A Vectorial Analysis of the Curvature Sensor Based on a Dual-Core Photonic Crystal Fiber

A novel curvature sensor was proposed based on a dual-core photonic crystal fiber (PCF) that was spliced between two single-mode fibers (SMFs). The sensor sensitivity was investigated both analytically and experimentally, and the influence of the PCF length and temperature on the sensor performance was also analyzed. The results showed the sensor had different sensitivity with different bending direction and its highest sensitivity can reach 10.14 nm/m−1. It also showed great insensitivity to temperature interference. Being of simple structure and good mechanical strength, this curvature sensor has great application potential in various fields, such as architecture, machinery, robot, wearable sensor, and so on.

[2]  Xue Zhou,et al.  Simultaneous Measurement of Electric Field and Strain With a Tandem-Interferometric Device , 2018, IEEE Transactions on Instrumentation and Measurement.

[3]  Libo Yuan,et al.  Highly Sensitive Vector Curvature Sensor Based on Two Juxtaposed Fiber Michelson Interferometers With Vernier-Like Effect , 2019, IEEE Sensors Journal.

[4]  Xinyong Dong,et al.  Polarization-dependent curvature sensor based on an in-fiber Mach-Zehnder interferometer with a difference arithmetic demodulation method. , 2012, Optics express.

[5]  Roger Haynes,et al.  Long period grating in multicore optical fiber: an ultra-sensitive vector bending sensor for low curvatures. , 2014, Optics letters.

[6]  Yong Zhao,et al.  High-sensitivity Sagnac-interferometer biosensor based on exposed core microstructured optical fiber , 2018, Sensors and Actuators B: Chemical.

[7]  Bo Dong,et al.  Temperature insensitive curvature measurement with a core-offset polarization maintaining photonic crystal fiber based interferometer , 2011 .

[8]  Elfed Lewis,et al.  A Curvature Sensor Based on Twisted Single-Mode–Multimode–Single-Mode Hybrid Optical Fiber Structure , 2017, Journal of Lightwave Technology.

[9]  Joseba Zubia,et al.  Photonic crystal fiber interferometric vector bending sensor. , 2015, Optics letters.

[10]  Weihong Bi,et al.  Temperature Insensitive Vector Bending Sensor Based on Asymmetrical Cascading SMF-PCF-SMF Structure , 2017, IEEE Photonics Journal.

[11]  A. Frizera-Neto,et al.  Hysteresis compensation technique applied to polymer optical fiber curvature sensor for lower limb exoskeletons , 2017 .

[12]  L. Nguyen,et al.  Simultaneous Measurement of Temperature and Refractive Index Using an Exposed Core Microstructured Optical Fiber , 2020, IEEE Journal of Selected Topics in Quantum Electronics.

[13]  Ming Ding,et al.  High Sensitivity Curvature Sensor With Intensity Demodulation Based on Single-Mode-Tapered Multimode–Single-Mode Fiber , 2018, IEEE Sensors Journal.

[14]  Tonglei Cheng,et al.  Magnetic Field Sensing Based on SPR Optical Fiber Sensor Interacting With Magnetic Fluid , 2019, IEEE Transactions on Instrumentation and Measurement.

[15]  Qi Wang,et al.  Optical fiber curvature sensor based on MMF-SCF-MMF structure , 2018, Optical Fiber Technology.

[16]  Baldemar Ibarra-Escamilla,et al.  Adaptable Optical Fiber Displacement-Curvature Sensor Based on a Modal Michelson Interferometer with a Tapered Single Mode Fiber , 2017, Sensors.

[17]  Fan Yang,et al.  A highly sensitive optical fiber strain sensor based on cascaded multimode fiber and photonic crystal fiber , 2019, Optical Fiber Technology.

[18]  Changyuan Yu,et al.  High Sensitivity Optical Fiber Curvature Sensor Based on Cascaded Fiber Interferometer , 2018, Journal of Lightwave Technology.

[19]  Heike Ebendorff-Heidepriem,et al.  Optical Fiber Refractive Index Sensor With Low Detection Limit and Large Dynamic Range Using a Hybrid Fiber Interferometer , 2019, Journal of Lightwave Technology.

[20]  Soong Ho Um,et al.  Ultra-high curvature sensors for multi-bend structures using fiber Bragg gratings. , 2019, Optics express.

[21]  Ruikai Xue,et al.  Cost-Effective Optical Fiber Curvature Sensor With Ultrahigh Sensitivity Based on Two Microcollapses in Silica Capillary , 2018, IEEE Photonics Journal.

[22]  Ricardo Oliveira,et al.  Bragg gratings in surface-core fibers: Refractive index and directional curvature sensing , 2017 .

[23]  Yong Zhao,et al.  Multi-modes interferometer for magnetic field and temperature measurement using Photonic crystal fiber filled with magnetic fluid , 2018 .

[24]  Salvador Sales,et al.  Measurement uncertainty of multicore optical fiber sensors used to sense curvature and bending direction , 2019, Measurement.

[25]  Xinyong Dong,et al.  Fiber curvature sensor based on Mach–Zehnder interferometer using up‐taper cascaded long‐period grating , 2016 .

[26]  Chunyu Liu,et al.  Single Modal Interference-Based Fiber-Optic Sensor for Simultaneous Measurement of Curvature and Strain With Dual-Differential Temperature Compensation , 2018, IEEE Sensors Journal.

[27]  A. Meldrum,et al.  Ultimate resolution for refractometric sensing with whispering gallery mode microcavities. , 2012, Optics express.

[28]  Deming Liu,et al.  Single hole twin eccentric core fiber sensor based on anti-resonant effect combined with inline Mach-Zehnder interferometer. , 2017, Optics express.

[29]  Kai Ni,et al.  Temperature-independent curvature sensor based on tapered photonic crystal fiber interferometer , 2012 .

[30]  Shun Wang,et al.  An inline fiber curvature sensor based on anti-resonant reflecting guidance in silica tube , 2019, Optics & Laser Technology.