Development of Variable Camber Continuous Trailing Edge Flap for Performance Adaptive Aeroelastic Wing

This paper summarizes the recent development of an adaptive aeroelastic wing shaping control technology called variable camber continuous trailing edge flap (VCCTEF). As wing flexibility increases, aeroelastic interactions with aerodynamic forces and moments become an increasingly important consideration in aircraft design and aerodynamic performance. Furthermore, aeroelastic interactions with flight dynamics can result in issues with vehicle stability and control. The initial VCCTEF concept was developed in 2010 by NASA under a NASA Innovation Fund study entitled "Elastically Shaped Future Air Vehicle Concept," which showed that highly flexible wing aerodynamic surfaces can be elastically shaped in-flight by active control of wing twist and bending deflection in order to optimize the spanwise lift distribution for drag reduction. A collaboration between NASA and Boeing Research & Technology was subsequently funded by NASA from 2012 to 2014 to further develop the VCCTEF concept. This paper summarizes some of the key research areas conducted by NASA during the collaboration with Boeing Research and Technology. These research areas include VCCTEF design concepts, aerodynamic analysis of VCCTEF camber shapes, aerodynamic optimization of lift distribution for drag minimization, wind tunnel test results for cruise and high-lift configurations, flutter analysis and suppression control of flexible wing aircraft, and multi-objective flight control for adaptive aeroelastic wing shaping control.

[1]  Nhan Nguyen,et al.  Aeroelastic Modeling of Elastically Shaped Aircraft Concept via Wing Shaping Control for Drag Reduction , 2012 .

[2]  James M. Urnes,et al.  Active Control for Elastic Wing Structure Dynamic Modes , 2015 .

[3]  S. S. Stahara.  Operational manual for two-dimensional transonic code TSFOIL , 1978 .

[4]  Dan Clingman,et al.  Control System Design for a Variable Camber Continuous Trailing Edge Flap System on an Elastic Wing , 2014 .

[5]  Sonia Lebofsky,et al.  Experimental Investigation of a Flexible Wing with a Variable Camber Continuous Trailing Edge Flap Design , 2014 .

[6]  Eric Ting,et al.  Flutter Analysis of Mission-Adaptive Wing with Variable Camber Continuous Trailing Edge Flap , 2014 .

[7]  Sonia Lebofsky,et al.  Aeroelastic Modeling and Drag Optimization of Flexible Wing Aircraft with Variable Camber Continuous Trailing Edge Flap , 2014 .

[8]  Jacob Robert Schaefer,et al.  Peak-Seeking Optimization of Trim for Reduced Fuel Consumption: Flight-test Results , 2013 .

[9]  G. K. Yamauchi,et al.  Trends of Reynolds number effects on two-dimensional airfoil characteristics for helicopter rotor analyses , 1983 .

[10]  Yan Liu,et al.  Robust Optimization of Variable-Camber Continuous Trailing-Edge Flap System Action Using Stochastic Kriging , 2015 .

[11]  Sonia Lebofsky,et al.  Optimization for Load Alleviation of Truss-Braced Wing Aircraft With Variable Camber Continuous Trailing Edge Flap , 2015 .

[12]  Zhiqiang Zhou,et al.  Low-Weight Low-Drag Truss-Braced Wing Design Using Variable Camber Continuous Trailing Edge Flaps , 2015 .

[13]  Eric Ting,et al.  Flight Dynamic Modeling and Stability Analysis of Flexible Wing Generic Transport Aircraft , 2014 .

[14]  Moffett Field,et al.  Elastically Shaped Wing Optimization and Aircraft Concept for Improved Cruise Efficiency , 2013 .

[15]  Sonia Lebofsky,et al.  Aeroelastic Analysis of Wind Tunnel Test Data of a Flexible Wing with a Variable Camber Continuous Trailing Edge Flap (VCCTEF) , 2015 .

[16]  Michael J. Aftosmis,et al.  Static Aeroelastic Analysis with an Inviscid Cartesian Method , 2014 .

[17]  Sonia Lebofsky,et al.  Wind Tunnel Investigation of a Flexible Wing High-Lift Configuration with a Variable Camber Continuous Trailing Edge Flap Design , 2015 .

[18]  Nhan T. Nguyen,et al.  A Multi-Objective Flight Control Approach for Performance Adaptive Aeroelastic Wing , 2015 .

[19]  Eric Ting,et al.  Comparison of Unsteady Aerodynamics Approximations for Time-Domain Representation of Frequency-Independent Aeroelastic State-Space Models , 2015 .

[20]  Michael J. Aftosmis,et al.  Optimized Off-Design Performance of Flexible Wings with Continuous Trailing-Edge Flaps , 2015 .

[21]  Nhan T. Nguyen,et al.  Adaptive Linear Quadratic Gaussian Optimal Control Modification for Flutter Suppression of Adaptive Wing , 2015 .

[22]  Eric Ting,et al.  Static Aeroelastic and Longitudinal Trim Model of Flexible Wing Aircraft Using Finite-Element Vortex-Lattice Coupled Solution , 2014 .

[23]  Nhan T. Nguyen,et al.  Development of Variable Camber Continuous Trailing Edge Flap System , 2012 .

[24]  Eric Ting,et al.  A Mission-Adaptive Variable Camber Flap Control System to Optimize High Lift and Cruise Lift-to-Drag Ratios of Future N+3 Transport Aircraft , 2013 .

[25]  Eric Ting,et al.  Coupled Vortex-Lattice Flight Dynamic Model with Aeroelastic Finite-Element Model of Flexible Wing Transport Aircraft with Variable Camber Continuous Trailing Edge Flap for Drag Reduction , 2013 .

[26]  Eli Livne,et al.  The design, construction, and tests of a concept aeroelastic wind tunnel model of a high-lift variable camber continuous trailing edge flap (HL-VCCTEF) wing configuration , 2015 .

[27]  Nhan Nguyen,et al.  NASA Innovation Fund 2010 Project Elastically Shaped Future Air Vehicle Concept , 2010 .

[28]  Sonia Lebofsky,et al.  Multidisciplinary Drag Optimization of Reduced Stiffness Flexible Wing Aircraft With Variable Camber Continuous Trailing Edge Flap , 2015 .

[29]  U. Kaul,et al.  A 3-D Drag Optimization Study of Variable Camber Continuous Trailing Edge Flap (VCCTEF) Using OVERFLOW , 2014 .

[30]  Eli Livne,et al.  Design, construction, and tests of an aeroelastic wind tunnel model of a variable camber continuous trailing edge flap (VCCTEF) concept wing , 2014 .