Experimental Leak-Rate Measurement Through a Static Metal Seal

This paper presents an experimental study to characterize fluid leakage through a rough metal contact. The focus is on an original experimental setup and procedure designed to measure the fluid micro (or nano) leak rate with great precision over several orders of magnitude. Liquid leak-rate measurements were carried out under two distinct operating conditions, i.e., in the case of a pressure gradient applied between contact edges and in the case of a pure diffusive effect resulting from a species concentration gradient. Experimental leak-rate results are discussed in terms of effective contact permeability—or transmissivity—and in terms of effective contact diffusivity versus contact tightening.

[1]  Hiroshi Hirabayashi,et al.  The influence of designing factors on the sealing performance of C-seal , 1991 .

[2]  J. Greenwood,et al.  The Contact of Two Nominally Flat Rough Surfaces , 1970 .

[3]  James V. Beck,et al.  Parameter Estimation in Engineering and Science , 1977 .

[4]  H. A. Francis.  Application of spherical indentation mechanics to reversible and irreversible contact between rough surfaces , 1977 .

[5]  John I. McCool,et al.  Comparison of models for the contact of rough surfaces , 1986 .

[6]  T. S. Sankar,et al.  The influence of metal cutting forces on the formation of surface texture in turning , 1976 .

[7]  G. Armand,et al.  A theoretical and experimental relationship between the leakage of gases through the interface of two metals in contact and their superficial micro-geometry , 1964 .

[8]  Nicolas Letalleur,et al.  Averaged Reynolds Equation for Flows between Rough Surfaces in Sliding Motion , 2002 .

[9]  Tsuneji Kazamaki,et al.  Effect of surface roughness on compressive stress of static seals. , 1988 .

[10]  M. Prat,et al.  On the Leak Through a Spiral-Groove Metallic Static Ring Gasket , 2004 .

[11]  Izhak Etsion,et al.  A Model for the Static Sealing Performance of Compliant Metallic Gas Seals Including Surface Roughness and Rarefaction Effects , 2000 .

[12]  Alain Poncet,et al.  Leak-Tightness Assessment of Demountable Joints for the Super Fluid Helium System of the CERN Large Hadron Collider (LHC) , 1994 .

[13]  I. Etsion,et al.  A model for static sealing performance of end face seals , 1994 .

[14]  G. Cartoni.  Manuel pratique de chromatographie en phase gazeuse : edited by J. Tranchant, Masson et Cie., Paris, 1964, 232 pp. and 62 figs., price 36 F. , 1965 .

[15]  Gudmundur S. Bodvarsson,et al.  Lubrication theory analysis of the permeability of rough-walled fractures , 1991 .

[16]  Izhak Etsion,et al.  A Finite Element Based Elastic-Plastic Model for the Contact of Rough Surfaces , 2003 .

[17]  Yoshio Matsuzaki,et al.  Effect of Surface Roughness on Contact Pressure of Static Seals : Sealing Characteristics of Knife-Edge Seals , 1992 .

[18]  Izhak Etsion,et al.  Static sealing performance of gas mechanical seals including surface roughness and rarefaction effects , 1998 .

[19]  S. D. Probert,et al.  Prediction and measurement of true areas of contact between solids , 1987 .