European alternatives to design perforated thin-walled cold-formed beam-columns for steel storage systems
暂无分享,去创建一个
[1] C. Pacoste,et al. Co-rotational beam elements with warping effects in instability problems , 2002 .
[2] Cristopher D. Moen,et al. Direct Strength Design of Cold-Formed Steel Members with Perforations , 2008 .
[3] Sándor Ádány,et al. Flexural buckling of simply-supported thin-walled columns with consideration of membrane shear deformations: Analytical solutions based on shell model , 2014 .
[4] Claudio Bernuzzi,et al. Warping influence on the resistance of uprights in steel storage pallet racks , 2014 .
[5] R. Emre Erkmen,et al. Shear deformable hybrid finite-element formulation for buckling analysis of thin-walled members , 2014 .
[6] Claudio Bernuzzi,et al. Warping influence on the static design of unbraced steel storage pallet racks , 2014 .
[7] Dan Dubina,et al. Recent research advances on the ECBL approach. Part II: interactive buckling of perforated sections , 2004 .
[8] Ben Young,et al. Local-Distortional Interaction in Cold-formed Steel Rack-Section Columns , 2014 .
[9] Sebastián P. Machado. Interaction of combined loads on the lateral stability of thin-walled composite beams , 2010 .
[10] Jean-Pierre Jaspart,et al. Rules for member stability in EN 1993-1-1 background documentation and design guidelines , 2006 .
[11] A. Nazmy,et al. Elasto-plastic buckling of perforated plates under uniaxial compression , 2004 .
[12] N. E. Shanmugam,et al. Design formula for axially compressed perforated plates , 1999 .
[13] J. A. Dourakopoulos,et al. Flexural–torsional postbuckling analysis of beams of arbitrary cross section , 2009 .
[14] Mihai Nedelcu. Buckling mode identification of perforated thin-walled members by using GBT and shell FEA , 2014 .
[15] J. Bonada,et al. Linear buckling analysis of perforated steel storage rack columns with the Finite Strip Method , 2012 .
[16] Kuo Mo Hsiao,et al. Co-rotational finite element formulation for thin-walled beams with generic open section , 2006 .
[17] Afsin Saritas. Modeling of inelastic behavior of curved members with a mixed formulation beam element , 2009 .
[18] R. E. Fatmi,et al. Non-uniform warping including the effects of torsion and shear forces. Part I: A general beam theory , 2007 .
[19] Kim J.R. Rasmussen,et al. Geometric nonlinear isoparametric spline finite strip analysis of perforated thin-walled structures , 2009 .
[20] James Rhodes. Design of cold formed steel members , 1991 .
[21] V. Vlasov. Thin-walled elastic beams , 1961 .
[22] N. E. Shanmugam,et al. Design for openings in equal-angle cold-formed steel stub columns , 2001 .
[23] Claudio Bernuzzi,et al. European design approaches for isolated cold-formed thin-walled beam–columns with mono-symmetric cross-section , 2015 .
[24] N. E. Shanmugam,et al. Design for openings in cold-formed steel channel stub columns , 2001 .
[25] Cristopher D. Moen,et al. Elastic buckling of thin plates with holes in compression or bending , 2009 .
[26] Kuo Mo Hsiao,et al. A co-rotational formulation for thin-walled beams with monosymmetric open section , 2000 .
[27] Josip Brnić,et al. Large rotation analysis of elastic thin-walled beam-type structures using ESA approach , 2003 .
[28] Lip H. Teh,et al. Cubic beam elements in practical analysis and design of steel frames , 2001 .
[29] Frans S.K. Bijlaard,et al. The “general method” for assessing the out‐of‐plane stability of structural members and frames and the comparison with alternative rules in EN 1993 — Eurocode 3 — Part 1‐1 , 2010 .
[30] R. Nascimbene,et al. Towards Non–Standard Numerical Modeling of Thin-Shell Structures: Geometrically Linear Formulation , 2014 .
[31] Gregory J. Hancock,et al. Steel Storage Racking , 2001 .
[32] S. Timoshenko. Theory of Elastic Stability , 1936 .
[33] Luís Simões da Silva,et al. Design of Steel Structures: Eurocode 3: Design of Steel Structures, Part 1-1: General Rules and Rules for Buildings , 2010 .
[34] Michel Potier-Ferry,et al. Lateral buckling of thin-walled beam-column elements under combined axial and bending loads , 2008 .