Cost-exergy optimisation of linear Fresnel reflectors

This paper presents a new method for the optimisation of the mirror element spacing arrangement and operating temperature of linear Fresnel reflectors (LFR). The specific objective is to maximise available power output (i.e. exergy) and operational hours whilst minimising cost. The method is described in detail and compared to an existing design method prominent in the literature. Results are given in terms of the exergy per total mirror area (W/m2) and cost per exergy (US $/W). The new method is applied principally to the optimisation of an LFR in Gujarat, India, for which cost data have been gathered. It is recommended to use a spacing arrangement such that the onset of shadowing among mirror elements occurs at a transversal angle of 45°. This results in a cost per exergy of 2.3 $/W. Compared to the existing design approach, the exergy averaged over the year is increased by 9% to 50 W/m2 and an additional 122 h of operation per year are predicted. The ideal operating temperature at the surface of the absorber tubes is found to be 300 °C. It is concluded that the new method is an improvement over existing techniques and a significant tool for any future design work on LFR systems

[1]  Panna Lal Singh,et al.  Thermal performance of linear Fresnel reflecting solar concentrator with trapezoidal cavity absorbers , 2010 .

[2]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[3]  G. D. Sootha,et al.  A comparative study of optical designs and solar flux concentrating characteristics of a linear fresnel reflector solar concentrator with tubular absorber , 1994 .

[4]  K R Williams,et al.  Power from the sun , 1979 .

[5]  Gitanjali Yadav,et al.  Performance study of a linear Fresnel concentrating solar device , 1999 .

[6]  Tara C. Kandpal,et al.  Optical design and concentration characteristics of linear Fresnel reflector solar concentrators—I. Mirror elements of varying width , 1991 .

[7]  Panna Lal Singh,et al.  Heat loss study of trapezoidal cavity absorbers for linear solar concentrating collector , 2010 .

[8]  Ibrahim Dincer,et al.  EXERGY ANALYSIS OF RENEWABLE ENERGY SYSTEMS , 2013 .

[9]  O. García-Valladares,et al.  Numerical simulation of a Linear Fresnel Reflector Concentrator used as direct generator in a Solar-GAX cycle , 2010 .

[10]  Daniel Feuermann,et al.  Analysis of a two-stage linear Fresnel reflector solar concentrator , 1991 .

[11]  S. C. Kaushik,et al.  Exergy analysis and parametric study of concentrating type solar collectors , 2007 .

[12]  Soteris A. Kalogirou,et al.  Solar thermal collectors and applications , 2004 .

[13]  S. C. Kaushik,et al.  Exergetic analysis of a solar thermal power system , 2000 .

[14]  W. R. McIntire.  Factored approximations for biaxial incident angle modifiers , 1982 .

[15]  Christopher J. Koroneos,et al.  Exergy analysis of renewable energy sources , 2003 .

[16]  D. Mills.  Advances in solar thermal electricity technology , 2004 .

[17]  E. Wäckelgård,et al.  Angular solar absorptance and incident angle modifier of selective absorbers for solar thermal collectors , 2000 .

[18]  Armando C. Oliveira,et al.  Numerical simulation of a trapezoidal cavity receiver for a linear Fresnel solar collector concentrator , 2011 .

[19]  S. C. Kaushik,et al.  Exergy analysis and investigation for various feed water heaters of direct steam generation solar–thermal power plant , 2010 .

[20]  D. Buie,et al.  The effect of circumsolar radiation on a solar concentrating system , 2004 .

[21]  T. Muneer.  Solar radiation and daylight models , 2004 .

[22]  Tara C. Kandpal,et al.  Geometrical designs and performance analysis of a linear fresnel reflector solar concentrator with a flat horizontal absorber , 1990 .

[23]  P. Dey,et al.  Which is the best solar thermal collection technology for electricity generation in north-west India , 2010 .

[24]  G. Morrison,et al.  Compact Linear Fresnel Reflector solar thermal powerplants , 2000 .