A comparative study of nitrogen conversion during pyrolysis of coconut fiber, its corresponding biochar and their blends with lignite.

In the present study, the conversion of fuel-N to HCN and NH3 was investigated during rapid pyrolysis of raw biomass (coconut fiber), its corresponding biochar and their blends with lignite within a temperature range of 600-900°C. The results showed that the raw biomass and the biochar showed totally different nitrogen partitioning between NH3 and HCN. HCN was the dominant nitrogen pollutant from pyrolysis of raw biomass, while for the biochar pyrolysis the yield of NH3 was slightly higher than that of HCN. Synergistic interactions occurred within both raw biomass/lignite and biochar/lignite blends, especially for the biochar/lignite blend, and resulted in reduced yields of HCN and NH3, decreased the total nitrogen percentage retained in the char and promoted harmless N2 formation. These findings suggest that biochar/lignite co-firing for energy production may have the enhanced benefit of reduced emissions of nitrogen pollutants than raw biomass/lignite.

[1]  K. Kubica,et al.  Devolatilisation characteristics of coal and biomass blends , 2005 .

[2]  Zhengang Liu,et al.  Production of solid biochar fuel from waste biomass by hydrothermal carbonization , 2013 .

[3]  Jun-ichiro Hayashi,et al.  Conversion of Fuel-N into HCN and NH3 During the Pyrolysis and Gasification in Steam: A Comparative Study of Coal and Biomass† , 2007 .

[4]  Wei Hsin Chen,et al.  A comparison of gasification phenomena among raw biomass, torrefied biomass and coal in an entrained-flow reactor , 2013 .

[5]  Yasuhiro Ohshima,et al.  Enhancement of N2 formation from the nitrogen in carbon and coal by calcium , 2001 .

[6]  H. Vuthaluru.  Investigations into the pyrolytic behaviour of coal/biomass blends using thermogravimetric analysis. , 2004, Bioresource technology.

[7]  R. Ruan,et al.  The effects of torrefaction on compositions of bio-oil and syngas from biomass pyrolysis by microwave heating. , 2013, Bioresource technology.

[8]  Jae Goo Lee,et al.  Co-pyrolysis characteristics of sawdust and coal blend in TGA and a fixed bed reactor. , 2010, Bioresource technology.

[9]  Y. Ohtsuka,et al.  Key factors for formation of N2 from low-rank coals during fixed bed pyrolysis : Pyrolysis conditions and inherent minerals , 1997 .

[10]  L. I. Darvell,et al.  Combustion and gasification characteristics of chars from raw and torrefied biomass. , 2012, Bioresource technology.

[11]  Lars-Erik Åmand,et al.  Formation of HNCO, HCN, and NH3 from the pyrolysis of bark and nitrogen-containing model compounds , 2004 .

[12]  Zhengang Liu,et al.  A comparison of thermal behaviors of raw biomass, pyrolytic biochar and their blends with lignite. , 2013, Bioresource technology.

[13]  Alan Williams,et al.  Physicochemical characterisation of torrefied biomass , 2013 .

[14]  Hai‐feng Liu,et al.  Nitrogen conversion under rapid pyrolysis of two types of aquatic biomass and corresponding blends with coal. , 2011, Bioresource technology.

[15]  K. Asami,et al.  Role of iron catalyst in fate of fuel nitrogen during coal pyrolysis , 1996 .

[16]  Edward Furimsky,et al.  Effect of alkali and alkaline earth metals on nitrogen release during temperature programmed pyrolysis of coal , 1997 .

[17]  S. Mani,et al.  Impact of torrefaction on the grindability and fuel characteristics of forest biomass. , 2011, Bioresource technology.

[18]  Y. Ohshima,et al.  Iron-catalyzed nitrogen removal as N2 from PAN-derived activated carbon , 2012 .

[19]  C. Chao,et al.  Co-combustion performance of coal with rice husks and bamboo , 2007 .

[20]  Zhengang Liu,et al.  Upgrading of waste biomass by hydrothermal carbonization (HTC) and low temperature pyrolysis (LTP): A comparative evaluation , 2014 .

[21]  A. Jensen,et al.  Fuel nitrogen conversion in solid fuel fired systems , 2003 .

[22]  P. Jansens,et al.  Biomass combustion in fluidized bed boilers: Potential problems and remedies , 2009 .

[23]  Zhengang Liu,et al.  A study of nitrogen conversion and polycyclic aromatic hydrocarbon (PAH) emissions during hydrochar–lignite co-pyrolysis , 2013 .

[24]  Y. Ju,et al.  Maximizing biodiesel production from Yarrowia lipolytica Po1g biomass using subcritical water pretreatment. , 2012, Bioresource technology.

[25]  Cheoreon Moon,et al.  Effect of blending ratio on combustion performance in blends of biomass and coals of different ranks , 2013 .

[26]  Sang-Woo Park,et al.  Torrefaction and low-temperature carbonization of woody biomass: evaluation of fuel characteristics of the products. , 2012 .

[27]  Mikko Hupa,et al.  Homogeneous N2O chemistry at fluidized bed combustion conditions: A kinetic modeling study , 1991 .

[28]  Wen-Jhy Lee,et al.  Thermogravimetric analysis and kinetics of co-pyrolysis of raw/torrefied wood and coal blends , 2013 .

[29]  Y. Ohtsuka,et al.  Nitrogen Distribution in a Fixed Bed Pyrolysis of Coals with Different Ranks: Formation and Source of N2 , 1997 .

[30]  Jun Li,et al.  HCN and NH3 Released from Biomass and Soybean Cake under Rapid Pyrolysis , 2010 .

[31]  Serdar Yaman,et al.  Synergy in devolatilization characteristics of lignite and hazelnut shell during co-pyrolysis , 2007 .