Final Draft of the original manuscript

Abstract

[1]  P. Voorhees,et al.  Effect of transport mechanism on the coarsening of bicontinuous structures: A comparison between bulk and surface diffusion , 2020 .

[2]  D. Snihirova,et al.  Tailoring electrolyte additives for controlled Mg-Ca anode activity in aqueous Mg-air batteries , 2020, Journal of Power Sources.

[3]  F. Tapiador,et al.  Regional climate models: 30 years of dynamical downscaling , 2020 .

[4]  D. Snihirova,et al.  Tailoring the Mg-air primary battery performance using strong complexing agents as electrolyte additives , 2020 .

[5]  Xingrui Chen,et al.  The quasicrystal of Mg–Zn–Y on discharge and electrochemical behaviors as the anode for Mg-air battery , 2020 .

[6]  Xingrui Chen,et al.  Effects of external field treatment on the electrochemical behaviors and discharge performance of AZ80 anodes for Mg-air batteries , 2020 .

[7]  S. Tao,et al.  Analysis of multiple drivers of air pollution emissions in China via interregional trade , 2020 .

[8]  P. Voorhees,et al.  Morphological characterization of bicontinuous microstructures using two-point statistics , 2019, IOP Conference Series: Materials Science and Engineering.

[9]  D. Snihirova,et al.  Clarifying the decisive factors for utilization efficiency of Mg anodes for primary aqueous batteries , 2019, Journal of Power Sources.

[10]  M. Llopart,et al.  Assessment of multi-model climate projections of water resources over South America CORDEX domain , 2019, Climate Dynamics.

[11]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[12]  Yiming Jin,et al.  Time-sequential corrosion behaviour observation of micro-alloyed Mg-0.5Zn-0.2Ca alloy via a quasi-in situ approach , 2019, Corrosion Science.

[13]  H. Formayer,et al.  Effect of 1-km Subgrid Land-Surface Heterogeneity on the Multi-year Simulation of RCM-Modelled Surface Climate Over the Region of Complex Topography , 2019, Earth Systems and Environment.

[14]  M. Buchet,et al.  Phase-field investigation of the coarsening of porous structures by surface diffusion , 2019, Physical Review Materials.

[15]  S. Solman,et al.  Multiscale precipitation variability over South America: Analysis of the added value of CORDEX RCM simulations , 2019, Climate Dynamics.

[16]  J. Markmann,et al.  Topology evolution during coarsening of nanoscale metal network structures , 2019, Physical Review Materials.

[17]  Jing Meng,et al.  The cascade of global trade to large climate forcing over the Tibetan Plateau glaciers , 2019, Nature Communications.

[18]  Sviatlana V. Lamaka,et al.  Revealing the impact of second phase morphology on discharge properties of binary Mg-Ca anodes for primary Mg-air batteries , 2019, Corrosion Science.

[19]  Z. Mi,et al.  Initial Declines in China’s Provincial Energy Consumption and Their Drivers , 2019, Joule.

[20]  N. Scharnagl,et al.  Microstructural influence on corrosion behavior of MgZnGe alloy in NaCl solution , 2019, Journal of Alloys and Compounds.

[21]  Zhifeng Wang,et al.  AZ61 and AZ61-La Alloys as Anodes for Mg-Air Battery , 2019, Journal of Materials Engineering and Performance.

[22]  B. You,et al.  Effect of Y addition on removal of Fe impurity from magnesium alloys , 2019, Scripta Materialia.

[23]  Xuan Liu,et al.  Effects of the combinative Ca, Sm and La additions on the electrochemical behaviors and discharge performance of the as-extruded AZ91 anodes for Mg-air batteries , 2019, Journal of Power Sources.

[24]  Y. Moriguchi,et al.  Inter-regional spillover of China's sulfur dioxide (SO2) pollution across the supply chains , 2019, Journal of Cleaner Production.

[25]  Zhicong Shi,et al.  Effect of crystallographic orientation on the discharge and corrosion behaviour of AP65 magnesium alloy anodes , 2018, Corrosion Science.

[26]  J. Meng,et al.  Atmospheric Mercury Outflow from China and Interprovincial Trade. , 2018, Environmental science & technology.

[27]  R. Sarpong,et al.  Bio-inspired synthesis of xishacorenes A, B, and C, and a new congener from fuscol† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c9sc02572c , 2019, Chemical science.

[28]  F. Ren,et al.  Electrochemical performance of Mg-air batteries based on AZ series magnesium alloys , 2018, Ionics.

[29]  T. Wada,et al.  Nanoporous magnesium , 2018, Nano Research.

[30]  Laurent Z. X. Li,et al.  Assessment of CORDEX simulations over South America: added value on seasonal climatology and resolution considerations , 2018, Climate Dynamics.

