A Solid Sulfur Cathode for Aqueous Batteries

Because of its high resistivity and subsequent low electroactivity, sulfur is not normally considered a room-temperature battery cathode. An elemental sulfur cathode has been made with a measured capacity of over 900 ampere�hours per kilogram, more than 90 percent of the theoretical storage capacity of solid sulfur at room temperature, accessed by means of a lightweight, highly conductive, aqueous polysulfide interface through the electrocatalyzed reaction S + H2O + 2e- → HS- + OH-. This solid sulfur cathode was first used in a battery with an aluminum anode for an overall discharge reaction 2Al + 3S + 3OH- + 3H2O → 2Al(OH)3 + 3HS-, giving a cell potential of 1.3 volts. The theoretical specific energy of the aluminum-sulfur battery (based on potassium salts) is 910 watt�hours per kilogram with an experimental specific energy of up to 220 watt�hours per kilogram.

[1]  W. Giggenbach.  Kinetics of the polysulfide-thiosulfate disproportionation up to 240.deg. , 1974 .

[2]  T. Sakai,et al.  Electrochemical Impedance Spectra and Deterioration Mechanism of Metal Hydride Electrodes , 1992 .

[3]  G. Hodes,et al.  The High Aqueous Solubility of K 2 S and Its Effect on Bulk and Photoelectrochemical Characteristics of Cd ( SeTe ) / S x = Cells I . Polysulfide Variation at Constant Sulfur/Sulfide Ratio , 1986 .

[4]  W. Giggenbach.  Equilibriums involving polysulfide ions in aqueous sulfide solutions up to 240.deg. , 1974 .

[5]  S. Licht.  Combined solution effects yield stable thin-film Cd(Se,Te)/polysulfide photoelectrochemical solar cells , 1986 .

[6]  S. Licht,et al.  The High Aqueous Solubility of K 2 S and Its Effect on Bulk and Photoelectrochemical Characteristics of Cd ( SeTe ) / S x = Cells II . Variation of Sulfur/Sulfide Ratio , 1986 .

[7]  S. Licht,et al.  Conductometric analysis of the second acid dissociation constant of H2S in highly concentrated aqueous media , 1991 .

[8]  Stuart Licht,et al.  An Energetic Medium for Electrochemical Storage Utilizing the High Aqueous Solubility of Potassium Polysulfide , 1987 .

[9]  E. Cairns,et al.  Kinetics of Aqueous Polysulfide Solutions II . Electrochemical Measurement of the Rates of Coupled Electrochemical and Chemical Reactions by the Potential Step Method , 1986 .

[10]  W. Giggenbach.  Optical spectra and equilibrium distribution of polysulfide ions in aqueous solution at 20.deg. , 1972 .

[11]  G. Hodes,et al.  Numerical analysis of aqueous polysulfide solutions and its application to cadmium chalcogenide/polysulfide photoelectrochemical solar cells , 1986 .

[12]  S. Licht,et al.  Novel Aqueous Aluminum/Sulfur Batteries , 1993 .

[13]  J. Fuller,et al.  Alkali Metal Reduction Potentials Measured in Chloroaluminate Ambient‐Temperature Molten Salts , 1992 .

[14]  C. Marsh,et al.  A Novel Aqueous Aluminum/Ferricyanide Battery , 1992 .

[15]  Reshef Tenne,et al.  A light-variation insensitive high efficiency solar cell , 1987, Nature.

[16]  N. Hartler,et al.  Rate of Sulfur Dissolution in Aqueous Sodium Sulfide , 1967 .

[17]  S. Licht.  Aqueous Solubilities, Solubility Products and Standard Oxidation‐Reduction Potentials of the Metal Sulfides , 1988 .

[18]  S. Licht.  A description of energy conversion in photoelectrochemical solar cells , 1987, Nature.

[19]  D. Cahen,et al.  Electrocatalytic Electrodes for the Polysulfide Redox System , 1980 .