Switchable selectivity for gating ion transport with mixed polyelectrolyte brushes: approaching ‘smart’ drug delivery systems

A pH-responsive mixed polyelectrolyte brush from tethered polyacrylic acid (PAA) and poly(2-vinylpyridine) (P2VP) (PAA:P2VP = 69:31 by weight) was prepared and used for selective gating transport of anions and cations across the thin film. An ITO glass electrode was modified with the polymer brush and used to study the switchable permeability of the mixed brush triggered by changes in pH of the aqueous environment in the presence of two soluble redox probes: [Fe(CN)(6)](4-) and [Ru(NH(3))(6)](3+). The responsive behavior of the brush was also investigated using the in situ ellipsometric measurements of the brush swelling, examination of the brush morphology with atomic force microscopy (AFM), and contact angle measurements of the brush samples extracted from aqueous solutions at different pH values. The mixed brush demonstrated a bipolar permselective behavior. At pH<3 the positively charged P2VP chains enabled the electrochemical process for the negatively charged redox probe, [Fe(CN)(6)](4-), while the redox process for the positively charged redox probe was effectively inhibited. On the contrary, at pH>6 a reversible redox process for the positively charged redox probe, [Ru(NH(3))(6)](3+), was observed, while the redox process for the negatively charged redox species, [Fe(CN)(6)](4-), was fully inhibited. Stepwise changing the pH value and recording cyclic voltammograms for the intermediate states of the polymer brush allowed electrochemical observation of the brush transition from the positively charged state, permeable for the negatively charged species, to the negatively charged state, permeable for the positively charged species. The data of ellipsometric, AFM and contact angle measurements are in accord with the electrochemical study. The discovered properties of the brush could be used for the development of 'smart' sensors and drug delivery systems, for example, a smart drug delivery capsule which could release negatively charged molecules of drugs in acidic conditions, while positively charged molecules of drugs will be released in neutral conditions.

[1]  Y. Yoshimi,et al.  Gate effect of theophylline-imprinted polymers grafted to the cellulose by living radical polymerization , 2004 .

[2]  G. J. Fleer,et al.  Analytical Self-Consistent-Field Model of Weak Polyacid Brushes , 1995 .

[3]  S. Minko,et al.  Three-Dimensional Analysis of Switching Mechanism of Mixed Polymer Brushes , 2007 .

[4]  Evgeny Katz,et al.  Switchable electrode controlled by enzyme logic network system: approaching physiologically regulated bioelectronics. , 2009, Journal of the American Chemical Society.

[5]  G. Sukhorukov,et al.  Stimuli-responsive multilayered hybrid nanoparticle/polyelectrolyte capsules , 2007 .

[6]  E. Katz,et al.  An electrochemical gate based on a stimuli-responsive membrane associated with an electrode surface. , 2007, The journal of physical chemistry. B.

[7]  J. Anzai,et al.  Redox reactions of ferricyanide ions in layer-by-layer deposited polysaccharide films: a significant effect of the type of polycation in the films. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[8]  N. Houbenov,et al.  Mixed Polyelectrolyte Brush from Oppositely Charged Polymers for Switching of Surface Charge and Composition in Aqueous Environment , 2003 .

[9]  B. Mattiasson,et al.  Smart polymers: Physical forms and bioengineering applications , 2007 .

[10]  S. Armes,et al.  Stimuli-Responsive Polymer Ultrathin Films with a Binary Architecture: Combined Layer-by-Layer Polyelectrolyte and Surface-Initiated Polymerization Approach , 2008 .

[11]  I. Luzinov,et al.  Polystyrene layers grafted to epoxy-modified silicon surfaces , 2000 .

[12]  Jia-cong Shen,et al.  Robust ion-permselective multilayer films prepared by photolysis of polyelectrolyte multilayers containing photo-cross-linkable and photolabile groups. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[13]  Shin-ichi Nakao,et al.  Response Mechanism of a Molecular Recognition Ion Gating Membrane , 2004 .

[14]  A. Mayes,et al.  Preparation of pH-responsive polymer membranes by self-organization , 2002 .

[15]  S. Minko,et al.  Responsive Polyelectrolyte Gel Membranes , 2006 .