[31]  Sviatlana V. Lamaka,et al.  Mg-Ca binary alloys as anodes for primary Mg-air batteries , 2018, Journal of Power Sources.

[32]  Xuan Liu,et al.  Discharge performance of the magnesium anodes with different phase constitutions for Mg-air batteries , 2018, Journal of Power Sources.

[33]  Xiping Song,et al.  A novel material of nanoporous magnesium for hydrogen generation with salt water , 2018, Journal of Power Sources.

[34]  S. Suwas,et al.  Two-pass friction stir welding of aluminum alloy to titanium alloy: A simultaneous improvement in mechanical properties , 2018, Materials Science and Engineering: A.

[35]  N. Birbilis,et al.  Simultaneously improving the corrosion resistance and strength of magnesium via low levels of Zn and Ge additions , 2018, Corrosion Science.

[36]  Franklin Paredes-Trejo,et al.  Assessment of SM2RAIN-Derived and State-of-the-Art Satellite Rainfall Products over Northeastern Brazil , 2018, Remote. Sens..

[37]  Fengzhang Ren,et al.  Investigation of Sodium Phosphate and Sodium Dodecylbenzenesulfonate as Electrolyte Additives for AZ91 Magnesium-Air Battery , 2018 .

[38]  M. Fichtner,et al.  Performance boost for primary magnesium cells using iron complexing agents as electrolyte additives , 2018, Scientific Reports.

[39]  M. Ziehmer,et al.  On a novel strain indicator based on uncorrelated misorientation angles for correlating dislocation density to local strength , 2018 .

[40]  S. Tao,et al.  Origin and Radiative Forcing of Black Carbon Aerosol: Production and Consumption Perspectives. , 2018, Environmental science & technology.

[41]  J. Tavares,et al.  Mechanical Properties and Microstructural Characterization of Aged Nickel-based Alloy 625 Weld Metal , 2018, Metallurgical and Materials Transactions A.

[42]  J. Bi,et al.  Unequal Exchange of Air Pollution and Economic Benefits Embodied in China's Exports. , 2018, Environmental science & technology.

[43]  S. Tao,et al.  Health effects of banning beehive coke ovens and implementation of the ban in China , 2018, Proceedings of the National Academy of Sciences.

[44]  R. Deidda,et al.  Evaluation of Precipitation From EURO‐CORDEX Regional Climate Simulations in a Small‐Scale Mediterranean Site , 2018 .

[45]  H. Jing,et al.  Effect of welding on the corrosion behavior of X65/Inconel 625 in simulated solution , 2018, Welding in the World.

[46]  Ke Ma,et al.  Origin of the Volume Contraction during Nanoporous Gold Formation by Dealloying for High-Performance Electrochemical Applications , 2018 .

[47]  Yuxin Zhang,et al.  Composition optimization and electrochemical properties of Mg-Al-Sn-Mn alloy anode for Mg-air batteries , 2018 .

[48]  P. Voorhees,et al.  On the topological, morphological, and microstructural characterization of nanoporous metals , 2018 .

[49]  A. Karma,et al.  Pattern formation during electrochemical and liquid metal dealloying , 2018 .

[50]  P. Friedlingstein,et al.  The decreasing range between dry- and wet- season precipitation over land and its effect on vegetation primary productivity , 2017, PLoS ONE.

[51]  Yufeng Zheng,et al.  Development of magnesium-based biodegradable metals with dietary trace element germanium as orthopaedic implant applications. , 2017, Acta biomaterialia.

[52]  T. Shepherd,et al.  Towards process-informed bias correction of climate change simulations , 2017 .

[53]  Sviatlana V. Lamaka,et al.  Comprehensive screening of Mg corrosion inhibitors , 2017 .

[54]  Yingwei Song,et al.  Pitting corrosion of a Rare Earth Mg alloy GW93 , 2017 .

[55]  Xi Lu,et al.  Trade-driven relocation of air pollution and health impacts in China , 2017, Nature Communications.

[56]  Ronaldo Müller Huppes,et al.  EFEITO DA VELOCIDADE DE ROTAÇÃO DA FERRAMENTA NA SOLDAGEM POR FRICÇÃO E MISTURA MECÂNICA DA LIGA INCONEL 625 , 2017 .

[57]  S. Hagemann,et al.  Projected climate change impacts in rainfall erosivity over Brazil , 2017, Scientific Reports.

[58]  P. Voorhees,et al.  Analytics on large microstructure datasets using two-point spatial correlations: Coarsening of dendritic structures , 2017 .

[59]  C. Peng,et al.  Microstructure and electrochemical corrosion behavior of extruded Mg–Al–Pb–La alloy as anode for seawater-activated battery , 2017 .

[60]  Binbin Zhang,et al.  Electrochemical behavior of Mg-Al-Zn-In alloy as anode materials in 3.5 wt.% NaCl solution , 2017 .

