The Effect of Processing Conditions on Varistors Prepared From Nanocrystalline ZnO

Nanoparticles of ZnO were prepared by the reaction of ethanolic solutions of zinc acetate and oxalic acid followed by drying (80 °C) and calcination (500 °C). Subsequently varistor materials were fabricated from this nanoparticular ZnO via two separate routes:- a) from a “core shell” material using metal salts as additives; b) by using a conventional solid state mixing of metal oxides. Sintering (1050 °C) and subsequent electrical studies were carried out for each of these samples and they were compared with commercial varistor samples prepared under similar conditions. “Core shell” type varistor material showed considerably higher breakdown voltage (Vc = 850 ± 30 V mm−1) as compared to a sample prepared by mixing with metal oxides (Vc = 683 ± 30 V mm−1) or commercial varistor discs (Vc = 507 ± 30 V mm−1). The high breakdown voltage obtained is attributed to the formation of more varistor-active grain boundaries per unit area.

[1]  D. Shah,et al.  Microemulsion mediated synthesis of zinc-oxide nanoparticles for varistor studies , 1993 .

[2]  Michael Grätzel,et al.  Dye-Sensitized Core−Shell Nanocrystals: Improved Efficiency of Mesoporous Tin Oxide Electrodes Coated with a Thin Layer of an Insulating Oxide , 2002 .

[3]  P. Mulvaney,et al.  Au@SnO2 Core–Shell Nanocapacitors , 2000 .

[4]  Anthony R. West,et al.  Solid State Chemistry and its Applications , 1984 .

[5]  Huadong Peng,et al.  Preparation and properties of zinc oxide nanoparticles coated with zinc aluminate , 2003 .

[6]  R. Freer,et al.  Characterization of spinel particles in zinc oxide varistors , 1990 .

[7]  Nonlinear properties and stability against DC accelerated aging stress of praseodymium oxide-based ZnO varistors by Er2O3 doping , 2003 .

[8]  T. Gupta.  Application of Zinc Oxide Varistors , 1990 .

[9]  M. Matsuoka.  Nonohmic Properties of Zinc Oxide Ceramics , 1971 .

[10]  Ziyu Wu,et al.  Synthesis and evolution of rod-like nano-scaled ZnC2O4·2H2O whiskers to ZnO nanoparticles , 2003 .

[11]  F. Weill,et al.  New application of the core–shell concept to ferroelectric nanopowders , 2003 .

[12]  R. N. Viswanath,et al.  Preparation and characterization of nanocrystalline ZnO based materials for varistor applications , 1995 .

[13]  J. Tartaj,et al.  Sintering Behavior and Electrical Properties of Nanosized Doped‐ZnO Powders Produced by Metallorganic Polymeric Processing , 2004 .

[14]  A. Jiménez-González,et al.  Optical and electrical characteristics of aluminum-doped ZnO thin films prepared by solgel technique , 1998 .

[15]  B. Sharma,et al.  Novel route for preparation of high voltage varistor powder , 1997 .

[16]  S. Haile,et al.  Aqueous Precipitation of Spherical Zinc Oxide Powders for Varistor Applications , 1989 .

[17]  Yao Yao,et al.  Zino Oxide Varistors Made from Powders Prepared by Amine Processing , 1989 .

[18]  E. Lifshitz,et al.  Optically detected spin and spin-orbital resonance studies of CdSe/CdS core-shell nanocrystals , 2001 .

[19]  M. A. Malik,et al.  A Simple Route to the Synthesis of Core/Shell Nanoparticles of Chalcogenides , 2002 .

[20]  M. Nygren,et al.  Preparation of ZnO-based varistors by the sol–gel technique , 1994 .

[21]  P. Ciambelli,et al.  Supercritical antisolvent precipitation of nanoparticles of a zinc oxide precursor , 1999 .