Experimental and Computational Studies on Oil Injected Twin-Screw Compressor

Gas compressors are mechanical devices used for raising the pressure of gas or vapour either by lowering its volume (as in the case of positive displacement machines) or by imparting to it a high kinetic energy which is converted into pressure in a diffuser (as in the case of centrifugal machines). The classification and use of compressors are described in the next section The selection of compressors for different applications is a crucial issue in the process industry. It is usually the most expensive piece of equipment and has dominant influence on cycle efficiency. The common types of compressors used in industry are reciprocating, twin screw, single screw, centrifugal, scroll and rotary vane. Compressor manufacturers are used to having a large market potential. Probably all types of compressors can be improved over what is available in the market today; but the potential return must justify the expense of research and development to achieve the improvement The twin screw compres...

[1]  Xiong Zenan,et al.  The Application of Microcomputer In Optimum Design and Performance Forecast of Screw Compressor , 1988 .

[2]  X. Zenan,et al.  The Computer Simulation of Oil--Flooded Refrigeration Twin-Screw Compressors , 1986 .

[3]  Nikola Stosic On gearing of helical screw compressor rotors , 1998 .

[4]  J. S. Fleming,et al.  Simulation of the Working Process of an Oil Flooded Helical Screw Compressor with Liquid Refrigerant Injection , 1992 .

[5]  A. D. Young,et al.  An Introduction to Fluid Mechanics , 1968 .

[6]  C. Ferreira,et al.  Quasi One-Dimensional Steady-State Models for Gas Leakage Part II: Improvement of the Viscous Modeling , 1998 .

[7]  G. D. Short,et al.  Twin-Screw Compressor Performance and Complex Ester Lubricants with HCFC-22 , 1990 .

[8]  Pengcheng Shu,et al.  DEVELOPMENT AND APPLICATION OF A SOFTWARE PACKAGE FOR THE DESIGN OF TWIN SCREW COMPRESSORS , 2000 .

[9]  Pengcheng Shu,et al.  Experimental study on p-V indicator diagrams of twin-screw refrigeration compressor with economizer , 2004 .

[10]  v. Boldvig,et al.  A Balanced View of Reciprocating and Screw Compressor Efficiencies , 1980 .

[11]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .

[12]  Xing Ziwen,et al.  Theoretical and experimental study on indicator diagram of twin screw refrigeration compressor , 2004 .

[13]  Ahmed Kovacevic,et al.  RETROFIT 'N' ROTORS FOR EFFICIENT OIL-FLOODED SCREW COMPRESSORS , 2000 .

[14]  Zhi Qiang Wang,et al.  Computer aided design software package for conjugate helical surfaces , 1996 .

[15]  L. Sjoholm Important Parameters for Small, Twin-Screw Refrigeration Compressors , 1986 .

[16]  Faydor L. Litvin,et al.  Computerized design, generation, and simulation of meshing of rotors of screw compressor , 1997 .

[17]  Werner Soedel,et al.  Remarks on Oscillating Bearing Loads in Twin Screw Compressors , 1992 .

[18]  H. Kruse,et al.  An Investigation on Reciprocating and Rotary Refrigeration Compressors , 1984 .

[19]  G. C. Patel,et al.  A Generalized Performance Computer Program for Oil Flooded Twin-Screw Compressors , 1984 .

[20]  K. Brown,et al.  A Methodology for Determining Experimental Uncertainties in Regressions , 1998 .

[21]  L. Sjoholm,et al.  Measurement of the Discharge Port for a Screw Compressor , 2000 .

[22]  Ahmed Kovacevic,et al.  Rotor interference as a criterion for screw compressor design , 2003 .

[23]  D. Deng,et al.  A CAD System for Twin-Screw Compressors , 1992 .

[24]  J. S. Fleming,et al.  Optimisation Techniques Applied to the Design of a Refrigeration TiN Screw Compressor , 1994 .

[25]  P. J. Singh,et al.  Effect of Design Parameters on Oil-Flooded Screw Compressor Performance , 1986 .

[26]  Nikola Stosic,et al.  Development and Optimization of Screw Machines With a Simulation Model—Part I: Profile Generation , 1997 .

[27]  A. Fujiwara,et al.  Experimental Analysis of Screw Compressor Noise and Vibration , 1986 .

[28]  Nikola Stosic,et al.  General Method for Screw Compressor Profile Generation , 1996 .

[29]  Pieter C Koelet,et al.  Industrial refrigeration : principles, design, and applications , 1992 .

[30]  B. Sangfors,et al.  Analytical Modeling of Helical Screw Machine for Analysis and Performance Prediction , 1982 .