[61]  Bin Zhao,et al.  Reduction in population exposure to PM2.5 and cancer risk due to PM2.5-bound PAHs exposure in Beijing, China during the APEC meeting. , 2017, Environmental pollution.

[62]  H. Barbosa,et al.  Evaluation of the SMOS-Derived Soil Water Deficit Index as Agricultural Drought Index in Northeast of Brazil , 2017 .

[63]  M. Zheludkevich,et al.  Bioactive plasma electrolytic oxidation coatings on Mg-Ca alloy to control degradation behaviour , 2017 .

[64]  H. Barbosa,et al.  Validating CHIRPS-based satellite precipitation estimates in Northeast Brazil , 2017 .

[65]  M. Brauer,et al.  Transboundary health impacts of transported global air pollution and international trade , 2017, Nature.

[66]  Yifu Shen,et al.  Effect of plunge depth on microstructure and mechanical properties of FSW lap joint between aluminum alloy and nickel-base alloy , 2017 .

[67]  G. Lemos,et al.  Progress in friction stir welding of Ni alloys , 2017 .

[68]  C. C. Silva,et al.  Assessment of microstructure of alloy Inconel 686 dissimilar weld claddings , 2016 .

[69]  Tasawar Hayat,et al.  An overview of mercury emissions by global fuel combustion: The impact of international trade , 2016 .

[70]  M. Ziehmer,et al.  A principle curvatures analysis of the isothermal evolution of nanoporous gold: Quantifying the characteristic length-scales , 2016 .

[71]  C. Kirchlechner,et al.  Analysis of the full stress tensor in a micropillar: Ability of and difficulties arising during synchrotron based μLaue diffraction , 2016 .

[72]  Haewoo Lee,et al.  Effect of Welding Heat Input on Microstructure and Texture of Inconel 625 Weld Overlay Studied Using the Electron Backscatter Diffraction Method , 2016, Metallurgical and Materials Transactions A.

[73]  Ling-Zhi Liu,et al.  Interpreting anomalous low-strength and low-stiffness of nanoporous gold: Quantification of network connectivity , 2016 .

[74]  K. Kowalski,et al.  Analysis of Phase Transformations in Inconel 625 Alloy during Annealing , 2016 .

[75]  A. Porporato,et al.  Vegetation response to rainfall seasonality and interannual variability in tropical dry forests , 2016 .

[76]  M. Ziehmer,et al.  Nanoporous gold: 3D structural analyses of representative volumes and their implications on scaling relations of mechanical behaviour , 2016 .

[77]  Zhiliang Zhang,et al.  A framework for fracture assessments of dissimilar girth welds in offshore pipelines under bending , 2016 .

[78]  J. C. Dutra,et al.  A new approach for MIG/MAG cladding with Inconel 625 , 2016, Welding in the World.

[79]  Longlong Guo.  Effect of Heat Treatment Temperatures on Microstructure and Corrosion Properties of Inconel 625 Weld Overlay Deposited by PTIG , 2016 .

[80]  N. Birbilis,et al.  Controlling the corrosion and cathodic activation of magnesium via microalloying additions of Ge , 2016, Scientific Reports.

[81]  T. Wada,et al.  Evolution of a bicontinuous nanostructure via a solid-state interfacial dealloying reaction , 2016 .

[82]  Carey W. King,et al.  Daily gridded meteorological variables in Brazil (1980–2013) , 2016 .

[83]  Juyoung Kim,et al.  Weakened Flexural Strength of Nanocrystalline Nanoporous Gold by Grain Refinement. , 2016, Nano letters.

[84]  Zaili Ling,et al.  Trend of cancer risk of Chinese inhabitants to dioxins due to changes in dietary patterns: 1980–2009 , 2016, Scientific Reports.

[85]  Tse-Ven Steven Chong,et al.  Effects of elevated temperatures on the mechanical properties of nickel-based alloy clad pipelines girth welds , 2016 .

[86]  S. Lamaka,et al.  The effect of iron re-deposition on the corrosion of impurity-containing magnesium. , 2016, Physical chemistry chemical physics : PCCP.

[87]  J. Markmann,et al.  Nanoporous Gold—Testing Macro-scale Samples to Probe Small-scale Mechanical Behavior , 2016 .

[88]  A. Ramirez,et al.  Microstructural characterisation of friction stir welding joints of mild steel to Ni-based alloy 625 , 2015 .

[89]  M. Mabuchi,et al.  Discharge properties of Mg–Al–Mn–Ca and Mg–Al–Mn alloys as anode materials for primary magnesium–air batteries , 2015 .

[90]  P. Gachon,et al.  On the Remapping Procedure of Daily Precipitation Statistics and Indices Used in Regional Climate Model Evaluation , 2015 .

