Effect of PA6T on morphology and electrical conductivity in PA66/PA6T/PPE/multiwalled carbon nanotube nanocomposites

[1]  Changyu Shen,et al.  Vapor sensing performance as a diagnosis probe to estimate the distribution of multi-walled carbon nanotubes in poly(lactic acid)/polypropylene conductive composites , 2018 .

[2]  Mohammed H Al-Saleh.  Clay/carbon nanotube hybrid mixture to reduce the electrical percolation threshold of polymer nanocomposites , 2017 .

[3]  K. Sui,et al.  Balance the electrical properties and mechanical properties of carbon black filled immiscible polymer blends with a double percolation structure , 2017 .

[4]  E. Drioli,et al.  Mixed matrix membranes containing functionalized multiwalled carbon nanotubes: Mesoscale simulation and experimental approach for optimizing dispersion , 2016 .

[5]  Tianyu Liu,et al.  Selective localization of multi-walled carbon nanotubes in bi-component biodegradable polyester blend for rapid electroactive shape memory performance , 2016 .

[6]  Youngjae Yoo,et al.  Influence of carbon nanotubes localization and transfer on electrical conductivity in PA66/(PS/PPE)/CNTs nanocomposites , 2016 .

[7]  F. Preda.  Dynamics of polyamide in the solid state in presence of solvents and in the molten state , 2016 .

[8]  Shumei Liu,et al.  Effect of pre-irradiation PPO-grafted maleic anhydride on structure and properties of PPO-g-MAH/PA66 blends , 2014 .

[9]  Y. Mai,et al.  Core/shell rubber toughened polyamide 6: an effective way to get good balance between toughness and yield strength , 2013 .

[10]  O. Park,et al.  Preferential positioning of γ-ray treated multi-walled carbon nanotubes in polyamide 6,6/poly(p-phenylene ether) blends , 2013, Macromolecular Research.

[11]  D. Tripathy,et al.  Preparation, characterization and properties of acid functionalized multi-walled carbon nanotube reinforced thermoplastic polyurethane nanocomposites , 2011 .

[12]  Sabu Thomas,et al.  Handbook of Engineering and Specialty Thermoplastics: Thomas/Handbook , 2011 .

[13]  Jiachun Feng,et al.  Compatibilization of immiscible polymer blends using graphene oxide sheets. , 2011, ACS nano.

[14]  Yu-Bin Shen,et al.  Influence of carbon nanotubes with different functional groups on the morphology and properties of PPO/PA6 blends , 2009 .

[15]  F. Jiang,et al.  Preparation and Characterization of Polyurethane/Multi-Walled Carbon Nanotubes Composites with Multi Functional Performance , 2008 .

[16]  R. Gorga,et al.  Morphological and mechanical properties of carbon nanotube/polymer composites via melt compounding , 2006 .

[17]  R. Jerome,et al.  Formation of Polyamide 12-Polyisoprene Core-Shell Particles in Polystyrene by Reactive Blending , 2004 .

[18]  C. Hansen.  Hansen Solubility Parameters: A User's Handbook , 1999 .

[19]  Glenn P. Desio.  Characterization and properties of polyphthalamide/polyamide blends and polyphthalamide/polyamide/polyolefin blends , 1996 .

[20]  Shigeo Asai,et al.  Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black , 1991 .

[21]  F. Chang,et al.  Polymer blends of polyamide-6 (PA6) and poly(phenylene oxide) (PPO) compatibilized by styrene-maleic anhydride (SMA) copolymer , 1997 .