[31]  Y. Takahashi,et al.  Single Stage, Oil-Free Screw Compressor with a Compression Ratio Eight , 1986 .

[32]  L. Sjoholm Different Operational Modes for Refrigeration Twin-Screw Compressors , 1986 .

[33]  C. A. Infante Ferreira,et al.  Leakage Experiments On A Running Twin Screw Compressor , 2002 .

[34]  Z. Xiong The Dynamic Measurement and Mating Design of a Screw Compressor Rotor Pair , 1984 .

[35]  David N. Shaw Screw Compressors Control of Vi and Capacity 'The Conflict , 1988 .

[36]  Ahmed Kovacevic,et al.  Opportunities for innovation with screw compressors , 2003 .

[37]  C. Ferreira,et al.  Quasi One-Dimensional Steady-State Models for Gas Leakage Part I: Comparison and Validation , 1998 .

[38]  Z. H. Qin,et al.  COMPRESSION LOAD TRANSMISSION IN SCREW COMPRESSORS , 1997 .

[39]  H. Mori,et al.  Prediction of the Oil Free Screw Compressor Performance Using Digital , 1974 .

[40]  J. Brablik Analytical Model of an Oil-Free Screw Compressor , 1980 .

[41]  Ahmed Kovacevic,et al.  Optimization of screw compressor design , 2002 .

[42]  J. Sauls Design of an Unloader System for Moderate Capacity Refrigeration Screw Compressors , 1998 .

[43]  Jiyuan Tu,et al.  CFD Comparison of Clearance Flow in a Rotor-Casing Assembly Using Asymmetric vs. Symmetric Lobe Rotors , 2003 .

[44]  A Lundberg,et al.  A Comparison of SRM and Globoid Type Screw Compressors at Part Load , 1978 .

[45]  S. M. Yahya,et al.  Fundamentals of Compressible Flow , 1982 .

[46]  D. Mosemann,et al.  Improvements on Refrigerating Screw Compressors of Large Capacity , 1988 .

[47]  Nikola Stosic,et al.  Development and Optimization of Screw Machines With a Simulation Model—Part II: Thermodynamic Performance Simulation and Design Optimization , 1997 .

[48]  D. R. Tree,et al.  Efficiency study of oil cooling of a screw compressor , 1989 .

[49]  Ahmed Kovacevic,et al.  Screw Compressors: Mathematical Modelling and Performance Calculation , 2005 .

[50]  P. J. Singh,et al.  Exact Analytical Representation of Screw Compressor Rotor Geometry , 1988 .

[51]  J S Fleming,et al.  The Analysis of Leakage in a Twin Screw Compressor and its Application to Performance Improvement , 1995 .

[52]  Ahmed Kovacevic,et al.  A Twin Screw Combined Compressor And Expander For CO2 Refrigeration Systems , 2002 .

[53]  M Fujiwara,et al.  Performance analysis of an oil-injected screw compressor and its application , 1995 .

[54]  W. Soedel,et al.  A Method for Computing the Compression Loads in Twin Screw Compressors , 1994 .

[55]  U. K. Bradford THE DESIGN OF EFFICIENT SCREW COMPRESSORS FOR DELIVERY OF DRY AIR , 2003 .

[56]  C. R. Westphal,et al.  Design and Development of A Water-Flooded Screw Compressor Packaged Air Supply System , 1978 .

[57]  Ahmed Kovacevic,et al.  The Design of a Twin-screw Compressor Based on a New Rotor Profile , 1997 .

[58]  C. Bennewitz Software Support for Screw Row Design, Manufacture and Quality Control , 1992 .

[59]  Royce N. Brown,et al.  Compressors: Selection and Sizing , 1986 .

[60]  W. Soedel,et al.  Gas Pulsations in Screw Compressors - Part I: Determination of Port Flow and Interpretation of Periodic Volume Source , 1990 .

[61]  J. S. Fleming,et al.  Thermal Interaction in a Refrigeration Twin Screw Compressor During the Compression Process , 1994 .

[62]  J. S. Fleming,et al.  Obtaining the Optimum Geometrical Parameters of a Refrigeration Helical Screw Compressor , 1992 .

[63]  J S Fleming,et al.  The twin helical screw compressor Part 2: A mathematical model of the working process , 1998 .

[64]  K. Chen,et al.  The Development and Application of a Water Injected Twin Screw Compressor , 1992 .

[65]  P. J. Singh,et al.  Heat Transfer in Oil-Flooded Screw Compressors , 1986 .

[66]  B. Sangfors,et al.  Computer Simulation of the Oil Injected Twin Screw Compressor , 1984 .

[67]  Ahmed Kovacevic,et al.  Mathematical Modelling of the Oil Influence Upon the Working Cycle of Screw Compressors , 1988 .