[91]  B. Scanlon,et al.  Performance evaluation of rainfall estimates by TRMM Multi‐satellite Precipitation Analysis 3B42V6 and V7 over Brazil , 2015 .

[92]  G. Frankel,et al.  Effect of impurities on the enhanced catalytic activity for hydrogen evolution in high purity magnesium , 2015 .

[93]  N. Birbilis,et al.  Corrosion of magnesium alloys: the role of alloying , 2015 .

[94]  M. Brauer,et al.  Revealing the hidden health costs embodied in Chinese exports. , 2015, Environmental science & technology.

[95]  W. Cramer,et al.  Global distribution of observed climate change impacts , 2015 .

[96]  Yoshiaki Morisada,et al.  Dissimilar FSW of immiscible materials: Steel/magnesium , 2015 .

[97]  H. K. Gibbs,et al.  Brazil's Soy Moratorium , 2015, Science.

[98]  J. Robson,et al.  Effect of traces of silicon on the formation of Fe-rich particles in pure magnesium and the corrosion susceptibility of magnesium , 2015 .

[99]  C. Mello,et al.  Assessing the climate change impacts on the rainfall erosivity throughout the twenty-first century in the Grande River Basin (GRB) headwaters, Southeastern Brazil , 2015, Environmental Earth Sciences.

[100]  Diego J. Chagas,et al.  Assessment of Climate Change over South America under RCP 4.5 and 8.5 Downscaling Scenarios , 2014 .

[101]  Diego J. Chagas,et al.  Evaluation of the Eta Simulations Nested in Three Global Climate Models , 2014 .

[102]  C. Peng,et al.  Discharge behaviour of Mg-Al-Pb and Mg-Al-Pb-In alloys as anodes for Mg-air battery , 2014 .

[103]  J. Zuo,et al.  A kinetic Monte Carlo study of coarsening resistance of novel core/shell precipitates , 2014 .

[104]  Wei Li,et al.  Global lung cancer risk from PAH exposure highly depends on emission sources and individual susceptibility , 2014, Scientific Reports.

[105]  D. Goodrich,et al.  Trends in water balance components across the Brazilian Cerrado , 2014 .

[106]  Rana Mohtadi,et al.  Magnesium batteries: Current state of the art, issues and future perspectives , 2014, Beilstein journal of nanotechnology.

[107]  N. Addor,et al.  Bias correction for hydrological impact studies – beyond the daily perspective , 2014 .

[108]  C. Peng,et al.  Research progress of magnesium anodes and their applications in chemical power sources , 2014 .

[109]  R. Vautard,et al.  Regional climate modeling on European scales: a joint standard evaluation of the EURO-CORDEX RCM ensemble , 2014 .

[110]  T. Wada,et al.  Bulk-nanoporous-silicon negative electrode with extremely high cyclability for lithium-ion batteries prepared using a top-down process. , 2014, Nano letters.

[111]  Jun Ni,et al.  Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel , 2014 .

[112]  T. Balk,et al.  Controlled ligament coarsening in nanoporous gold by annealing in vacuum versus nitrogen , 2014 .

[113]  M. Shamanian,et al.  An assessment of microstructure, mechanical properties and corrosion resistance of dissimilar welds between Inconel 718 and 310S austenitic stainless steel , 2014 .

[114]  P. Voorhees,et al.  Application of the level-set method to the analysis of an evolving microstructure , 2014 .

[115]  J. Houghton,et al.  Climate Change 2013 - The Physical Science Basis: Working Group I Contribution to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change , 2014 .

[116]  H. Mao,et al.  Detecting grain rotation at the nanoscale , 2014, Proceedings of the National Academy of Sciences.

[117]  Jun Chen,et al.  Magnesium–air batteries: from principle to application , 2014 .

[118]  S. Davis,et al.  China’s international trade and air pollution in the United States , 2014, Proceedings of the National Academy of Sciences.

[119]  A. Langousis,et al.  Regional climate models' performance in representing precipitation and temperature over selected Mediterranean areas , 2013 .

[120]  Ming Liu,et al.  Impurity control and corrosion resistance of magnesium-aluminum alloy , 2013 .

[121]  Zong‐Liang Yang,et al.  A new dynamical downscaling approach with GCM bias corrections and spectral nudging , 2013 .

[122]  Jie Zheng,et al.  Porous Mg thin films for Mg-air batteries. , 2013, Dalton transactions.

[123]  W. Collins,et al.  Evaluation of climate models , 2013 .

[124]  L. Roesch,et al.  Soil-Borne Bacterial Structure and Diversity Does Not Reflect Community Activity in Pampa Biome , 2013, PloS one.

[125]  D. StJohn,et al.  An Hydrogen Evolution Method for the Estimation of the Corrosion Rate of Magnesium Alloys , 2013 .

