Thermo-electrochemical evaluation of lithium-ion batteries for space applications

Abstract Advanced energy storage and power management systems designed through rigorous materials selection, testing and analysis processes are essential to ensuring mission longevity and success for space exploration applications. Comprehensive testing of Boston Power Swing 5300 lithium-ion (Li-ion) cells utilized by the National Aeronautics and Space Administration (NASA) to power humanoid robot Robonaut 2 (R2) is conducted to support the development of a test-correlated Thermal Desktop (TD) Systems Improved Numerical Differencing Analyzer (SINDA) (TD-S) model for evaluation of power system thermal performance. Temperature, current, working voltage and open circuit voltage measurements are taken during nominal charge–discharge operations to provide necessary characterization of the Swing 5300 cells for TD-S model correlation. Building from test data, embedded FORTRAN statements directly simulate Ohmic heat generation of the cells during charge–discharge as a function of surrounding temperature, local cell temperature and state of charge. The unique capability gained by using TD-S is demonstrated by simulating R2 battery thermal performance in example orbital environments for hypothetical extra-vehicular activities (EVA) exterior to a small satellite. Results provide necessary demonstration of this TD-S technique for thermo-electrochemical analysis of Li-ion cells operating in space environments.

[1]  M. Ozisik.  Heat Transfer: A Basic Approach , 1984 .

[2]  Chee Wei Tan,et al.  A review of energy sources and energy management system in electric vehicles , 2013 .

[3]  Farschad Torabi,et al.  Study of Thermal-Runaway in Batteries I. Theoretical Study and Formulation , 2011 .

[4]  David G. Gilmore,et al.  Satellite thermal control handbook , 1994 .

[5]  J. Newman,et al.  Heat‐Generation Rate and General Energy Balance for Insertion Battery Systems , 1997 .

[6]  Qie Sun,et al.  Operations of the thermal control system for Alpha Magnetic Spectrometer electronics following the beta angle of the International Space Station , 2014 .

[7]  John Newman,et al.  A General Energy Balance for Battery Systems , 1984 .

[8]  W. Bessler,et al.  Numerical investigation of kinetic mechanism for runaway thermo-electrochemistry in lithium-ion cells , 2014 .

[9]  P. Lettieri,et al.  An introduction to heat transfer , 2007 .

[10]  James W. Evans,et al.  Heat Transfer Phenomena in Lithium/Polymer‐Electrolyte Batteries for Electric Vehicle Application , 1993 .

[11]  Edgar Zapata,et al.  An Analysis and Review of Measures and Relationships in Space Transportation Affordability , 2014 .

[12]  K. Smith,et al.  Three dimensional thermal-, electrical-, and electrochemical-coupled model for cylindrical wound large format lithium-ion batteries , 2013 .

[13]  Bugga V. Ratnakumar,et al.  Li ion batteries for aerospace applications , 2001 .

[14]  William Walker,et al.  Thermo-electrochemical analysis of lithium ion batteries for space applications using Thermal Desktop , 2014 .

[15]  S. C. Chen,et al.  Thermal analysis of lithium-ion batteries , 2005 .

[16]  James B. Robinson,et al.  In-operando high-speed tomography of lithium-ion batteries during thermal runaway , 2015, Nature Communications.

[17]  Juan Carlos Ramos,et al.  Novel thermal management system design methodology for power lithium-ion battery , 2014 .

[18]  T. Fuller,et al.  A Critical Review of Thermal Issues in Lithium-Ion Batteries , 2011 .

[19]  Xuning Feng,et al.  Characterization of penetration induced thermal runaway propagation process within a large format lithium ion battery module , 2015 .

[20]  Masatoshi Uno,et al.  Development and on-orbit operation of lithium-ion pouch battery for small scientific satellite “REIMEI” , 2011 .

[21]  James W. Evans,et al.  Three‐Dimensional Thermal Modeling of Lithium‐Polymer Batteries under Galvanostatic Discharge and Dynamic Power Profile , 1994 .