[68]  K. Koai,et al.  Gas Pulsations in Screw Compressors - Part II: Dynamics of Discharge System and It's Interaction With Port Flow , 1990 .

[69]  Werner Soedel,et al.  A Generalized Approach Towards Compressor Performance Analysis , 1978 .

[70]  B. K. Hodge,et al.  Estimating uncertainty in thermal systems analysis and design , 1999 .

[71]  W. Soedel,et al.  Dynamic Simulation of Rotor Contact Forces in Twin Screw Compressors , 1994 .

[72]  Jan Vimmr Mathematical modelling of compressible inviscid fluid flow through a sealing gap in the screw compressor , 2003, Math. Comput. Simul..

[73]  G. D. Short,et al.  Twin-Screw Compressor Performance and Suitable Lubricants with HFC-134a , 1990 .

[74]  K. Ueno Compressor Efficiency Definitions , .

[75]  G. L. Taft Selection and Application of Industrial Screw Compressors , 1972 .

[76]  N. Kawashima,et al.  Dynamic Analysis of a Rotor-Journal Bearing System for Twin Rotary Compressors , 1990 .

[77]  J. Sauls Development of a Comprehensive Thermodynamic Modeling System for Refrigerant Screw Compressors , 1996 .

[78]  J. H. Alday,et al.  A Program for Mathematical Modeling and Analysis of Rotary Screw Compressor Performance , 1992 .

[79]  P. J. Singh,et al.  A Comprehensive, Computerized Method for Twin-Screw Rotor Profile Generation and Analysis , 1984 .

[80]  J. S. Fleming,et al.  A Generalized Computer Program for Calculating the Bearing Loads in Helical Twin Screw Compressors , 1994 .

[81]  C. A. Infante Ferreira,et al.  ASPECTS OF TWO-PHASE FLOW SCREW COMPRESSOR MODELLING PART I: LEAKAGE FLOW AND ROTOR TIP FRICTION , 2000 .

[82]  Hugh W. Coleman,et al.  Experimentation and Uncertainty Analysis for Engineers , 1989 .

[83]  Z. Zhou,et al.  Analysis of the Applied Forces in Twin-Screw Refrigerant Compressors , 1990 .

[84]  R. Mould,et al.  Computer Aided Manufacture of Original Equipment Manufacturer Screw Compressor Rotors , 1982 .

[85]  Z. Xing,et al.  The Design Of A New Generation Of Twin Screw Refrigeration Compressors , 2002 .

[86]  C. A. Infante Ferreira,et al.  Profile generation method for twin screw compressor rotors based on the meshing line , 2005 .

[87]  J. F. Hamilton,et al.  Main Geometric Characteristics of the Twin Screw Compressor , 1992 .

[88]  L. Sjoholm,et al.  Variable Volume-Ratio and Capacity Control in Twin-Screw Compressors , 1986 .

[89]  K. Hanjalić,et al.  Experimental Investigation of the Influence of Oil Injection Upon the Screw Compressor Working Process , 1990 .

[90]  A. Pietsch,et al.  Thermodynamic Calculation of a Dual Screw Compressor Based on Experimentally Measured Values Taking Supercharge into Account , 1990 .

[91]  W. Janna,et al.  Introduction to Fluid Mechanics , 2012 .

[92]  Ahmed Kovacevic,et al.  Optimisation of screw compressors , 2003 .

[93]  Z. Xiong Use the Method of Magnetic Score to Measure the Dynamic Parameters of the Screw Compressor , 1986 .

[94]  D. S. Szarkowicz,et al.  Modeling and Simulation of Rotary Screw Compressors , 1980 .

[95]  A. Martínez,et al.  Test of an improved oil injected helium screw compressor at Fermilab , 1994 .

[96]  Mitsuru Fujiwara,et al.  Computer Modeling for Performance Analysis of Rotary Screw Compressor , 1984 .

[97]  S. E. Edstrom,et al.  A Modern Way to Good Screw Rotors , 1992 .

[98]  Nikola Stosic,et al.  Modelling of Screw Compressor Capacity Control , 1998 .

[99]  K. Haugland,et al.  Pressure Indication of Twin Screw Compressor , 1990 .

[100]  N. Peng,et al.  New Rotor Profile and its Performance Prediction of Screw Compressors , 1990 .

[101]  X. Zenan,et al.  Study in Actual Profile Surface and Engaging Clearance of Screw Compressor Rotors , 1986 .

[102]  K. Miyoshi Analysis of Screw Compressor Performance Based on Indicator Diagrams , 1992 .

[103]  Akira Matsui,et al.  The improvement of screw compressor performance using a newly developed rotor profile , 1994 .