[126]  Zhao Zong-ci,et al.  A Review on Evaluation Methods of Climate Modeling , 2013 .

[127]  R. Birringer,et al.  Examination of the energy phase space of mixed copper grain boundaries by EBSD and the sphere-on-a-plate method , 2013 .

[128]  K. Sun,et al.  Global atmospheric emissions of polycyclic aromatic hydrocarbons from 1960 to 2008 and future predictions. , 2013, Environmental science & technology.

[129]  R. Knutti,et al.  Robustness and uncertainties in the new CMIP5 climate model projections , 2013 .

[130]  S. Tao,et al.  Pollution level, inhalation exposure and lung cancer risk of ambient atmospheric polycyclic aromatic hydrocarbons (PAHs) in Taiyuan, China. , 2013, Environmental pollution.

[131]  M. Li,et al.  Electrochemical Behavior of Corrosion Resistance of X65/Inconel 625 Welded Joints , 2013, International Journal of Electrochemical Science.

[132]  Ke Wang,et al.  Composites of Nanoporous Gold and Polymer , 2013, Advanced materials.

[133]  M. Nastasi,et al.  Surface effects on the radiation response of nanoporous Au foams , 2012 .

[134]  A. Kostka,et al.  Friction-stir dissimilar welding of aluminium alloy to high strength steels: Mechanical properties and their relation to microstructure , 2012 .

[135]  P. Paruolo,et al.  Bias correction of the ENSEMBLES high resolution climate change projections for use by impact models: Analysis of the climate change signal , 2012 .

[136]  J. Seibert,et al.  Bias correction of regional climate model simulations for hydrological climate-change impact studies: Review and evaluation of different methods , 2012 .

[137]  A. M. Perez-Marin,et al.  Biogeochemical cycling in terrestrial ecosystems of the Caatinga Biome. , 2012, Brazilian journal of biology = Revista brasleira de biologia.

[138]  A. Atrens,et al.  Corrosion behaviour of a nominally high purity Mg ingot produced by permanent mould direct chill casting , 2012 .

[139]  P. Voorhees,et al.  Structural evolution of nanoporous gold during thermal coarsening , 2012 .

[140]  Karl E. Taylor,et al.  An overview of CMIP5 and the experiment design , 2012 .

[141]  Ju’e Guo,et al.  China’s provincial CO2 emissions embodied in international and interprovincial trade , 2012 .

[142]  Jun Chen,et al.  Metal-air batteries: from oxygen reduction electrochemistry to cathode catalysts. , 2012, Chemical Society reviews.

[143]  E. D. Jong,et al.  On the specific surface area of nanoporous materials , 2011 .

[144]  M. Demkowicz,et al.  Coarsening by network restructuring in model nanoporous gold , 2011 .

[145]  Steven J Davis,et al.  The supply chain of CO2 emissions , 2011, Proceedings of the National Academy of Sciences.

[146]  J. Erlebacher,et al.  Mechanism of coarsening and bubble formation in high-genus nanoporous metals. , 2011, Physical review letters.

[147]  J. Weissmüller,et al.  A Material with Electrically Tunable Strength and Flow Stress , 2011, Science.

[148]  P. Bleuet,et al.  A new white beam x-ray microdiffraction setup on the BM32 beamline at the European Synchrotron Radiation Facility. , 2011, The Review of scientific instruments.

[149]  H. Hasumi,et al.  Improved Climate Simulation by MIROC5: Mean States, Variability, and Climate Sensitivity , 2010, Journal of Climate.

[150]  J. Erlebacher,et al.  Oxygen reduction in nanoporous metal-ionic liquid composite electrocatalysts. , 2010, Nature materials.

[151]  J. Erlebacher,et al.  Structure/processing relationships in the fabrication of nanoporous gold , 2010 .

[152]  W. Landman.  Climate change 2007: the physical science basis , 2010 .

[153]  K. Song,et al.  Effect of precipitation on post-heat-treated Inconel 625 alloy after friction stir welding , 2010 .

[154]  In-Ho Jung,et al.  Thermodynamic modeling of the Mg–Ge–Si, Mg–Ge–Sn, Mg–Pb–Si and Mg–Pb–Sn systems , 2010 .

[155]  S. Davis,et al.  Consumption-based accounting of CO2 emissions , 2010, Proceedings of the National Academy of Sciences.

[156]  P. Voorhees,et al.  Morphology and topology in coarsening of domains via non-conserved and conserved dynamics , 2010 .

[157]  F. C. Vieira,et al.  The Brazilian Pampa: A Fragile Biome , 2009 .

[158]  S. Tao,et al.  Inhalation exposure to ambient polycyclic aromatic hydrocarbons and lung cancer risk of Chinese population , 2009, Proceedings of the National Academy of Sciences.

