A Comparative Study of the Monitoring of a Self Aligning Spherical Journal using Surface Vibration, Airborne Sound and Acoustic Emission

A Self aligning spherical journal bearing is a plain bearing which has spherical surface contact that can be applied in high power industrial machinery. This type of bearing can accommodate a misalignment problem. The journal bearing faults degrade machine performance, decrease life time service and cause unexpected failure which are dangerous for safety issues. Non-intrusive measurements such as surface vibration (SV), airborne sound (AS) and acoustic emission (AE) measurement are appropriate monitoring methods for early stage journal bearing fault in low, medium and high frequency. This paper focuses on the performance comparison using SV, AS and AE measurements in monitoring a self aligning spherical journal bearing for normal and faulty (scratch) conditions. It examines the signals in the time domain and frequency domain and identifies the frequency ranges for each measurement in which significant changes are observed. The results of SV, AS and AE experiments indicate that the spectrum can be used to detect the differences between normal and faulty bearing. The statistic parameter shows that RMS value and peak value for faulty bearing is higher than normal bearing.

[1]  Masayasu Ohtsu.  Moment tensor analysis of AE and SiGMA code , 2000 .

[2]  A. V. Kolubaev,et al.  Analysis of acoustic emission during sliding friction of manganese steel , 2010 .

[3]  Changjin Lee,et al.  Experimental identification of abnormal noise and vibration in a high-speed polygon mirror scanner motor due to mechanical contact of plain journal bearing , 2009 .

[4]  Frank Kreith,et al.  The CRC handbook of mechanical engineering , 1998 .

[5]  B. J. Roylance,et al.  Machine failure and its avoidance—what is tribology's contribution to effective maintenance of critical machinery? , 2003 .

[6]  Randall F. Barron,et al.  Industrial Noise Control and Acoustics , 2002 .

[7]  Albert Albers,et al.  Monitoring Lubrication Regimes in Sliding Bearings Using Acoustic Emission Analysis , 2006 .

[8]  Nesimi Ertugrul,et al.  Induction machine on-line condition monitoring and fault diagnosis - a survey , 2003 .

[9]  R. J. Boness,et al.  Adhesive and abrasive wear studies using acoustic emission techniques , 1991 .

[10]  Clarence W. de Silva,et al.  Vibration: Fundamentals and Practice, Second Edition , 2006 .

[11]  Vikas Juneja,et al.  Friction-induced vibration and noise generation of instrument panel material pairs , 2002 .

[12]  S. Ali Mirhadizadeh.  Observations of acoustic emission in a hydrodynamic bearing , 2009 .

[13]  T.G. Habetler,et al.  Motor bearing damage detection using stator current monitoring , 1994, Proceedings of 1994 IEEE Industry Applications Society Annual Meeting.