , 2016 .

[57]  W. Tao,et al.  Fatty acids as phase change materials: A review , 2014 .

[58]  Laurent Royon,et al.  New phase-change material components for thermal management of the light weight envelope of buildings , 2014 .

[59]  K. Nithyanandam,et al.  Cost and performance analysis of concentrating solar power systems with integrated latent thermal energy storage , 2014 .

[60]  R. Parameshwaran,et al.  Sensible Thermal Energy Storage , 2014 .

[61]  S. Kalaiselvam,et al.  Applications of Thermal Energy Storage Systems , 2014 .

[62]  S. Kalaiselvam.  Thermal energy storage technologies for sustainability , 2014 .

[63]  Pavel Charvát,et al.  Materials for Advanced Heat Storage in Buildings , 2013 .

[64]  S. Kalaiselvam,et al.  Thermal Energy Storage Technologies , 2013 .

[65]  Luisa F. Cabeza,et al.  Life Cycle Assessment of alveolar brick construction system incorporating phase change materials (PCMs) , 2013 .

[66]  S. A. Al-Sanea,et al.  Effect of thermal mass on performance of insulated building walls and the concept of energy savings potential , 2012 .

[67]  N. A. Yahay,et al.  Numerical Investigation of Indoor Air Temperature with the Application of PCM Gypsum Board as Ceiling Panels in Buildings , 2011 .

[68]  H. Sob,et al.  Effects of wallboard design parameters on the thermal storage in buildings , 2011 .

[69]  Fredrik Ståhl,et al.  Influence of thermal mass on the heating and cooling demands of a building unit , 2009 .

[70]  S. Kurajica.  Phase change materials , 2007 .

[71]  Edward Morofsky,et al.  HISTORY OF THERMAL ENERGY STORAGE , 2007 .

[72]  Lv Shilei,et al.  Impact of phase change wall room on indoor thermal environment in winter , 2006 .

[73]  Kenneth Ip,et al.  Solar thermal storage using phase change materials for space heating of residential buildings , 2001 .

[74]  Dorel Feldman,et al.  Latent heat storage in building materials , 1993 .

[75]  K. Peippo,et al.  A multicomponent PCM wall optimized for passive solar heating , 1991 .