[159]  C. Eberl,et al.  Tensile and compressive microspecimen testing of bulk nanoporous gold , 2009 .

[160]  T. Baumann,et al.  Surface Chemistry in Nanoscale Materials , 2009, Materials.

[161]  J. Lippold,et al.  Welding Metallurgy and Weldability of Nickel-Base Alloys , 2009 .

[162]  Jun Chen,et al.  Magnesium microspheres and nanospheres: Morphology-controlled synthesis and application in Mg/MnO2 batteries , 2009 .

[163]  Zhonghua Zhang,et al.  Generalized Fabrication of Nanoporous Metals (Au, Pd, Pt, Ag, and Cu) through Chemical Dealloying , 2009 .

[164]  B. Santer,et al.  Selecting global climate models for regional climate change studies , 2009, Proceedings of the National Academy of Sciences.

[165]  P. Voorhees,et al.  The topology and morphology of bicontinuous interfaces during coarsening , 2009 .

[166]  Y. Ivanisenko,et al.  Deforming nanoporous metal: Role of lattice coherency , 2009 .

[167]  Zhonghua Zhang,et al.  Formation and Characterization of Monolithic Nanoporous Copper by Chemical Dealloying of Al−Cu Alloys , 2009 .

[168]  S. Tao,et al.  Global atmospheric emission inventory of polycyclic aromatic hydrocarbons (PAHs) for 2004 , 2009 .

[169]  A. Coy,et al.  Influence of microstructure and composition on the corrosion behaviour of Mg/Al alloys in chloride media , 2008 .

[170]  Y. Tasdemir,et al.  Seasonal concentrations and partitioning of PAHs in a suburban site of Bursa, Turkey. , 2008, Environmental pollution.

[171]  B. Schmitt,et al.  On the microstructure of nanoporous gold: an X-ray diffraction study. , 2008, Nano letters.

[172]  R. Moore,et al.  Rainfall and sampling uncertainties: A rain gauge perspective , 2008 .

[173]  Richard G. Jones,et al.  Regional climate models downscaling analysis of general circulation models present climate biases propagation into future change projections , 2008 .

[174]  Xiaohong Xu,et al.  Research on unsupported nanoporous gold catalyst for CO oxidation , 2007 .

[175]  Mingwei Chen,et al.  Ultrafine nanoporous gold by low-temperature dealloying and kinetics of nanopore formation , 2007 .

[176]  T. Wigley,et al.  Precipitation in Britain: An analysis of area‐average data updated to 1989 , 2007 .

[177]  Cynthia A. Volkert,et al.  Reconstructing a Nanoporous Metal in Three Dimensions: An Electron Tomography Study of Dealloyed Gold Leaf , 2007 .

[178]  J. Schoereder,et al.  Ant communities, environmental characteristics and their implications for conservation in the Brazilian Pantanal , 2007, Biodiversity and Conservation.

[179]  D. Roy,et al.  Large seasonal swings in leaf area of Amazon rainforests , 2007, Proceedings of the National Academy of Sciences.

[180]  J. Christensen,et al.  A summary of the PRUDENCE model projections of changes in European climate by the end of this century , 2007 .

[181]  J. Kysar,et al.  Microfabrication and mechanical properties of nanoporous gold at the nanoscale , 2007 .

[182]  P. Voorhees,et al.  Coarsening of bicontinuous structures via nonconserved and conserved dynamics. , 2007, Physical review. E, Statistical, nonlinear, and soft matter physics.

[183]  D. Eliezer,et al.  The role of Si and Ca on new wrought Mg–Zn–Mn based alloy , 2007 .

[184]  Jun Cao,et al.  Emission of polycyclic aromatic hydrocarbons in China by county. , 2007, Environmental science & technology.

[185]  M. L. Reed,et al.  Mitigation of tensile failure in released nanoporous metal microstructures via thermal treatment , 2006 .

[186]  Jun Chen,et al.  Metallic magnesium nano/mesoscale structures: their shape-controlled preparation and mg/air battery applications. , 2006, Angewandte Chemie.

[187]  W. Junk,et al.  Biodiversity and its conservation in the Pantanal of Mato Grosso, Brazil , 2006, Aquatic Sciences.

[188]  Cynthia A. Volkert,et al.  Approaching the theoretical strength in nanoporous Au , 2006 .

[189]  Thomas R Huser,et al.  Surface-enhanced Raman scattering on nanoporous Au , 2006 .

[190]  J. Erlebacher,et al.  Volume change during the formation of nanoporous gold by dealloying. , 2006, Physical review letters.

[191]  A. Hamza,et al.  Scaling equation for yield strength of nanoporous open-cell foams , 2006 .

