Applications of fault detection and diagnostic techniques for refrigeration and air conditioning: A review of basic principles

Abstract During the 1990s a number of different prototype Refrigeration and Air Conditioning (RAC) Fault Detection and Diagnostic (FDD) systems have been developed and subsequently presented in various research publications. This interest in RAC FDD systems is generally a result of the potential benefits, such as reducing equipment downtime and avoiding energy wastage, these systems can bring to new and existing RAC installations. With the exception of a few reports produced by the International Energy Agency (IEA) Annex 25, no other publications or texts exist that bring together the various FDD concepts directly associated with RAC applications. However, the reports produced by the IEA are far from comprehensive enough to be of use to typical industry personnel. Therefore, the aim of this review is to present RAC personnel with a clearer understanding of the fundamental principles associated with the application of RAC FDD. The paper will initially highlight various relevant areas before presenting examples of typical FDD systems applicable to RAC systems.

[1]  Jeffrey M. Gordon,et al.  Experimental study of the fundamental properties of reciprocating chillers and their relation to thermodynamic modeling and chiller design , 1996 .

[2]  J. C. Visier,et al.  A neural network prototype for fault detection and diagnosis of heating systems , 1997 .

[3]  Simon Haykin,et al.  Neural Networks: A Comprehensive Foundation , 1998 .

[4]  J. I.  The Design of Experiments , 1936, Nature.

[5]  Jincan Chen,et al.  A class of irreversible Carnot refrigeration cycles with a general heat transfer law , 1990 .

[6]  Yan,et al.  Unified description of endoreversible cycles. , 1989, Physical review. A, General physics.

[7]  Jens Brandt,et al.  Knowledge-based fault detection and diagnosis in flow-injection analysis , 1994 .

[8]  Rolf Isermann,et al.  Process Fault Detection Based on Modeling and Estimation Methods , 1982 .

[9]  G. M. Kaler.  Expert system predicts service , 1988 .

[10]  J. R. PARTINGTON,et al.  Advances in Thermodynamics , 1952, Nature.

[11]  Benjamin Kuipers,et al.  Process monitoring and diagnosis: a model-based approach , 1991, IEEE Expert.

[12]  Jie Chen,et al.  Robust Model-Based Fault Diagnosis for Dynamic Systems , 1998, The International Series on Asian Studies in Computer and Information Science.

[13]  D. C. Agrawal,et al.  Performance of a Carnot refrigerator at maximum cooling power , 1990 .

[14]  Jeffrey M. Gordon,et al.  Centrifugal chillers: Thermodynamic modelling and a diagnostic case study , 1995 .

[15]  Janos Gertler,et al.  Fault detection and diagnosis in engineering systems , 1998 .

[16]  G. E. Kelly,et al.  Fault diagnosis of an air-handling unit using artificial neural networks , 1996 .

[17]  Todd M. Rossi,et al.  A Statistical, Rule-Based Fault Detection and Diagnostic Method for Vapor Compression Air Conditioners , 1997 .

[18]  Thomas H. Kuehn,et al.  Irreversibility analysis of a water-to-water mechanical-compression heat pump , 1988 .

[19]  Jan F. Kreider,et al.  A quasi-real-time expert system for commercial building HVAC diagnostics , 1989 .

[20]  Gabor Karsai,et al.  Real-time fault diagnostics , 1991, IEEE Expert.

[21]  Jincan Chen,et al.  Optimal performance of an endoreversible‐combined refrigeration cycle , 1988 .

[22]  Chih Wu,et al.  Specific heating load of an endoreversible Carnot heat Pump , 1993 .

[23]  Philip Haves,et al.  Condition monitoring in HVAC subsystems using first principles models , 1996 .

[24]  K. Ng,et al.  Predictive and diagnostic aspects of a universal thermodynamic model for chillers , 1995 .

[25]  Jim Klein,et al.  Diagnostic model processor: Using deep knowledge for process fault diagnosis , 1990 .

[26]  Jeffrey M. Gordon,et al.  Thermodynamic modeling of reciprocating chillers , 1994 .

[27]  Paul M. Frank,et al.  Fault diagnosis in dynamic systems using analytical and knowledge-based redundancy: A survey and some new results , 1990, Autom..

[28]  James E. Braun,et al.  Automated Fault Detection and Diagnostics for the HVAC&R Industry , 1999 .

[29]  Masami Suzuki,et al.  Typical faults of air conditioning systems and fault detection by ARX model and extended Kalman filter , 1996 .

[30]  Adrian Bejan,et al.  Power and Refrigeration Plants for Minimum Heat Exchanger Inventory , 1993 .

[31]  Jan F. Kreider,et al.  Expert systems, neural networks and artificial intelligence applications in commercial building HVAC operations , 1992 .

[32]  Paul M. Frank,et al.  Issues of Fault Diagnosis for Dynamic Systems , 2010, Springer London.

[33]  C. Y. Han,et al.  Fault detection and diagnosis of HVAC systems , 1999 .

[34]  Cristian Ghiaus.  Fault diagnosis of air conditioning systems based on qualitative bond graph , 1999 .

[35]  W. Y. Lee,et al.  Fault diagnosis and temperature sensor recovery for an air-handling unit , 1997 .

[36]  Jincan Chen,et al.  An optimal endoreversible three‐heat‐source refrigerator , 1989 .

[37]  Chih Wu,et al.  Performance of a solar-engine-driven-air-conditioning system , 1993 .

[38]  Jincan Chen,et al.  Equivalent combined systems of three‐heat‐source heat pumps , 1989 .

[39]  Chih Wu,et al.  Cooling capacity optimization of a geothermal absorption refrigeration cycle , 1992 .

[40]  A. Bejan.  Advanced Engineering Thermodynamics , 1988 .

[41]  Jeffrey M. Gordon,et al.  Diagnostics and optimization of reciprocating chillers: theory and experiment , 1997 .

[42]  Pierre Borne,et al.  Concise Encyclopedia of Modelling and Simulation , 1991 .