Fabrication of bulk heterojunction photovoltaic cells with controlled distribution of p-n components by evaporative spray deposition using ultradilute solution

A distribution-controlled bulk heterojunction (dc-BHJ) photovoltaic cell where the distribution of an electron donor and acceptor is controlled across the film was fabricated by Evaporative Spray Deposition using Ultradilute Solution (ESDUS) method, which can build a layered structure of polymer semiconductors soluble in a same solvent, and the energy conversion efficiency, PCE, of the dc-BHJ was significantly improved compared with a conventional BHJ cell. The dc-BHJ cells were fabricated by changing the ratio of a donor, regioregular poly(3-hexyl-thiophene-2,5-diyl) (P3HT), and an acceptor, a fullerene derivative (PCBM), from 2:1 to 1:2. The short circuit current, Jsc, and PCE of a dc-BHJ cell having P3HT-rich BHJ/PCBM-rich BHJ structure was 6.06 mA/cm2 and 2.15 %, respectively, while those of a conventional BHJ cell having P3HT:PCBM=1:1 layer were 5.26 mA/cm2, 1.71 %. In the dc-BHJ cells, the introduction of composition gradient brought about the increase in conversion efficiency. The transportation of photogenerated charge carriers to the collecting electrodes was improved because the better pathways should be formed in the dc-BHJ cells.

[1]  Roland Hany,et al.  Nanostructured Organic Layers via Polymer Demixing for Interface-Enhanced Photovoltaic Cells , 2006 .

[2]  H. Sirringhaus,et al.  Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene) , 2003 .

[3]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[4]  Jean M. J. Fréchet,et al.  Dependence of Regioregular Poly(3-hexylthiophene) Film Morphology and Field-Effect Mobility on Molecular Weight , 2005 .

[5]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[6]  Jean-Michel Nunzi,et al.  Efficient polymer-based interpenetrated network photovoltaic cells , 2004 .

[7]  T. Tsutsui,et al.  Novel Method for Polymer Thin Film Preparation: Spray Deposition of Highly Diluted Polymer Solutions , 2002 .

[8]  Christoph J. Brabec,et al.  Solution-Processed Organic Solar Cells , 2008 .

[9]  Tetsuo Tsutsui,et al.  Preparation of organic bulk heterojunction photovoltaic cells by evaporative spray deposition from ultradilute solution , 2004 .

[10]  Richey M. Davis,et al.  Improved morphology of polymer-fullerene photovoltaic devices with thermally induced concentration gradients , 2005 .

[11]  Xiong Gong,et al.  New Architecture for High‐Efficiency Polymer Photovoltaic Cells Using Solution‐Based Titanium Oxide as an Optical Spacer , 2006 .

[12]  T. Tsutsui,et al.  Polymer Field Effect Transistors of F8T2 Prepared by Evaporative Spray Deposition using Ultradilute Solution Technique , 2008 .

[13]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[14]  Chunxiang Zhu,et al.  The use of thermal initiator to make organic bulk heterojunction solar cells with a good percolation path , 2008 .

[15]  J. C. Scott,et al.  Numerical simulations of layered and blended organic photovoltaic cells , 2005 .

[16]  Gang Li,et al.  Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene) , 2005 .

[17]  B. Pradhan,et al.  Organic photovoltaic devices: concentration gradient of donor and acceptor materials in the molecular scale , 2005 .

[18]  Christoph J. Brabec,et al.  Correlation Between Structural and Optical Properties of Composite Polymer/Fullerene Films for Organic Solar Cells , 2005 .