[16]  R. Mezzenga,et al.  Phase behavior and temperature-responsive molecular filters based on self-assembly of polystyrene-block-poly(N-isopropylacrylamide)-block-polystyrene , 2007 .

[17]  K. Eichhorn,et al.  Ultrathin responsive polyelectrolyte brushes studied by infrared synchrotron mapping ellipsometry , 2008 .

[18]  H. Iwata,et al.  Preparation and properties of novel environment-sensitive membranes prepared by graft polymerization onto a porous membrane , 1988 .

[19]  S. Minko,et al.  Superhydrophobic Surfaces Generated from Water‐Borne Dispersions of Hierarchically Assembled Nanoparticles Coated with a Reversibly Switchable Shell , 2008 .

[20]  Naifei Hu,et al.  Salt-induced swelling and electrochemical property change of hyaluronic acid/myoglobin multilayer films. , 2007, The journal of physical chemistry. B.

[21]  Evgeny Katz,et al.  Biofuel cell controlled by enzyme logic systems. , 2009, Journal of the American Chemical Society.

[22]  Yoshihiro Ito,et al.  pH Control of Transport through a Porous Membrane Self-Assembled with a Poly(acrylic acid) Loop Brush , 2001 .

[23]  Liang-Yin Chu,et al.  A pH‐Responsive Gating Membrane System with Pumping Effects for Improved Controlled Release , 2006 .

[24]  S. Minko,et al.  Nonwettable thin films from hybrid polymer brushes can be hydrophilic. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[25]  Y. Ikada,et al.  Preparation of temperature-sensitive membranes by graft polymerization onto a porous membrane , 1991 .

[26]  Igor Luzinov,et al.  Mixed polymer brushes by sequential polymer addition: anchoring layer effect. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[27]  Liang-Yin Chu,et al.  Control of pore size and permeability of a glucose-responsive gating membrane for insulin delivery. , 2004, Journal of controlled release : official journal of the Controlled Release Society.

[28]  J. Anzai,et al.  Layer-by-layer thin film-coated electrodes for electrocatalytic determination of ascorbic acid. , 2007, Talanta.

[29]  F. D. Prez,et al.  Track etched membranes with thermo-adjustable porosity and separation properties by surface immobilization of poly(N-vinylcaprolactam) , 2005 .

[30]  Jong-Dal Hong,et al.  Photoresponsive ion gating function of an azobenzene polyelectrolyte multilayer spin-self-assembled on a nanoporous support. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[31]  W. Brittain,et al.  A structural definition of polymer brushes , 2007 .

[32]  Yoshihiro Ito,et al.  Visualization of critical pH-controlled gating of a porous membrane grafted with polyelectrolyte brushes , 1997 .

[33]  O. Borisov,et al.  Curved polymer and polyelectrolyte brushes beyond the Daoud-Cotton model , 2006, The European physical journal. E, Soft matter.

[34]  Evgeny Katz,et al.  Polymer Brush-Modified Electrode with Switchable and Tunable Redox Activity for Bioelectronic Applications , 2008 .

[35]  Wilhelm T S Huck,et al.  Electrochemical characteristics of polyelectrolyte brushes with electroactive counterions. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[36]  J. Genzer,et al.  Phase behavior and charge regulation of weak polyelectrolyte grafted layers. , 2007, Physical review letters.

[37]  L. Ionov,et al.  Smart Microfluidic Channels , 2006 .

[38]  Jian Zhou,et al.  Biochemically controlled bioelectrocatalytic interface. , 2008, Journal of the American Chemical Society.

[39]  Yanlei Su,et al.  Tunable water flux of a weak polyelectrolyte ultrafiltration membrane , 2007 .

[40]  Daeyeon Lee,et al.  pH-induced hysteretic gating of track-etched polycarbonate membranes: swelling/deswelling behavior of polyelectrolyte multilayers in confined geometry. , 2006, Journal of the American Chemical Society.

[41]  T. Peng,et al.  PNIPAAm and PMAA co-grafted porous PE membranes: living radical co-grafting mechanism and multi-stimuli responsive permeability , 2001 .

[42]  B. Tieke,et al.  Selective transport and incorporation of highly charged metal and metal complex ions in self-assembled polyelectrolyte multilayer membranes , 2002 .

