A Diagnostic Approach to Assess the Effect of Temperature Stratification on the Combustion Modes of Gasoline Surrogates

[1]  C. Sung,et al.  Effect of nitric oxide and exhaust gases on gasoline surrogate autoignition: iso-octane experiments and modeling , 2022, Combustion and Flame.

[2]  Lei Zhou,et al.  Experimental observation of end-gas autoignition and developing detonation in a confined space using gasoline fuel , 2020 .

[3]  H. Terashima,et al.  Effects of Globally Stratified Temperature Distributions and NTC Characteristics on End-gas Combustion Modes , 2020, Combustion Science and Technology.

[4]  W. Pitz,et al.  Autoignition behavior of gasoline/ethanol blends at engine-relevant conditions , 2020, Combustion and Flame.

[5]  S. Karimkashi,et al.  A numerical study on combustion mode characterization for locally stratified dual-fuel mixtures , 2020, Combustion and Flame.

[6]  S. M. Sarathy,et al.  Chemical Ignition Characteristics of Ethanol Blending with Primary Reference Fuels , 2019, Energy & Fuels.

[7]  V. Vuorinen,et al.  Modeling cycle-to-cycle variations in spark ignited combustion engines by scale-resolving simulations for different engine speeds , 2019, Applied Energy.

[8]  Y. Wright,et al.  Flow and thermal field effects on cycle-to-cycle variation of combustion: scale-resolving simulation in a spark ignited simplified engine configuration , 2018, Applied Energy.

[9]  O. Kaario,et al.  Large-eddy simulation on the influence of injection pressure in reacting Spray A , 2018 .

[10]  Aamir Farooq,et al.  Recent progress in gasoline surrogate fuels , 2018 .

[11]  Jacqueline H. Chen,et al.  The structure and propagation of laminar flames under autoignitive conditions , 2018 .

[12]  Jihad Badra,et al.  Autoignition characteristics of oxygenated gasolines , 2017 .

[13]  R. Sankaran,et al.  On the effect of injection timing on the ignition of lean PRF/air/EGR mixtures under direct dual fuel stratification conditions , 2017 .

[14]  R. Reitz,et al.  Knocking combustion in spark-ignition engines , 2017 .

[15]  D. Splitter,et al.  Pressure and temperature effects on fuels with varying octane sensitivity at high load in SI engines , 2017 .

[16]  Kyle E. Niemeyer,et al.  pyJac: Analytical Jacobian generator for chemical kinetics , 2016, Comput. Phys. Commun..

[17]  Luke Bates,et al.  Engine Hot Spots: Modes of Auto-ignition and Reaction Propagation , 2016 .

[18]  S. M. Sarathy,et al.  A methodology to relate octane numbers of binary and ternary n-heptane, iso-octane and toluene mixtures with simulated ignition delay times , 2015 .

[19]  Zhi Wang,et al.  Analysis of pre-ignition to super-knock: Hotspot-induced deflagration to detonation , 2015 .

[20]  E. Ranzi,et al.  Reduced Kinetic Schemes of Complex Reaction Systems: Fossil and Biomass‐Derived Transportation Fuels , 2014 .

[21]  Mingfa Yao,et al.  Development of a Reduced Primary Reference Fuel Mechanism for Internal Combustion Engine Combustion Simulations , 2013 .

[22]  Tianfeng Lu,et al.  Direct numerical simulations of the ignition of lean primary reference fuel/air mixtures with temperature inhomogeneities , 2013 .

[23]  C. Law,et al.  Hierarchical and comparative kinetic modeling of laminar flame speeds of hydrocarbon and oxygenated fuels , 2012 .

[24]  William J. Pitz,et al.  An Approach for Formulating Surrogates for Gasoline with Application toward a Reduced Surrogate Mechanism for CFD Engine Modeling , 2011 .

[25]  Tianfeng Lu,et al.  Direct numerical simulations of ignition of a lean n-heptane/air mixture with temperature inhomogeneities at constant volume: Parametric study , 2011 .

[26]  Tiziano Faravelli,et al.  Kinetic Modeling of the Oxidation of Ethanol and Gasoline Surrogate Mixtures , 2010 .

[27]  N. Peters,et al.  Laminar burning velocities at high pressure for primary reference fuels and gasoline: Experimental and numerical investigation , 2009 .

[28]  Robert L. Gordon,et al.  Transport budgets in turbulent lifted flames of methane autoigniting in a vitiated co-flow , 2007 .

[29]  Philippe Pierre Pebay,et al.  Direct numerical simulation of ignition front propagation in a constant volume with temperature inhomogeneities. II. Parametric study , 2006 .

[30]  H. Im,et al.  Direct numerical simulation of ignition front propagation in a constant volume with temperature inhomogeneities: I. Fundamental analysis and diagnostics , 2006 .

[31]  Ronald K. Hanson,et al.  Shock tube determination of ignition delay times in full-blend and surrogate fuel mixtures , 2004 .

[32]  Hrvoje Jasak,et al.  A tensorial approach to computational continuum mechanics using object-oriented techniques , 1998 .

[33]  Y. Zeldovich,et al.  Regime classification of an exothermic reaction with nonuniform initial conditions , 1980 .

[34]  O. Kaario,et al.  Large-eddy simulation of dual-fuel ignition: Diesel spray injection into a lean methane-air mixture , 2019, Combustion and Flame.

[35]  Suk Ho Chung,et al.  Relating the octane numbers of fuels to ignition delay times measured in an ignition quality tester (IQT) , 2017 .

[36]  E. Ranzi,et al.  Skeletal mechanism reduction through species-targeted sensitivity analysis , 2016 .

[37]  Y. Ju,et al.  Numerical experiments on reaction front propagation in n-heptane/air mixture with temperature gradient , 2015 .

[38]  Roda Bounaceur,et al.  Laminar burning velocity of gasolines with addition of ethanol , 2014 .

[39]  Tianfeng Lu,et al.  A DNS study of ignition characteristics of a lean iso-octane/air mixture under HCCI and SACI conditions , 2013 .

[40]  Mauro Valorani,et al.  Analysis of n-heptane auto-ignition characteristics using computational singular perturbation , 2013 .

[41]  C. Westbrook,et al.  Kinetic modeling of gasoline surrogate components and mixtures under engine conditions , 2011 .

[42]  Paul Roth,et al.  Autoignition of gasoline surrogates mixtures at intermediate temperatures and high pressures , 2008 .

[43]  Hong G. Im,et al.  The effects of non-uniform temperature distribution on the ignition of a lean homogeneous hydrogen–air mixture , 2005 .