Air flow simulation of HVAC system in compartment of a passenger coach

Abstract In this study, numerical simulation of airflow in the compartment of a passenger coach was carried out in summer. An experimental measurement was also conducted to verify the performance of the numerical model. The turbulent air flow in the compartment was supplied by the HVAC system of the coach. The numerical simulation in the compartment was performed in two cases: seated and slept manikins. The manikins were considered as heated manikins in all the simulations. The turbulent air flow was modeled using v2f turbulent model. Two conditions in the compartment, including temperature and velocity comfort criteria were assessed in the compartment with and without the presence of the manikins. Moreover, some modifications were implemented in the compartment design to improve the comfort conditions around the manikin in the two cases. Results showed that due to the inappropriate design of the compartment, the thermal comfort conditions do not evenly distribute in the compartment and this issue makes the passengers uncomfortable. The outcome of the modifications showed that the air flow symmetrically enters to the compartment and provides better thermal conditions for the passengers seated/slept in the compartment.

[1]  M. A. Mehrabian,et al.  Numerical study to predict the particle deposition under the influence of operating forces on a tilted surface in the turbulent flow , 2011 .

[2]  Abdulvahap Yigit,et al.  Experimental and theoretical investigation of the effect of radiation heat flux on human thermal comfort , 2016 .

[3]  Morteza Abdolzadeh,et al.  Quantitative and Qualitative Energy Assessments of Floor Heating and Skirting Board Heating Systems in a Room , 2017 .

[4]  Goodarz Ahmadi,et al.  Computational modeling of effects of thermal plume adjacent to the body on the indoor airflow and particle transport , 2012 .

[5]  Shian Gao,et al.  Energy saving and indoor thermal comfort evaluation using a novel local exhaust ventilation system for office rooms. , 2017 .

[6]  Valéry Ann Jacobs,et al.  Thermal comfort of the surgical staff in the operating room , 2014 .

[7]  Jamal Khodakarami,et al.  Thermal comfort in hospitals – A literature review , 2012 .

[8]  Minglu Qu,et al.  Study on the thermal comfort characteristics under the vent with supplying air jets and cross-flows coupling in subway stations , 2016 .

[9]  F. Lien,et al.  Computations of transonic flow with the v2–f turbulence model , 2001 .

[10]  P. A. Aswatha Narayana,et al.  Airflow analysis in an air conditioning room , 2007 .

[11]  T Berlitz,et al.  Interior air flow simulation in railway rolling stock , 2002 .

[12]  Peter V. Nielsen,et al.  Modifications of the v2-f Model for Computing the Flow in a 3D Wall Jet , 2003 .

[13]  Xiufeng Yang,et al.  Numerical investigation on the airflow characteristics and thermal comfort in buoyancy-driven natural ventilation rooms , 2015 .

[14]  Standard Ashrae Thermal Environmental Conditions for Human Occupancy , 1992 .

[15]  M. Abdolzadeh,et al.  Combined effect of thermophoretic force and other influencing parameters on the particle deposition rate on a tilted rough surface , 2011 .

[16]  Rachid Bennacer,et al.  Residential building energy demand and thermal comfort: Thermal dynamics of electrical appliances and their impact , 2016 .

[17]  M. Chludzińska,et al.  Thermal environment conditions in Polish operating rooms , 2015 .

[18]  M. Abdolzadeh,et al.  Computational modeling of particle transport and distribution emitted from a Laserjet printer in a ventilated room with different ventilation configurations , 2016 .

[19]  Yan-ming Kang,et al.  Experimental investigation on transient natural ventilation driven by thermal buoyancy , 2014 .