Modeling of Thermal Mass in a Small Commercial Building and Potential Improvement by Applying TABS

With a resistor-capacitor model built in Matlab/Simulink, the role of envelope/interior thermal mass (eTM/iTM) in a small commercial building is investigated systematically. It concludes that light-weight concrete is a little worse than normal-weight concrete but much better than wood as eTM or iTM for controlling operative temperature variation in the building. In order to combine the advantages of radiant cooling/heating with the heat storage of massive building structure, an attractive technique called TABS (thermally activated building systems) is applied to the building to investigate the potential improvement. Simulations demonstrate that TABS can keep the operative temperature level around the comfort zone with small variations. As TABS is a low-temperature heating and high-temperature cooling technique, it suggests that natural energy gradient driven low-power equipment, such as cooling tower and rooftop solar thermal panels, can be used to achieve free cooling/heating combining photovoltaics.

[1]  Lin-Shu Wang,et al.  A study of building envelope and thermal mass requirements for achieving thermal autonomy in an office building , 2014 .

[2]  Tim Weber,et al.  Validation of a FEM-program (frequency-domain) and a simplified RC-model (time-domain) for thermally activated building component systems (TABS) using measurement data , 2005 .

[3]  A.W.M. van Schijndel,et al.  Reducing peak requirements for cooling by using thermally activated building systems , 2010 .

[4]  Yaolin Lin,et al.  Coupling of thermal mass and natural ventilation in buildings , 2008 .

[5]  Lin-Shu Wang,et al.  Modeling of hydronic radiant cooling of a thermally homeostatic building using a parametric cooling tower , 2014 .

[6]  Gregor P. Henze,et al.  Impact of adaptive comfort criteria and heat waves on optimal building thermal mass control , 2007 .

[7]  Jonathan A. Wright,et al.  A ventilated slab thermal storage system model , 1998 .

[8]  Shengwei Wang,et al.  Parameter estimation of internal thermal mass of building dynamic models using genetic algorithm , 2006 .

[9]  David Mwale Ogoli,et al.  Predicting indoor temperatures in closed buildings with high thermal mass , 2003 .

[10]  Viktor Dorer,et al.  Control of thermally activated building systems (TABS) in intermittent operation with pulse width modulation , 2009 .

[11]  lin-shu wang,et al.  Effective heat capacity of interior planar thermal mass (iPTM) subject to periodic heating and cooling , 2012 .

[12]  Tim Weber,et al.  An optimized RC-network for thermally activated building components , 2005 .

[13]  Edward Ng,et al.  Effect of envelope colour and thermal mass on indoor temperatures in hot humid climate , 2005 .

[14]  Frauke Oldewurtel,et al.  Experimental analysis of model predictive control for an energy efficient building heating system , 2011 .

[15]  Yaolin Lin,et al.  A new virtual sphere method for estimating the role of thermal mass in natural ventilated buildings , 2011 .

[16]  Viktor Dorer,et al.  Control of thermally-activated building systems (TABS) , 2008 .

[17]  Max Jacobson,et al.  A Pattern Language: Towns, Buildings, Construction , 1981 .

[18]  S. A. Al-Sanea,et al.  Improving thermal performance of building walls by optimizing insulation layer distribution and thickness for same thermal mass , 2011 .

[19]  Harry J. Sauer,et al.  Principles of Heating, Ventilating and Air Conditioning , 1993 .

[20]  Eduardo L. Krüger,et al.  Effectiveness of indirect evaporative cooling and thermal mass in a hot arid climate , 2010 .

[21]  Ambrose Dodoo,et al.  Effect of thermal mass on life cycle primary energy balances of a concrete- and a wood-frame building , 2012 .

[22]  Viktor Dorer,et al.  Application range of thermally activated building systems tabs , 2007 .

[23]  Lin-Shu Wang,et al.  Modeling of TABS-based thermally manageable buildings in Simulink , 2013 .

[24]  Peizheng Ma.  Thermal Homeostasis in Buildings (THiB): Radiant conditioning of hydronically activated buildings with large fenestration and adequate thermal mass using natural energy for thermal comfort , 2013 .

[25]  Gregor P. Henze,et al.  Primary energy and comfort performance of ventilation assisted thermo-active building systems in continental climates , 2008 .

[26]  Behdad Moghtaderi,et al.  Effect of thermal mass on the thermal performance of various Australian residential constructions systems , 2008 .

[27]  Doreen E. Kalz.  Heating and Cooling Concepts employing Environmental Energy and Thermo-Active Building Systems for Low-Energy Buildings: System Analysis and Optimization , 2010 .

[28]  Bjarne W. Olesen,et al.  Dynamic evaluation of the cooling capacity of thermo-active building systems. , 2006 .

[29]  Stefano Paolo Corgnati,et al.  Thermal mass activation by hollow core slab coupled with night ventilation to reduce summer cooling loads , 2007 .

[30]  K. W. Childs,et al.  Thermal mass assessment: an explanation of the mechanisms by which building mass influences heating and cooling energy requirements , 1983 .