Microstructure and corrosion behavior of laser processed NiTi alloy.

Laser Engineered Net Shaping (LENS™), a commercially available additive manufacturing technology, has been used to fabricate dense equiatomic NiTi alloy components. The primary aim of this work is to study the effect of laser power and scan speed on microstructure, phase constituents, hardness and corrosion behavior of laser processed NiTi alloy. The results showed retention of large amount of high-temperature austenite phase at room temperature due to high cooling rates associated with laser processing. The high amount of austenite in these samples increased the hardness. The grain size and corrosion resistance were found to increase with laser power. The surface energy of NiTi alloy, calculated using contact angles, decreased from 61 mN/m to 56 mN/m with increase in laser energy density from 20 J/mm(2) to 80 J/mm(2). The decrease in surface energy shifted the corrosion potentials to nobler direction and decreased the corrosion current. Under present experimental conditions the laser power found to have strong influence on microstructure, phase constituents and corrosion resistance of NiTi alloy.

[1]  H. C. Man,et al.  Laser fabrication of porous surface layer on NiTi shape memory alloy , 2005 .

[2]  X. Ren,et al.  RECENT DEVELOPMENTS IN THE RESEARCH OF SHAPE MEMORY ALLOYS , 1999 .

[3]  B. Bertheville,et al.  Alternative powder metallurgical processing of Ti-rich NiTi shape-memory alloys , 2005 .

[4]  M. Wu,et al.  Fabrication of Nitinol Materials and Components , 2002 .

[5]  Christ P. Paul,et al.  Investigations on the influence of composition in the development of Ni-Ti shape memory alloy using laser based additive manufacturing , 2015 .

[6]  A. Bandyopadhyay,et al.  Bone cell-materials interactions and Ni ion release of anodized equiatomic NiTi alloy. , 2011, Acta biomaterialia.

[7]  S. Shabalovskaya,et al.  Surface, corrosion and biocompatibility aspects of Nitinol as an implant material. , 2002, Bio-medical materials and engineering.

[8]  S. Stupp,et al.  Porous NiTi for bone implants: a review. , 2008, Acta biomaterialia.

[9]  Yanjun Zeng,et al.  The applications and research progresses of nickel–titanium shape memory alloy in reconstructive surgery , 2010, Australasian Physical & Engineering Sciences in Medicine.

[10]  B Vamsi Krishna,et al.  Fabrication of porous NiTi shape memory alloy structures using laser engineered net shaping. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[11]  Z. Cui,et al.  Bioactive NiTi shape memory alloy used as bone bonding implants , 2004 .

[12]  B. Vamsi Krishna,et al.  Laser Processing of Net-Shape NiTi Shape Memory Alloy , 2007 .

[13]  M. L. Griffith,et al.  Solidification in direct metal deposition by LENS processing , 2001 .

[14]  M. Elahinia,et al.  Manufacturing and processing of NiTi implants: A review , 2012 .

[15]  X. Ren,et al.  Physical metallurgy of Ti–Ni-based shape memory alloys , 2005 .

[16]  H Meier,et al.  The biocompatibility of dense and porous Nickel-Titanium produced by selective laser melting. , 2013, Materials science & engineering. C, Materials for biological applications.

[17]  D. K. Owens,et al.  Estimation of the surface free energy of polymers , 1969 .

[18]  Yung C. Shin,et al.  In Situ Synthesis and Characterization of Shape Memory Alloy Nitinol by Laser Direct Deposition , 2012, Metallurgical and Materials Transactions A.

[19]  A. Pelton,et al.  An overview of nitinol medical applications , 1999 .

[20]  Neil Morgan,et al.  Medical shape memory alloy applications—the market and its products , 2004 .