An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

Abstract While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.

[1]  Martin Charter,et al.  Remanufacturing and product design , 2008 .

[2]  Kevin J. Gaudette,et al.  Remanufacturing: The next great opportunity for boosting US productivity , 2003 .

[3]  W. M. Hauser,et al.  Remanufacturing - an American perspective , 2010 .

[4]  Cyril Aymonier,et al.  Near- and supercritical solvolysis of carbon fibre reinforced polymers (CFRPs) for recycling carbon fibers as a valuable resource: State of the art , 2012 .

[5]  Jun Kato,et al.  Reusing recycled fibers in high-value fiber-reinforced polymer composites: Improving bending strength by surface cleaning , 2012 .

[6]  Rizauddin Ramli,et al.  Disassemblability of end-of-life vehicle: a critical review of evaluation methods , 2011 .

[7]  I. Pulford.  Waste Electrical and Electronic Equipment (WEEE) , 2013 .

[8]  Rebeka Lukman,et al.  Review of sustainability terms and their definitions , 2007 .

[9]  Jan-Anders E. Månson,et al.  Carbon fibre reinforced composite waste: An environmental assessment of recycling, energy recovery and landfilling , 2013 .

[10]  Gary A. Leeke,et al.  Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties , 2015 .

[11]  M. Okayasu,et al.  Mechanical properties and failure characteristics of a recycled CFRP under tensile and cyclic loading , 2013 .

[12]  Erik Sundin,et al.  Product and Process Design for Successful Remanufacturing , 2004 .

[13]  Stephen C. Graves,et al.  Remanufacturing and energy savings. , 2011, Environmental science & technology.

[14]  Keiji Ogi,et al.  Mechanical properties of ABS resin reinforced with recycled CFRP , 2007 .

[15]  K. Kemmochi,et al.  Research in Recycling Technology of Fiber Reinforced Polymers for Reduction of Environmental Load: Optimum Decomposition Conditions of Carbon Fiber Reinforced Polymers in the Purpose of Fiber Reuse , 2011 .

[16]  Review of literature and research on public attitudes , perceptions and behaviour relating to remanufactured , repaired and reused products , 2008 .

[17]  R. D. Adams,et al.  Recycling of Reinforced Plastics , 2014, Applied Composite Materials.

[18]  Jian Gao,et al.  Remanufacturing oriented adaptive repair system for worn components , 2010 .

[19]  Janet M. Twomey,et al.  Recycling of fiber-reinforced composites and direct structural composite recycling concept , 2014 .

[20]  Hong-Chao Zhang,et al.  Remanufacturing Engineering Literature Overview and Future Research Needs , 2011 .

[21]  Shahin Rahimifard,et al.  Ecological and economical assessment of end‐of‐life waste recycling in the electrical and electronic recovery sector , 2008 .

[22]  Winifred Louissa Ijomah,et al.  A MODEL-BASED DEFINITION OF THE GENERIC REMANUFACTURING BUSINESS PROCESS , 2002 .

[23]  Kun-Mo Lee,et al.  Handbook of sustainable engineering , 2013 .

[24]  J. Prins.  Directive 2003/98/EC of the European Parliament and of the Council , 2006 .

[25]  Stephen Pickering,et al.  Recycling technologies for thermoset composite materials—current status , 2006 .

[26]  Jonathan D Linton,et al.  Offering branded remanufactured/recycled products: at what price? , 2014 .

[27]  T. Gutowski,et al.  Life cycle energy analysis of fiber-reinforced composites , 2009 .

[28]  James D. Abbey,et al.  Remanufactured Products in Closed‐Loop Supply Chains for Consumer Goods , 2015 .

[29]  C. A. McMahon,et al.  Development of design for remanufacturing guidelines to support sustainable manufacturing , 2006 .

[30]  Ab Stevels,et al.  Waste Electrical and Electronic Equipment (WEEE) Handbook , 2012 .

[31]  Soraia Pimenta,et al.  Recycling carbon fibre reinforced polymers for structural applications: technology review and market outlook. , 2011, Waste management.

[32]  Robert T. Lund,et al.  Remanufacturing : the experience of the United States and implications for developing countries , 1985 .

[33]  Jie Liu,et al.  Chemical recycling of carbon fibre reinforced epoxy resin composites in subcritical water: Synergistic effect of phenol and KOH on the decomposition efficiency , 2012 .

[34]  Aldo Roberto Ometto,et al.  Ecodesign methods focused on remanufacturing , 2010 .

[35]  George Marsh.  Carbon recycling: a soluble problem , 2009 .

[36]  Rob A. Zuidwijk,et al.  Strategic response to EEE returns: : Product eco-design or new recovery processes? , 2008, Eur. J. Oper. Res..

[37]  Paul W. Griffin,et al.  Towards Cleaner Production: a Roadmap for Predicting Product End-Of-Life Costs at Early Design Concept , 2015 .

[38]  P. Mativenga,et al.  Energy Intensity and Environmental Analysis of Mechanical Recycling of Carbon Fibre Composite , 2014 .

[39]  C. McMahon,et al.  Reducing waste: repair, recondition, remanufacture or recycle? , 2006 .

[40]  S. Pinho,et al.  The effect of recycling on the mechanical response of carbon fibres and their composites , 2012 .

[41]  Benjamin T. Hazen,et al.  The role of ambiguity tolerance in consumer perception of remanufactured products , 2012 .

[42]  Rob Boom,et al.  Recycling of composite materials , 2012 .

[43]  M. Matsumoto,et al.  An analysis of remanufacturing practices in Japan , 2011 .

[44]  Sophie Bernard.  Remanufacturing , 2010 .

[45]  Nicolas Perry,et al.  Improving design for recycling – Application to composites , 2012 .