Investigation and Improvement of Thermal Stability of a Chromatic Confocal Probe with a Mode-Locked Femtosecond Laser Source

An intentional investigation on the thermal stability of a mode-locked femtosecond laser chromatic confocal probe, which is a critical issue for the probe to be applied for long-term displacement measurement or surface profile measurement requiring long-time scanning, is carried out. At first, the thermal instability of the first prototype measurement setup is evaluated in experiments where the existence of a considerably large thermal instability is confirmed. Then the possible reasons for the thermal instability of the measurement setup are analyzed quantitatively, such as the thermal instability of the refractive index of the confocal lens and the thermal expansion of mechanical jigs employed in the probe. It is verified that most of the thermal instability of the measurement setup is caused by the thermal expansion of mechanical jigs in the probe. For the improvement of the thermal stability of the probe, it is necessary to employ a low thermal expansion material for the mechanical jigs in the measurement setup and to shorten the optical path length of the laser beam. Based on the analysis result, a second prototype probe is newly designed and constructed. The improved thermal stability of the second prototype probe is verified through theoretical calculations and experiments.

[1]  Wei Gao,et al.  A Method for Expansion of Z-Directional Measurement Range in a Mode-Locked Femtosecond Laser Chromatic Confocal Probe , 2019 .

[2]  Chi Fai Cheung,et al.  On-machine and in-process surface metrology for precision manufacturing , 2019, CIRP Annals.

[3]  Yoon-Soo Jang,et al.  Distance Measurements Using Mode-Locked Lasers: A Review , 2018 .

[4]  Guan-Yu Zhuo,et al.  Chromatic confocal microscopy to rapidly reveal nanoscale surface/interface topography by position-sensitive detection , 2018, Applied Physics Letters.

[5]  Andreas Fischer,et al.  Geometry Measurement of Submerged Metallic Micro-Parts Using Confocal Fluorescence Microscopy , 2018, Nanomanufacturing and Metrology.

[6]  Wei Gao,et al.  A chromatic confocal probe with a mode-locked femtosecond laser source , 2018, Optics & Laser Technology.

[7]  Tao Sun,et al.  Non-contact on-machine measurement using a chromatic confocal probe for an ultra-precision turning machine , 2017 .

[8]  Liang-Chia Chen,et al.  Precise optical surface profilometry using innovative chromatic differential confocal microscopy. , 2016, Optics letters.

[9]  William T. Estler,et al.  Measurement technologies for precision positioning , 2015 .

[10]  S. Bettoni,et al.  Chromatic confocal setup for displacement measurement using a supercontinuum light source , 2013 .

[11]  Hongki Yoo,et al.  Chromatic confocal microscopy with a novel wavelength detection method using transmittance. , 2013, Optics express.

[12]  D. Luo,et al.  Fiber-based chromatic confocal microscope with Gaussian fitting method , 2012 .

[13]  V. Gopalan,et al.  Chromatic second harmonic imaging. , 2010, Optics express.

[14]  Improved differential confocal microscopy with ultrahigh signal-to-noise ratio and reflectance disturbance resistibility. , 2009, Applied optics.

[15]  D. Gweon,et al.  Three-dimensional surface profile measurement using a beam scanning chromatic confocal microscope. , 2009, The Review of scientific instruments.

[16]  Ke Si,et al.  The divided aperture technique for microscopy through scattering media. , 2008, Optics express.

[17]  Shizhuo Yin,et al.  Wavelength division multiplexed confocal microscopy using supercontinuum , 2006 .

[18]  Tijani Gharbi,et al.  Chromatic confocal microscopy by means of continuum light generated through a standard single-mode fibre , 2004 .

[19]  Yuichi Okazaki,et al.  Precision nano-fabrication and evaluation of a large area sinusoidal grid surface for a surface encoder , 2003 .

[20]  H. Haus.  Mode-locking of lasers , 2000, IEEE Journal of Selected Topics in Quantum Electronics.

[21]  Y Fainman,et al.  Diffractive lenses for chromatic confocal imaging. , 1997, Applied optics.

[22]  T. Wilson,et al.  Rigorous theory for axial resolution in confocal microscopes , 1997 .

[23]  G. Ghosh,et al.  Sellmeier coefficients and dispersion of thermo-optic coefficients for some optical glasses. , 1997, Applied optics.

[24]  P. Ciddor.  Refractive index of air: new equations for the visible and near infrared. , 1996, Applied optics.

[25]  H. Tiziani,et al.  Three-dimensional image sensing by chromatic confocal microscopy. , 1994, Applied optics.

[26]  Confocal profilometer with nanometric vertical resolution , 1993 .

[27]  T. G. Hodgkinson,et al.  Novel optical frequency comb synthesis using optical feedback , 1990 .

[28]  A. Shaw.  Dimensional Stability of Materials Useful in Optical Engineering , 1986 .

[29]  T. Wilson,et al.  Imaging properties and applications of scanning optical microscopes , 1980 .

[30]  J. W. Berthold Iii,et al.  Ultraprecise thermal expansion measurements of seven low expansion materials. , 1976, Applied optics.