[192]  R. Newman,et al.  Synthesis of tough nanoporous metals by controlled electrolytic dealloying , 2006 .

[193]  Axel Voigt,et al.  Surface evolution of elastically stressed films under deposition by a diffuse interface model , 2006, J. Comput. Phys..

[194]  S. Tao,et al.  Emission of polycyclic aromatic hydrocarbons in China. , 2006, Environmental science & technology.

[195]  R. Dickinson,et al.  Rainfall and its seasonality over the Amazon in the 21st century as assessed by the coupled models for the IPCC AR4 , 2006 .

[196]  T. D. Mitchell,et al.  An improved method of constructing a database of monthly climate observations and associated high‐resolution grids , 2005 .

[197]  F. Wakai,et al.  Coarsening and grain growth in sintering of two particles of different sizes , 2005 .

[198]  P. Voorhees,et al.  Three-dimensional morphological characterization of coarsened microstructures , 2005 .

[199]  D. Shoesmith,et al.  Cr, Mo and W alloying additions in Ni and their effect on passivity , 2004 .

[200]  C. Chien,et al.  Fabrication of Nanoporous Nickel by Electrochemical Dealloying , 2004 .

[201]  J. Zak,et al.  Convergence across biomes to a common rain-use efficiency , 2004, Nature.

[202]  H. Hung,et al.  How do climate fluctuations affect persistent organic pollutant distribution in North America? Evidence from a decade of air monitoring. , 2004, Environmental science & technology.

[203]  Jianmin Ma,et al.  Impacts of lindane usage in the Canadian prairies on the Great Lakes ecosystem. 1. Coupled atmospheric transport model and modeled concentrations in air and soil. , 2003, Environmental science & technology.

[204]  H. Gleiter,et al.  Charge-Induced Reversible Strain in a Metal , 2003, Science.

[205]  A. Marder,et al.  Dilution and microsegregation in dissimilar metal welds between super austenitic stainless steel and nickel base alloys , 2002 .

[206]  W. Sombroek.  Spatial and Temporal Patterns of Amazon Rainfall , 2001 .

[207]  A. Karma,et al.  Evolution of nanoporosity in dealloying , 2001, Nature.

[208]  Farid S. Nobari,et al.  The Viable Alternative , 2000 .

[209]  J. Besenhard,et al.  Handbook of Battery Materials , 1998 .

[210]  K. E. Harris,et al.  Grain Rotation in Thin Films of Gold , 1998 .

[211]  H. Gundersen,et al.  Quantification of connectivity in cancellous bone, with special emphasis on 3-D reconstructions. , 1993, Bone.

[212]  F. Giorgi.  Simulation of Regional Climate Using a Limited Area Model Nested in a General Circulation Model , 1990 .

[213]  James H. Brown,et al.  Macroecology: The Division of Food and Space Among Species on Continents , 1989, Science.

[214]  A. A. Nayeb-Hashemi,et al.  The Ge-Mg (Germanium-Magnesium) system , 1984 .

[215]  V. Kousky.  Diurnal Rainfall Variation in Northeast Brazil , 1980 .

[216]  H. Gleiter,et al.  Investigation of low energy grain boundaries in metals by a sintering technique , 1976 .

[217]  H. Muchnic.  An improved climate , 1975 .

[218]  M. Straumanis,et al.  Disintegration of Magnesium While Dissolving Anodically in Neutral and Acidic Solutions , 1963 .

[219]  G. Marsh,et al.  The Difference Effect and the Chunk Effect , 1960 .

[220]  W. Mullins.  Theory of Thermal Grooving , 1957 .

[221]  Conyers Herring,et al.  Effect of Change of Scale on Sintering Phenomena , 1950 .

[222]  Thomas M. Johnson,et al.  To T. C. , 1936 .

[223]  Torsten Schmiermund.  J, K , 2021, Fachwörterbuch Feuerwehr und Brandschutz.

[224]  J. S,et al.  Argon and argon-hydrogen shielding gas effects on the laves phase formation and corrosion behavior of Inconel 718 gas tungsten arc welds , 2019, Journal of Materials Processing Technology.

[225]  G. Lemos,et al.  Effect of welding speed on friction stir welds of GL E36 shipbuilding steel , 2019, Journal of Materials Research and Technology.

[226]  W. Hager,et al.  and s , 2019, Shallow Water Hydraulics.

[227]  V. Utgikar,et al.  Mg-RE Alloy Anode Materials for Mg-Air Battery Application , 2019, Journal of The Electrochemical Society.

[228]  N. Birbilis,et al.  Reducing the corrosion rate of magnesium via microalloying additions of group 14 and 15 elements , 2018 .

[229]  Xin-bo Zhang.  High energy density metal-air batteries , 2018 .

[230]  Huimin Lu,et al.  Performance of Mg–9Al–1In Alloy as Anodes for Mg-Air Batteries in 3.5 wt% NaCl Solutions , 2017 .

