Modeling of temperature-dependent diffusion and polymerization kinetics and their effects on two-photon polymerization dynamics

Two-photon polymerization (2PP) is an effective technique for the fabrication of complex polymeric 3-D micro/nanofeatures and structures using ultrashort pulses from a NIR laser source. The interaction of laser pulses with photoresponsive resin creates a voxel (volumetric pixel) that defines the resolution of the 2PP process. In this work, we present a mathematical model of the 2PP process that considers the effects of radical diffusion and polymerization kinetics on polymerization dynamics. The increase in temperature during the polymerization process and its effect on polymerization kinetics are considered in the model. The developed model is solved numerically to obtain a better understanding of the polymerization dynamics at various time scales. The effects of diffusion and polymerization kinetics on the growth of voxels are analyzed from the presented simulations. A comparison between high and low pulse repetition rate systems is also presented, showing different polymerization dynamics.

[1]  Koji Ikuta,et al.  Force-controllable, optically driven micromachines fabricated by single-step two-photon microstereolithography , 2003 .

[2]  O. Sugihara,et al.  Fabrication of Calixarene Derivative Optical Waveguide Using Two-Photon Assisted Polymerization Method , 2006 .

[3]  Jesper Serbin,et al.  Three-dimensional nanostructuring of hybrid materials by two-photon polymerization , 2003, SPIE Optics + Photonics.

[4]  Sankaran Thayumanavan,et al.  Optimizing Two-Photon Initiators and Exposure Conditions for Three-Dimensional Lithographic Microfabrication. , 2001 .

[5]  T. Baldacchini,et al.  Two-photon absorption spectrum of the photoinitiator Lucirin TPO-L , 2008 .

[6]  W. Denk,et al.  Two-photon laser scanning fluorescence microscopy. , 1990, Science.

[7]  James H. Strickler,et al.  Two-photon lithography for microelectronic application , 1992, Advanced Lithography.

[8]  G. W. Young,et al.  A Mathematical Model for Photopolymerization From a Stationary Laser Light Source , 2005 .

[9]  John T. Fourkas,et al.  Cover Picture: Multiphoton Fabrication (Angew. Chem. Int. Ed. 33/2007) , 2007 .

[10]  P. R. Patterson,et al.  Optical MEMS and polymers: an overview (Invited Paper) , 2005, International Symposium on Optomechatronic Technologies.

[11]  C. Liu,et al.  Recent Developments in Polymer MEMS , 2007 .

[12]  Tianyue Yu,et al.  An efficient two-photon-generated photoacid applied to positive-tone 3D microfabrication. , 2002, Science.

[13]  Satoshi Kawata,et al.  Improving spatial resolution of two-photon microfabrication by using photoinitiator with high initiating efficiency , 2007 .

[14]  Robert J. DeVoe,et al.  Two-photon microfabrication using two-component photoinitiation systems: effect of photosensitizer and acceptor concentrations , 2003, SPIE Optics + Photonics.

[15]  Boris N. Chichkov,et al.  Three-Dimensional Cell Growth on Structures Fabricated from ORMOCER® by Two-Photon Polymerization Technique , 2007, Journal of biomaterials applications.

[16]  J. Strickler,et al.  Three-dimensional optical data storage in refractive media by two-photon point excitation. , 1991, Optics letters.

[17]  Hong‐Bo Sun,et al.  Three-dimensional focal spots related to two-photon excitation , 2002 .

[18]  Satoshi Kawata,et al.  Scaling laws of voxels in two-photon photopolymerization nanofabrication , 2003 .

[19]  C. Bowman,et al.  Modeling thermal and optical effects on photopolymerization systems , 2003 .

[20]  C. Bowman,et al.  Development of a comprehensive free radical photopolymerization model incorporating heat and mass transfer effects in thick films , 2002 .

[21]  G. Odian,et al.  Principles of polymerization , 1981 .

[22]  M. Wegener,et al.  Direct laser writing of three-dimensional photonic-crystal templates for telecommunications , 2004, Nature materials.

[23]  Bahaa E. A. Saleh,et al.  Acrylic-based resin with favorable properties for three-dimensional two-photon polymerization , 2004 .

[24]  Dong-Yol Yang,et al.  Recent developments in the use of two‐photon polymerization in precise 2D and 3D microfabrications , 2006 .

[25]  Hiroaki Misawa,et al.  Three-dimensional photonic crystal structures achieved with two-photon-absorption photopolymerization of resin , 1999 .

[26]  Satoshi Kawata,et al.  Improved spatial resolution and surface roughness in photopolymerization-based laser nanowriting , 2005 .

[27]  B J Schwartz,et al.  Single-shot two-photon exposure of commercial photoresist for the production of three-dimensional structures. , 1998, Optics letters.

[28]  Boris N. Chichkov,et al.  Two-photon polymerization for fabrication of biomedical devices , 2007, SPIE MOEMS-MEMS.

[29]  Xiang Zhang,et al.  Diffusion-limited photopolymerization in scanning micro-stereolithography , 2004 .

[30]  J. Dechant.  Polymer handbook. 2nd edition. Herausgegeben von J. BRANDRUP und E. H. IMMERGUT unter Mitarbeit von W. MCDOWELL. New York/Chichester/Brisbane/Toronto : John Wiley and Sons 1975. 1364 S., 22 × 28 cm2, geb. £ 79.50 , 1984 .

[31]  B N Chichkov,et al.  Femtosecond laser-induced two-photon polymerization of inorganic-organic hybrid materials for applications in photonics. , 2003, Optics letters.