High-resolution hard x-ray and gamma-ray spectrometers based on superconducting absorbers coupled to superconducting transition edge sensors

We are developing detectors based on bulk superconducting absorbers coupled to superconducting transition edge sensors (TES) for high-resolution spectroscopy of hard X-rays and soft gamma-rays. We have achieved an energy resolution of 70 eV FWHM at 60 keV using a 1 X 1 X 0.25 mm3 Sn absorber coupled to a Mo/Cu multilayer TES with a transition temperature of 100 mK. The response of this detector is compared with a simple model using only material properties data and characteristics derived from IV-measurements. We have also manufactured detectors using superconducting absorbers with a higher stopping power, such as Pb and Ta. We present our first measurements of these detectors, including the thermalization characteristics of the bulk superconducting absorbers. The differences in performance between the detectors are discussed and an outline of the future direction of our detector development efforts is given.

[1]  J. R. Olson,et al.  Thermal conductivity of some common cryostat materials between 0.05 and 2 K , 1993 .

[2]  C. A. Swenson.  Linear thermal expansivity (1.5–300 K) and heat capacity (1.2–90 K) of Stycast 2850FT , 1997 .

[3]  S. Harvey Moseley,et al.  Adapting calorimetric X-ray detectors for Compton scattering experiments performed at high energies , 1992 .

[4]  A. Monfardini,et al.  High Energy Resolution Bolometers for Nuclear Physics and X-Ray Spectroscopy , 1999 .

[5]  Cheng-Chung Chi,et al.  Quasiparticle and phonon lifetimes in superconductors , 1976 .

[6]  Flavio Gatti,et al.  Alpha-, beta-, and gamma-ray detection with microcalorimeters made with a superconducting absorber , 1992, Optics & Photonics.

[7]  A. C. Anderson,et al.  Selection of a thermal bonding agent for temperatures below 1 K , 1970 .

[8]  F. Gatti,et al.  Superconducting rhenium as absorber for thermal detectors , 1992 .

[9]  G. J. Sellers,et al.  Anomalous heat capacity of superconducting vanadium , 1974 .

[10]  H. Schultz,et al.  HYDROGEN CONTAMINATION IN TANTALUM AND NIOBIUM FOLLOWING UHV-DEGASSING. , 1972 .

[11]  Flavio Gatti,et al.  Further results on μ-calorimeters with superconducting absorber , 1993 .

[12]  P. Egelhof,et al.  Low-temperature X-ray detectors for precise Lamb shift measurements on hydrogen-like heavy ions , 2000 .

[13]  Jukka P. Pekola,et al.  Hot electron effects in metallic single electron components , 1996 .

[14]  Clarke,et al.  Hot-electron effects in metals. , 1994, Physical review. B, Condensed matter.

[15]  G. Forster,et al.  Calorimetric particle detectors with superconducting absorber materials , 1991 .

[16]  Samuel Harvey Moseley,et al.  Signal processing for microcalorimeters , 1993 .

[17]  Troy W. Barbee,et al.  Gamma-ray spectrometers using a bulk Sn absorber coupled to a Mo/Cu multilayer superconducting transition edge sensor , 1999 .

[18]  S. Moseley,et al.  Thermal detectors as X-ray spectrometers , 1984 .

[19]  N. E. Booth.  Quasiparticle trapping and the quasiparticle multiplier , 1987 .

[20]  K. Irwin.  An application of electrothermal feedback for high resolution cryogenic particle detection , 1995 .

[21]  Troy W. Barbee,et al.  High-resolution gamma-ray spectrometers using bulk absorbers coupled to Mo/Cu multilayer superconducting transition-edge sensors , 2000, SPIE Optics + Photonics.