Effect of polymer on the interaction of alkali with heavy oil and its use in improving oil recovery
暂无分享,去创建一个
[1] Guicai Zhang,et al. Potential of alkaline flooding to enhance heavy oil recovery through water-in-oil emulsification , 2013 .
[2] L. Ding,et al. Study on the variation of dynamic interfacial tension in the process of alkaline flooding for heavy oil , 2013 .
[3] Lei Zhang,et al. Improvement of Sweep Efficiency by Alkaline Flooding for Heavy Oil Reservoirs , 2013 .
[4] K. Mohanty,et al. Heavy-Oil Recovery by In-Situ Emulsion Formation , 2012 .
[5] Qiang Liu,et al. Displacement mechanisms of enhanced heavy oil recovery by alkaline flooding in a micromodel , 2012 .
[6] Haiyan Zhang,et al. Experimental Study of the Interaction between NaOH, Surfactant, and Polymer in Reducing Court Heavy Oil/Brine Interfacial Tension , 2012 .
[7] Guicai Zhang,et al. Study of the Factors Influencing Alkaline Flooding in Heavy-Oil Reservoirs , 2012 .
[8] Guicai Zhang,et al. Comparative Effectiveness of Alkaline Flooding and Alkaline–Surfactant Flooding for Improved Heavy-Oil Recovery , 2012 .
[9] L. Jin,et al. The Effect of Oil Viscosity, Permeability, and Residual Oil Saturation on the Performance of Alkaline Flooding in the Recovery of Heavy Oil , 2012 .
[10] Xiaoling Liu,et al. Analysis of Microscopic Displacement Mechanisms of Alkaline Flooding for Enhanced Heavy-Oil Recovery , 2011 .
[11] M. Dong,et al. Study of Alkaline/Polymer Flooding for Heavy-Oil Recovery Using Channeled Sandpacks , 2011 .
[12] Xiaoling Liu,et al. Research on Mechanisms of Alkaline Flooding for Heavy Oil , 2010 .
[13] R. Seright. Potential for Polymer Flooding Reservoirs With Viscous Oils , 2010 .
[14] Malcolm Greaves,et al. A review of novel techniques for heavy oil and bitumen extraction and upgrading , 2010 .
[15] Haiyan Zhang,et al. Which One Is More Important in Chemical Flooding for Enhanced Court Heavy Oil Recovery, Lowering Interfacial Tension or Reducing Water Mobility? , 2010 .
[16] Jingyi Wang,et al. Optimum effective viscosity of polymer solution for improving heavy oil recovery , 2009 .
[17] Xiaofei Fu,et al. Review of Practical Experience by Polymer Flooding at Daqing , 2009 .
[18] Qiang Liu,et al. Enhanced heavy oil recovery through interfacial instability: A study of chemical flooding for Brintnell heavy oil , 2009 .
[19] J. Bryan,et al. Potential for Alkali-Surfactant Flooding in Heavy Oil Reservoirs Through Oil-in-Water Emulsification , 2009 .
[20] Qiang Liu,et al. Surfactant enhanced alkaline flooding for Western Canadian heavy oil recovery , 2007 .
[21] K. A. Miller. Improving the State of the Art of Western Canadian Heavy Oil Waterflood Technology , 2006 .
[22] J. Scoular,et al. Chemical Methods for Heavy Oil Recovery , 2001 .
[23] F. D. Martin,et al. EOR Screening Criteria Revisited—Part 2: Applications and Impact of Oil Prices , 1997 .
[24] R. Seright,et al. EOR Screening Criteria Revisited - Part 1: Introduction to Screening Criteria and Enhanced Recovery Field Projects , 1997 .
[25] Peter H. Doe,et al. Polymer flooding review , 1987 .
[26] H. L. Chang,et al. Polymer Flooding Technology Yesterday, Today, and Tomorrow , 1978 .
[27] J. S. Rhudy,et al. Recovery Of High-Viscosity Crudes By Polymer Flooding , 1977 .
[28] R. E. Williams,et al. Oil Recovery by Alkaline Waterflooding , 1974 .
[29] N. Cameron,et al. Polymer Flood Application to Improve Heavy Oil Recovery at East Bodo , 2007 .
[30] Apostolos Kantzas,et al. Heavy Oil Waterflooding: Effects of Flow Rate and Oil Viscosity , 2007 .