[231]  Ri-chu Wang,et al.  Effect of Al and Pb Contents on the Corrosion Electrochemical Properties and Activation of Mg-Al-Pb Alloy Anode , 2017 .

[232]  Kaixiong Hu.  Micromechanical and three-dimensional microstructural characterization of nanoporous gold-epoxy composites , 2017 .

[233]  S. Lamaka,et al.  A new concept for corrosion inhibition of magnesium: Suppression of iron re-deposition , 2016 .

[234]  Wei Zhang,et al.  Electrochemical Performance of Mg-3Al Modified with Ga, In and Sn as Anodes for Mg-Air Battery , 2016 .

[235]  Michael Selzer,et al.  Multiscale simulations on the coarsening of Cu-rich precipitates in α-Fe using kinetic monte carlo, molecular dynamics, and phase-field simulations , 2016 .

[236]  Yvonne Freeh,et al.  Handbook Of Batteries , 2016 .

[237]  N. Birbilis,et al.  The influence of arsenic alloying on the localised corrosion behaviour of magnesium , 2016 .

[238]  DanielMoran.  Tracing global supply chains to air pollution hotspots , 2016 .

[239]  Z. Fan,et al.  Corrosion Behavior of Pure Magnesium with Low Iron Content in 3.5 wt% NaCl Solution , 2015 .

[240]  J. Laird,et al.  Nuclear Microprobe Analysis for Determination of Element Enrichment Following Magnesium Dissolution , 2015 .

[241]  N. Birbilis,et al.  Evidence of the Enrichment of Transition Metal Elements on Corroding Magnesium Surfaces Using Rutherford Backscattering Spectrometry , 2015 .

[242]  M. E. Ferreira,et al.  Pervasive transition of the Brazilian land-use system , 2014 .

[243]  Nurul Sa’aadah Sulaiman,et al.  Third Party Damages of Offshore Pipeline , 2014 .

[244]  G. Song,et al.  Transmission Electron Microscopy Study of Aqueous Film Formation and Evolution on Magnesium Alloys , 2014 .

[245]  Geraint Williams,et al.  Poisoning the corrosion of magnesium , 2013 .

[246]  Cuie Wen,et al.  High Energy Density Metal-Air Batteries: A Review , 2013 .

[247]  Wgi.  SBSTA-IPCC Special Event Climate Change 2013: The Physical Science Basis , 2013 .

[248]  S. A. Mousavi,et al.  Comparison of corrosion behavior between fusion cladded and explosive cladded Inconel 625/plain carbon steel bimetal plates , 2013 .

[249]  A. Wu,et al.  Defects and the properties of the dissimilar materials FSW joints of titanium alloy TC4 with aluminum alloy 6061 , 2013 .

[250]  Y. Park,et al.  Influence of Addition of Ge on the Microstructure and Corrosion Properties of Magnesium , 2012 .

[251]  Lin Peng,et al.  Correlation between the Concentration of Aromatic Hydrocarbons and BaP from Coke Oven Fugitive Emissions in Shanxi, China , 2012 .

[252]  S. Josey.  Climate change impacts , 2012 .

[253]  W. Marsden.  I and J , 2012 .

[254]  L. Leung.  Regional Climate Models , 2012 .

[255]  A. Atrens,et al.  An innovative specimen configuration for the study of Mg corrosion , 2011 .

[256]  A. Kaisheva,et al.  Environmentally-clean Mg-air electrochemical power sources , 2011 .

[257]  冯艳,et al.  Influence of aluminium and lead on activation of magnesium as anode , 2010 .

[258]  T. Wilbanks,et al.  Contribution of Working Group II to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change , 2007 .

[259]  S. Banerjee,et al.  Carbide Precipitation in Nickel Base Superalloys 718 and 625 and Their Effect on Mechanical Properties , 1997 .

[260]  C. Donald Ahrens,et al.  Essentials of Meteorology: An Invitation to the Atmosphere , 1993 .

[261]  Panel on Coastal Meteorology.  Coastal meteorology : a review of the state of the science , 1992 .

[262]  B. Ratnakumar.  Passive films on magnesium anodes in primary batteries , 1988 .

[263]  W. Mills.  Effect of Heat Treatment on the Tensile and Fracture Toughness Behavior of Alloy 718 Weldments , 1984 .

[264]  R Harkov,et al.  Health effects. , 1980, Journal of the Air Pollution Control Association.

[265]  Giorgio Piccaluga,et al.  X-ray diffraction study of a , 1977 .

[266]  G. Porod.  Die Röntgenkleinwinkelstreuung von dichtgepackten kolloiden Systemen , 1953 .

[267]  I. Miyazaki,et al.  AND T , 2022 .