[43]  R. Advíncula,et al.  pH-sensitive bipolar ion-permselective ultrathin films. , 2004, Journal of the American Chemical Society.

[44]  K. Neoh,et al.  Redox-Sensitive Microporous Membranes Prepared from Poly(vinylidene fluoride) Grafted with Viologen-Containing Polymer Side Chains , 2003 .

[45]  S. Minko,et al.  Multiresponsive Biopolyelectrolyte Membrane , 2008 .

[46]  T. Nylander,et al.  New Experimental Setup To Use Ellipsometry To Study Liquid−Liquid and Liquid−Solid Interfaces , 2002 .

[47]  Liang-Yin Chu,et al.  Negatively thermoresponsive membranes with functional gates driven by zipper-type hydrogen-bonding interactions. , 2005, Angewandte Chemie.

[48]  R. Spohr,et al.  Thermal control of drug release by a responsive ion track membrane observed by radio tracer flow dialysis. , 1998, Journal of controlled release : official journal of the Controlled Release Society.

[49]  L. Ionov,et al.  Surface functionalization by smart coatings: Stimuli-responsive binary polymer brushes , 2006 .

[50]  J. Schlenoff,et al.  Polyelectrolyte Multilayers with Reversible Thermal Responsivity , 2005 .

[51]  S. Minko,et al.  Molecular-engineered stimuli-responsive thin polymer film: a platform for the development of integrated multifunctional intelligent materials , 2009 .

[52]  K. Neoh,et al.  pH-Sensitive Fluorinated Polyimides with Grafted Acid and Base Side Chains , 2003 .

[53]  Measuring the surface roughness of sputtered coatings by microgravimetry. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[54]  Jinghong Li,et al.  Temperature, ionic strength and pH induced electrochemical switching of smart polymer interfaces. , 2006, Chemical communications.

[55]  K. Eichhorn,et al.  In situ infrared ellipsometric study of stimuli-responsive mixed polyelectrolyte brushes. , 2007, Analytical chemistry.

[56]  O. Borisov,et al.  Theory of Ionizable Polymer Brushes , 1995 .

[57]  M. Bruening,et al.  Controlling the Permeability of Multilayered Polyelectrolyte Films through Derivatization, Cross-Linking, and Hydrolysis , 2001 .

[58]  O. Borisov,et al.  Polyelectrolytes Grafted to Curved Surfaces , 1996 .

[59]  Merlin L. Bruening,et al.  Electrochemical and in Situ Ellipsometric Investigation of the Permeability and Stability of Layered Polyelectrolyte Films , 2000 .

[60]  T. Aoyagi,et al.  Stimuli-responsive properties of N-isopropylacrylamide-based ultrathin hydrogel films prepared by photo-cross-linking. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[61]  S. Minko.  Responsive Polymer Brushes , 2006 .

[62]  S. Minko,et al.  Responsive colloidal systems: reversible aggregation and fabrication of superhydrophobic surfaces. , 2007, Journal of colloid and interface science.

[63]  S. Minko,et al.  Stimuli-responsive hydrogel thin films , 2009 .

[64]  E. Gil,et al.  Stimuli-reponsive polymers and their bioconjugates , 2004 .

[65]  M. Akashi,et al.  Stepwise Preparation and Characterization of Ultrathin Hydrogels Composed of Thermoresponsive Polymers , 2004 .

[66]  Frank Simon,et al.  Synthesis of Adaptive Polymer Brushes via “Grafting To” Approach from Melt , 2002 .

[67]  Jian Zhou,et al.  An integrated multifunctional nanosystem from command nanoparticles and enzymes. , 2009, Small.

[68]  Evgeny Katz,et al.  Chemical gating with nanostructured responsive polymer brushes: mixed brush versus homopolymer brush. , 2008, ACS nano.

[69]  I. Willner,et al.  Layered Polyelectrolyte Films on Au Electrodes: Characterization of Electron-Transfer Features at the Charged Polymer Interface and Application for Selective Redox Reactions , 2001 .

[70]  Feng Zhou,et al.  Probing the responsive behavior of polyelectrolyte brushes using electrochemical impedance spectroscopy. , 2007, Analytical chemistry.

[71]  Igor Luzinov,et al.  Stimuli‐Responsive Colloidal Systems from Mixed Brush‐Coated Nanoparticles , 2007 .