Synchrotron X-ray microtomography for assessment of bone tissue scaffolds

X-ray microtomography (μCT) is a popular tool for imaging scaffolds designed for tissue engineering applications. The ability of synchrotron μCT to monitor tissue response and changes in a bioactive glass scaffold ex vivo were assessed. It was possible to observe the morphology of the bone; soft tissue ingrowth and the calcium distribution within the scaffold. A second aim was to use two newly developed compression rigs, one designed for use inside a laboratory based μCT machine for continual monitoring of the pore structure and crack formation and another designed for use in the synchrotron facility. Both rigs allowed imaging of the failure mechanism while obtaining stress–strain data. Failure mechanisms of the bioactive glass scaffolds were found not to follow classical predictions for the failure of brittle foams. Compression strengths were found to be 4.5–6 MPa while maintaining an interconnected pore network suitable for tissue engineering applications.

[1]  Julian R Jones,et al.  Bioactive sol-gel foams for tissue repair. , 2002, Journal of biomedical materials research.

[2]  Toshiaki Takezawa,et al.  A strategy for the development of tissue engineering scaffolds that regulate cell behavior. , 2003, Biomaterials.

[3]  S. R. Stock,et al.  X-ray microtomography of materials , 1999 .

[4]  S F Hulbert,et al.  Tissue reaction to three ceramics of porous and non-porous structures. , 1972, Journal of biomedical materials research.

[5]  Ross T. Whitaker,et al.  Partitioning 3D Surface Meshes Using Watershed Segmentation , 1999, IEEE Trans. Vis. Comput. Graph..

[6]  Larry L Hench,et al.  Third-Generation Biomedical Materials , 2002, Science.

[7]  Julian R Jones,et al.  Optimising bioactive glass scaffolds for bone tissue engineering. , 2006, Biomaterials.

[8]  Julian R. Jones,et al.  Nanostructure evolution and calcium distribution in sol-gel derived bioactive glass , 2009 .

[9]  L L Hench,et al.  Gene-expression profiling of human osteoblasts following treatment with the ionic products of Bioglass 45S5 dissolution. , 2001, Journal of biomedical materials research.

[10]  J. Vacanti,et al.  Tissue engineering : Frontiers in biotechnology , 1993 .

[11]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[12]  Konerding Ma.  Scanning electron microscopy of corrosion casting in medicine. , 1991 .

[13]  A I Caplan,et al.  Stem cell technology and bioceramics: from cell to gene engineering. , 1999, Journal of biomedical materials research.

[14]  K. Leong,et al.  The design of scaffolds for use in tissue engineering. Part I. Traditional factors. , 2001, Tissue engineering.

[15]  Larry L. Hench,et al.  Analysis of pore interconnectivity in bioactive glass foams using X-ray microtomography , 2004 .

[16]  Dominique Bernard,et al.  Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds. , 2007, Biomaterials.