Effects of Constrained Groove Pressing (CGP) on the plane stress fracture toughness of pure copper

[1]  M. Shokrieh,et al.  Experimental determination of tensile strength and K Ic of polymer concretes using semi-circular bend (SCB) specimens , 2012 .

[2]  Yiyi Chen,et al.  Parameter calibrations and application of micromechanical fracture models of structural steels , 2012 .

[3]  M. Reihanian,et al.  On the mechanical properties and microstructure of commercially pure Al fabricated by semi-constrained groove pressing , 2011 .

[4]  G. Niranjan,et al.  Deep drawability of commercial purity aluminum sheets processed by groove pressing , 2010 .

[5]  A. Kokabi,et al.  Constrained groove pressing of low carbon steel: Nano-structure and mechanical properties , 2010 .

[6]  Kaiping Peng,et al.  Microstructure dependence of a Cu-38Zn alloy on processing conditions of constrained groove pressing , 2009 .

[7]  A. Mani,et al.  The effects of intermediate and post-annealing phenomena on the mechanical properties and microstructure of constrained groove pressed copper sheet , 2009 .

[8]  K. Lu,et al.  Enhanced fracture toughness of bulk nanocrystalline Cu with embedded nanoscale twins , 2009 .

[9]  M. Zehetbauer,et al.  Microstructure and fatigue properties of the ultrafine-grained AM60 magnesium alloy processed by equal-channel angular pressing , 2009 .

[10]  M. Cieslar,et al.  Ultrafine-grained structure development and deformation behavior of aluminium processed by constrained groove pressing , 2009 .

[11]  L. Kunz,et al.  Fatigue behavior and damage characteristic of ultra-fine grain low-purity copper processed by equal-channel angular pressing (ECAP) , 2008 .

[12]  V. Rajinikanth,et al.  Effect of repetitive corrugation and straightening on Al and Al–0.25Sc alloy , 2008 .

[13]  Z. G. Wang,et al.  Cyclic deformation and fatigue properties of Al-0.7 wt.% Cu alloy produced by equal channel angular pressing , 2005 .

[14]  S. K. Maiti,et al.  Experimental investigation on ductile stable crack growth emanating from wire-cut notch in AISI 4340 steel , 2005 .

[15]  L. Kunz,et al.  Fatigue notch sensitivity of ultrafine-grained copper , 2005 .

[16]  T. Sakai,et al.  Ultra Grain Refinement of Commercial Purity Aluminum by a Multi-Stack ARB Process , 2003 .

[17]  J. J. Park,et al.  Numerical and experimental investigations of constrained groove pressing and rolling for grain refinement , 2002 .

[18]  Jong-jin Park,et al.  Constrained groove pressing and its application to grain refinement of aluminum , 2002 .

[19]  W. Kim,et al.  Microstructural characteristics and thermal stability of ultrafine grained 6061 Al alloy fabricated by accumulative roll bonding process , 2001 .

[20]  K. Higashi,et al.  Overview of fatigue properties of fine grain 5056 Al-Mg alloy processed by equal-channel angular pressing , 2001 .

[21]  H. Ye,et al.  Substructures of deformation twins and twin intersections in a Ti–45Al–8Nb–2.5Mn alloy heavily deformed at room temperature , 2001 .

[22]  David J. Smith,et al.  Grain boundary structure in Al–Mg and Al–Mg–Sc alloys after equal-channel angular pressing , 2001 .

[23]  Terence G. Langdon,et al.  The process of grain refinement in equal-channel angular pressing , 1998 .

[24]  J. Weertman,et al.  Cyclic softening of ultrafine grain copper , 1998 .